Glassware Vacuum Traps
Glassware Vacuum Traps
Labconco™ Liquid Traps
Prevents liquid from entering into pump
Labconco™ Secondary Vacuum Traps
For any mechanically refrigerated freeze-dry system; ensure efficient processing of samples with low eutectic points
Labconco™ Canisters with Stands
Clear polypropylene canisters allow for visual inspection of trap contents
Labconco™ Secondary Trap Canister and Inserts for CentriVap™ System
Help to provide secondary protection to vacuum pumps in evaporation systems
Labconco™ FreeZone™ Freeze-Dry Glass Trap
For use in FreeZone freeze dry units
Cardinal Health™ Medi-Vac™ Guardian™ Suction Canisters
With automatic overflow shutoff valve located inside lid to help prevent cross contamination of regulators and wall vacuum outlets
Labconco™ Vacuum Tubing Kit for CentriVap™ System and RapidVap™
Vacuum Tubing Kit for use with Labconco CentriVap Vacuum Concentrators and RapidVap Evaporators.
Chemglass Life Sciences Vacuum Trap, 32mm Body OD x 250mm Body Length, 13mm OD Side and Inner Tubes
Vacuum Trap, 32mm Body OD x 250mm Body Length, 13mm OD Side and Inner Tubes. Similar to CG-4510 but with top inlet tube bent at a 90º angle.
Chemglass Life Sciences Vacuum Trap Body Only, 71/60
Vacuum Trap Body Only, 71/60. Replacement part for CG421521.
Ace Glass, Inc. Trap, vacuum, 25mm body diameter, 200mm body length, 10mm OD inner & side tube
Trap, vacuum, 25mm body diameter, 200mm body length, 10mm OD inner & side tube
Chemglass Life Sciences Vacuum Trap, 500mL Capacity, Fits 1900mL Dewar Flask, 310mm OAH x 130mm Width, Complete
Vacuum Trap, 500mL Capacity, Fits 1900mL Dewar Flask, 310mm OAH x 130mm Width, Complete. Trap is designed for large volume solvent removal by vacuum. The 40/35 standard taper joint connects trap body with stopper. Connections are 1/2in O.D. Trap is designed to fit into standard CG-1593 through CG-1595 Dewar flasks.
Ace Glass, Inc. Complete 60mm OD vacuum trap, #15 threaded side arm and innertube
60mm O.D. vacuum trap consists of body with Ace-Thred, adjustable inner tube, and nylon bushing with FETFE o-ring. Has #15 threaded side arm. For use with PTFE Ace-Safe connectors, to allow safe, easy tubing connect-disconnect.
Chemglass Life Sciences Vacuum Trap Body Only, 55/50
Vacuum Trap Body Only, 55/50. Replacement part for CG451520.
Chemglass Life Sciences Vacuum Trap, O-Ring, Airfree, Schlenk, Complete
Vacuum Trap, O-Ring, Airfree, Schlenk, Complete. Two-piece vacuum trap with # 20 o-ring joints on both the inlet and outlet ports. The seal between the trap stopper and body is made with a 57mm flat o-ring flange for total grease-free operation. Trap body is 57mm OD x 300mm in length to be used with a 4,300mL Dewar flask (CG-1593-05 or CG-1594-05). Arms on stopper portion connect to AF-0300-03 manifold and AF-0300-06 shut off adapter. Complete item consists of the trap body and stopper, one CG-139-02 horseshoe clamp, one #331 Viton o-ring and two #214 Viton o-rings.
Chemglass Life Sciences Vacuum Trap, Complete, Trap Bottle 54mm OD x 275mm Overall Length, 25mm OD Side and Inner Tubes, 50/50 Jt.
Vacuum Trap, Complete, Trap Bottle 54mm OD x 275mm Overall Length, 25mm OD Side and Inner Tubes, 50/50 Jt. Two piece vacuum trap connected with an inner and outer joint to facilitate cleaning.
- 1
- 2