Ion Chromatography Components and Accessories
Ion Chromatography Components and Accessories
Thermo Scientific™ POROS™ MabCapture™ A/G Select Resin
MabCapture A/G Select allows antibody purification with high dynamic binding performance at low linear flow rates and maintains superior binding capacity at high linear flow rates
Thermo Scientific™ POROS™ XS Strong Cation Exchange Resin
POROS XS is the first high-capacity, high-resolution resin that allows loading to >100 mg/mL in the presence of 15 mS/cm NaCl, while delivering unprecedented separation capability
Thermo Scientific™ Dionex™ ICS-6000 EG Eluent Generator Kit
Run ion chromatography gradients as easily as isocratic by installing the Thermo Scientific™ Dionex™ EG Cartridge Kits in the Dionex ICS-6000 EG Eluent Generator.
Thermo Scientific™ Dionex™ Pump Preventative Maintenance Kits for HPIC™ Systems
Thermo Scientific™ Dionex™ Pump Preventive Maintenance Kits includes the spare parts necessary to perform recommended annual pump maintenance on your Thermo Scientific™ Dionex™ HPIC™ System.
Thermo Scientific™ POROS™ XQ Strong Anion Exchange Resin
POROS XQ is a high-capacity, high-resolution, salt-tolerant resin that enables >140 mg/mL dynamic binding capacity while delivering exceptional separation performance
Thermo Scientific™ POROS™ MabCapture™ A Select Resin
MabCapture A Select a monoclonal antibody purification resin provides high dynamic binding at low linear flow rates and maintains superior binding capacity at high linear flow rates
Thermo Scientific™ POROS™ HQ 50 µm Strong Anion Exchange Resin
POROS XQ is a high-capacity, high-resolution, salt-tolerant resin that enables >140 mg/mL dynamic binding capacity while delivering exceptional separation performance
Thermo Scientific™ POROS™ MabCapture™ G Select Resin
MabCapture G Select antibody affinity purification resin provides high dynamic binding at low linear flow rates and maintains superior binding capacity at high linear flow rates
Thermo Scientific CONCENTRATE FOR AN AS14
AS14 Eluent Concentrate (100x), for Anion and Cation Determinations, is a Ready-to-Dilute Eluent Concentrate for the IonPac AS14 Columns, Contains 0.35 M Carbonate/0.10 M Bicarbonate. It is Recommended for Fast, Reliable Eluent Preparation •Available as a 100X concentrate containing 0.80M carbonate/0.10M bicarbonate •Makes 25L of sodium carbonate/bicarbonate eluent •Prepared by the dissolution of high-purity chemicals in >18.2MOcm deionized water, which was tested by ion chromatography for ionic contaminants •Actual concentration is within ±2.5% and was determined by one or more proven reliable methods of analysis such as ion chromatography, UV spectrophotometry.
Thermo Scientific Dionex IC PEEK Viper Fitting | 0.18mm/0.007"""" x 165mm
Thermo Scientific Dionex IC PEEK Viper Fittings provide “worry-free”, finger-tight connections with virtually zero dead volume. The Dionex IC PEEK Viper fitting system ensures a correct tubing face seal, ensuring consistently low volume connections without the use of tools.They are compatible with all current Thermo Scientific Dionex IC systems, columns, and consumables.
Thermo Scientific™ Dionex™ ICS-6000 DC Compartment Valves
DC Compartment Valves are for use with the ICS-6000 ion chromatography system.
Thermo Scientific Dionex™ Combined Seven Anion Standard I
Ion Standards are used for a variety of routine anion, cation, and standard determinations. Increase your productivity and reduce standard preparation errors with Thermo Scientific™ Dionex™ Ion Standards for ion chromatography. Available for routine anion and cation determinations, these single and combined ion standards are made with high purity, reagent-grade chemicals and water. Each standard is NIST traceable and includes a Certificate of Analysis.
Thermo Scientific NEBULIZER FOR I CAP Q
PFA-ST MicroFlow Nebulizer. Select a Thermo Scientific™ Nebulizer to meet your laboratory's needs from this range compatible with the Thermo Scientific™ iCAP™ Q ICP-MS analyzer. The standard cyclonic spray chamber on the iCAP Q ICP-MS system accepts all types of nebulizers with a 6mm outside diameter.