Test
The contents of this kit are described as follows: 1.0 mm ID Carbon Fiber Supported Sample Probe Aqueous 6-port valve Valve Pump Tubing Kit Nut and Ferrule Placement Fitting (10) CTFE ferrules, 1/16 Internal Standard Tee Kit Passive Bubbler Tee PEEK Tubing, Tee, Fittings and Ferrules
Nickel Skimmer Cone for iCAP Q
Quartz cyclonic spray chamber, for use with iCAP Q ICP-MS System, low-volume, baffled cyclonic spray chambers efficiently filter out larger aerosol droplets for improved plasma stability.
SPS 4 probe 0.8 mm id with green markers. Inert, FEP sleeved for SPS 4 autosampler.
PVC peristaltic pump tubing - ID 0.508 mm - orange/yellow (3 bridges, flared end). 12 tubings.
Duo Torch (EMT); ICP quartz torch for use with iCAP 6000 Series Duo instruments using; the EMT Torch holder.
Ni Sample cone. 1.1mm diameter orifice for minimal deposition when; analyzing high matrix samples. Solid Ni construction.
3.5 mm Skimmer Cone insert for iCAP Q/Qnova ICP-MS Systems – High Matrix Tolerance Applications
Suit your sample matrices and applications with this comprehensive range of Thermo Scientific™ Peristaltic Pump Tubing for the Thermo Scientific™ iCAP™ Q ICP-MS; all designed for durability and fitness for purpose.
Gain improved plasma stability from the tulip design and easy, push-in insertion with this fully demountable, single piece, Thermo Scientific™ Quartz Torch with connection-free gas supply for our Thermo Scientific™ iCAP™ Q ICP-MS system.All connectivity (argon gas supplies and plasma ignition) is contained within the torch holder to reduce complexity and improve usability.
3.5 mm Skimmer Cone insert for iCAP Q/Qnova ICP-MS Systems – Robust Matrix Tolerance Applications
PVC Standard Pump Hose ID 0.762 Black/Black
This conserves valuable or limited samples eliminates the need to perform time-consuming sample dilutions and allows you to quickly characterize unknown samples.
The PC3 is a small, robust Peltier cooled cyclonic spray chamber. The PC3 offers the advantages of low memory effects, constant temperature, fast rinse-out, and high sample transport efficiency. The cooled outer walls of the PC3 spray chamber enhance long-term signal stability, reduce polyatomic interferences such as oxides, and reduce solvent loading when volatile organic solvents are analyzed. The PC3 has two preset temperatures +2 °C / -5 °C and is ideal for analysis of aqueous or aqueous/organic mixtures. The PC3-LT operates at +2 °C / -20 °C to reduce the solvent load on the plasma for analysis of 100% volatile organic solvents. The sample introduction kit includes: PC-LT Peltier Cooler and Power Supply Baffled Quartz Cyclonic Spray Chamber (N8145402) PFA-ST MicroFlow Nebulizer (N8122192) 0.15 mm I.D. ST Sampling Tubing, 1 m (N8122382) 0.25 mm I.D. ST Sampling Tubing, 1 m (N8122383) 0.5 mm I.D. ST Sampling Tubing, 1 m (N8122384) Tee Connector for Mixing Oxygen and Make-Up Gas, 5
NC0900580 INJECTOR 2.0MM ID QUARTZ