Test
For noncorrosive general purpose gases. Diaphragm-Sensed Single-Stage Regulators are ideal for applications with intermittent short intervals of use.
Includes | Chrome-plated Brass outlet needle valve with 0.25 in. NPTM thread |
---|---|
Type | Gas Regulator |
Diameter (English) Diaphragm | 2.75 in. |
Diameter (Metric) Diaphragm | 7 cm |
Filter Material | Sintered Metal |
Material | Chrome-plated Brass |
For Use With (Application) | For noncorrosive gases requiring short intervals of use |
No. of Stages | Single |
For Noncorrosive General Purpose Gases. Diaphragm-Sensed Dual-Stage Regulators designed for consistent outlet pressure delivery.
Bonnet Material | Brass |
---|---|
Type | Cylinder Regulator |
Relief Valve | Yes |
Connection Type | Outlet needle valve with 0.25 in. NPTM thread |
Diaphragm Material | Neoprene |
Seal Material | Nylon Fabric, Nylon |
For Use With (Application) | Noncorrosive gases, requiring maintenance of a constant delivery pressure until cylinder contents are empty |
No. of Stages | Multi |
Seat Material | Orthane™ |
Gauge | Dual-scale |
Designed for accurate control of gases in low flow applications
Efficiently removes moisture and heavy hydrocarbons from compressed air, electrolytically produced hydrogen, house nitrogen, or other gases with high moisture or hydrocarbon content
Designed for convenient wall mounting of high-purity gas regulators
Includes | 3 ft., Flexible, all Stainless Steel pigtail with armor casing |
---|---|
Type | Protocol Station |
For Use With (Equipment) | Single or dual stage regulator |
For Use With (Application) | Wall mounting of the protocol station provides ease of use, prevents gas regulator damage and improves safety |
With recessed screw holes on bracket sides that facilitate easy wall mounting
Mounting | Wall |
---|---|
Height (Metric) | 11.73 cm |
Dimensions (L x W x H) | 1.87 x 8.12 x 4.63 in. (4.74 x 20.62 x 11.73 cm) |
Width (English) | 8.12 in. |
Length (Metric) | 4.74 cm |
For Use With (Equipment) | Fits cylinders of diameter 10.2 to 35.6cm |
Product Type | Wall Bracket |
Length (English) | 1.87 in. |
Material | Cast Aluminum |
Width (Metric) | 20.62 cm |
Height (English) | 4.63 in. |
Diaphragm-Sensed Dual-Stage Regulators designed for consistent outlet pressure delivery. For Noncorrosive General Purpose Gases.
These Diaphragm-Sensed Single-Stage Regulators are designed for analytical applications with intermittent short intervals of use. For Semi-Corrosive High Purity Gases.
Lightweight, compact, single-stage, lecture bottle regulators for noncorrosive gases
Gas regulator for non-corrosive general purpose gases is designed for analytical applications with intermittent short intervals of use.
For Semi-Corrosive High Purity Gases. These Diaphragm-Sensed Single-Stage Regulators are designed for analytical applications with intermittent short intervals of use.
Pressure Range (Inlet) | 3000 psi |
---|---|
Diameter (English) Gauge | 2 in. |
Operating Temperature Range (English) | -°F to +140°F |
Diaphragm Material | 316L Stainless Steel |
Filter Material | 10μ Sintered |
Material | Stainless Steel |
For Use With (Application) | Semi corrosive gases, extremely high purity gases, mildly corrosive or reactive gases, and toxic gases where slight variations in delivery pressure can be tolerated |
Diameter (Metric) Gauge | 5.08 cm |
Operating Temperature Range (Metric) | -4°C to +60°C |
Type | Gas Regulator |
Connection Type | 0.25 in. NPT outlet port |
Seal Material | PTFE Resin |
No. of Stages | Single |
Seat Material | PCTFE |
For noncorrosive general purpose gases. Single-Stage Regulators feature reliable piston design for precise gas control at high delivery pressure up to 1500PSI and 3000PSI
Type | Gas Regulator |
---|---|
Diameter (English) Gauge | 2.5 in. |
Connection Type | 0.25 in. NPT inlet |
Filter Material | Sintered Bronze |
Material | Brass |
For Use With (Application) | Use in hydrogenation, catalytic reduction, dead-end and pressure testing |
Diameter (Metric) Gauge | 6.35 cm |
No. of Stages | Single |
Seat Material | PCTFE |
Made from materials with surface finish that will not outgas impurities into the gas stream. For high purity noncorrosive gases
Pressure Range (Inlet) | 3000 psi |
---|---|
Diameter (English) Gauge | 2 in. |
Operating Temperature Range (English) | -°F to +140°F |
Diaphragm Material | 316L Stainless Steel |
Filter Material | 10μ Stainless Steel |
Material | Chrome-plated Brass |
For Use With (Application) | Ideal for instrument and OEM applications employing very high purity, noncorrosive gases and gas mixtures where some variations in delivery pressure can be tolerated |
Diameter (Metric) Gauge | 5.08 cm |
Operating Temperature Range (Metric) | -4°C to +60°C |
Type | Gas Regulator |
Connection Type | 0.25 in. NPT outlet port |
Seal Material | Viton™ |
No. of Stages | Single |
Seat Material | PCTFE |
Diaphragm-Sensed Dual-Stage Regulators designed for analytical applications where a consistent outlet pressure and flow are desired. For Noncorrosive High Purity Gases.
Pressure Range (Inlet) | 3000 psi |
---|---|
Pressure Range (Outlet) | 30 in. Hg Vac-100 psi |
Outboard Leakage | 2 x 10-8 atm.cc/sec. heat inlet pressure: 1500 psi |
Operating Temperature Range (English) | -40°F to +165°F |
Diaphragm Material | 316L Stainless Steel |
Material | Nickel-plated Brass |
Knob Material | ABS Plastic |
For Use With (Application) | Cylinder, research laboratories, gas chromatography, process analyzers, petrochemical industry, power plant |
Operating Temperature Range (Metric) | -40°C to +74°C |
Includes | Diaphragm valve |
Bonnet Material | Nickel-plated Brass |
Gauge Pressure (English) | 2 in. |
Front Panel Thickness | 0.25 in. |
Type | Gas Regulator |
Gauge Pressure (Metric) | 5.08 cm |
Connection Type | 0.25 in. GENLOK |
Max. Outlet Pressure | 250 psi |
Weight (English) | 4.03 lb. |
Seal Material | Metal |
Inboard Leakage | 2 x 10-8 atm.cc/sec. He |
No. of Stages | Dual |
Seat Material | PCTFE |
Weight (Metric) | 1.82 kg |