Test
Integral LED illumination and magnifying lens make viewing easy
No more reading glass thermometers
Electrical Requirements | 120 V, 60 Hz |
---|---|
Display Type | LED |
Voltage | 120 V |
Hertz | 60 Hz |
Weight (Metric) | 1.8 kg |
Digitally measure three melting points at once
This MP-250 Series Digital Melting Point Apparatus with rotating viewing head ensures each user can analyze samples clearly.
Height (Metric) | 45.1 cm |
---|---|
Electrical Requirements | 100/240 V, 50/60 Hz, 15 DC, 45 W |
Wattage | 45 W |
Includes | Supplied with a pack of 100 capillary tubes, power supply and power cable. |
Display Type | Backlit LCD |
Product Type | Digital Melting Point Apparatus |
Voltage | 100/240 V |
Temperature Range (English) | Ambient to 752°F |
Sensors | 100Ω Pt RTD |
Certifications/Compliance | CE |
Temperature Range (Metric) | Ambient to 400°C |
Hertz | 50/60 Hz |
Weight (Metric) | 2.5 kg |
Height (English) | 17.75 in. |
Capture and display video image of the melt on touch-screen display or download to a PC
MP-250 Series Digital Melting Point Apparatus with rotating viewing head ensures each user can analyze samples clearly.
Designed for maximum safety and ease of use. Select, measure, and display the temperature digitally, ensuring accuracy and avoiding the need for a glass thermometer. Test two samples simultaneously, viewing the melt via a magnifying lens with built-in illumination. Extend the back feet for the optimal viewing angle.
Set a plateau temperature for initial warm-up — unattended warm-up time frees up the user until the plateau temperature is reached. Heating rate continues at 2°C after the warm-up, slowly reaching the melt temperature for greater accuracy.
The MP-250D series digital melting point apparatus allows you to easily view three capillary tube samples simultaneously through the 8x magnifying lens. The adjustable extension arm can be set to different viewing heights making it ideal for multiple users. A rotating viewing head and safety eye piece eliminate glare on the lens and protect you against hot zone. A 13-key membrane keypad offers easy-to-use menus. The conveniently located push button controls allow temperature recording without looking away from the sample. A digital microprocessor with 0.1C resolution provides fast warm-up and accurate temperature control. Units can be calibrated by on site or by the manufacturer/service organization. A calibration kit is required if you choose to calibrate on site.
This melting point apparatus lets you select, measure and display the temperature digitally, ensuring accuracy and repeatability. Easily view the melt using the illuminated magnifying lens. The apparatus allows you to be more productive by testing multiple samples at the same time. Save time, too, by setting a plateau temperature for its initial warm-up. The model, SMP10 provides 300C maximum temperature with 1resolution. It operates at 120 VAC.
Accessories for your melting point apparatusEnsure the accuracy of your melting point apparatusComes with three WHO approved melting point standards—caffeine, vanillin, and sulphanilamide—with purity certificates.
Programmable digital melting point apparatus with beginning/ending recording for pharmacopeia requirements offers selectable ramp rates between 0.2C/minute to 10C/minute with a degree setting of 1C/minute. Store up to two sets (beginning and ending temperatures) of three temperatures in temporary memory; batch memory permanently stores up to 500 sets of results. Unit also connects to computer or printer via RS-232 interface.
Designed for maximum safety and ease of use. Select, measure, and display the temperature digitally, ensuring accuracy and avoiding the need for a glass thermometer. Test two samples simultaneously, viewing the melt via a magnifying lens with built-in illumination. Extend the back feet for the optimal viewing angle.
Set a plateau temperature for initial warm-up — unattended warm-up time frees up the user until the plateau temperature is reached. Heating rate continues at 2°C after the warm-up, slowly reaching the melt temperature for greater accuracy.
Miniature connectors are suited for small wires and mineral insulated cables. Glass-filled nylon construction with hollow pins and molded barriers prevent short circuit. Secure thermocouple wire into positive/negative terminals with screws. Each connector comes in ANSI color coded material: type J-black, type K-yellow, and type T-blue.
Take melting point measurements of up to three samples at once for greater efficiency. Simple to operate, the instructions are printed directly on the unit. Place your sample in a capillary tube and insert it into the aluminum block. Manually set the heating rate between 1°C and 20°C per minute, up to a maximum of 250°C. Lowering the heating rate as you near the expected melting point temperature will increase the accuracy of the reading. Observe the sample through the magnifying lens until the melt occurs and read the melt temperature from the thermometer.
Apparatus is supplied with open-ended capillary tubes. One end should be sealed with a Bunsen burner; or purchase optional capillary tubes separately that are already sealed. Order the optional brass cooling plug to speed up cooling when multiple runs are needed.