Test
For any mechanically refrigerated freeze-dry system; ensure efficient processing of samples with low eutectic points
For Use With (Equipment) | Refrigerated freeze-dry system |
---|---|
Temperature Range (English) | −103°F |
Material | Stainless Steel |
Temperature Range (Metric) | −75°C |
For Use With (Application) | Prevent contaminants from migrating into the vacuum pump |
For use in FreeZone freeze dry units
Clear polypropylene canisters allow for visual inspection of trap contents
Help to provide secondary protection to vacuum pumps in evaporation systems
For Use With (Equipment) | CentriVap™ system |
---|
Vacuum Tubing Kit for use with Labconco CentriVap Vacuum Concentrators and RapidVap Evaporators.
Prevents liquid from entering into pump
Vacuum Trap, Two-Piece, with Hose Connectors, Complete. Body O.D.: 38mm; Body Length: 225mm; Joint: [ST] 34/45; Hose Connectors: 3/8 in.. For removal of vapors from a vacuum line by condensation with liquid air or dry ice slurry mixture
Vacuum Trap, 500mL Capacity, Fits 1900mL Dewar Flask, 310mm OAH x 130mm Width, Complete. Trap is designed for large volume solvent removal by vacuum. The 40/35 standard taper joint connects trap body with stopper. Connections are 1/2in O.D. Trap is designed to fit into standard CG-1593 through CG-1595 Dewar flasks.
Trap, body, vacuum, 55/50, 60mm outer body OD, 140mm outer body length below joint
Trap, stopper, vacuum, 24/40, 10mm inner & side tube OD
Bent vertical hose barb vacuum trap with stopper with 29/32 joint. Hose barb for 7/16 or 1/2 tubing.
Vacuum trap & twin chamber, dry ice, #50 Ace-Thred top, easy-action stopcock, #15 Ace-Thred inlet/outlet, complete with bushings and O-rings
Vacuum Trap, Two-Piece, with Hose Connectors, Complete. Body O.D.: 48mm; Body Length: 250mm; Joint: [ST] 45/50; Hose Connectors: 3/8 in.. For removal of vapors from a vacuum line by condensation with liquid air or dry ice slurry mixture
Vacuum Trap, Two-Piece, with Hose Connectors, Complete. Body O.D.: 45mm; Body Length: 250mm; Joint: [ST] 40/50; Hose Connectors: 3/8 in.. For removal of vapors from a vacuum line by condensation with liquid air or dry ice slurry mixture
Vacuum Trap, Two-Piece, with Hose Connectors, Complete. Body O.D.: 60mm; Body Length: 300mm; Joint: [ST] 55/50; Hose Connectors: 3/8 in.. For removal of vapors from a vacuum line by condensation with liquid air or dry ice slurry mixture