Test
For use with 6 position Omni Reaction Station System (115V model)
Screening tool that can be used in laboratories
Run up to 10 reactions simultaneously at same controlled temperature and stirring rate
Stir-Pak Mixer Support Stand, 5/8" Dia Shaft; 29" H, Update clamps, mounts, shafts and propellers to accommodate new protocols. Replacement parts keep your overhead mixer running smoothly.
High-shear dispersing impellers create a cutting, tearing action to efficiently shred and disperse solids. Provide low flow with highest shear.
Axial Flow Impellers (LIGHTNIN A-100) with SUPERPITCH design — 1.5 pitch ratio for greater batch mixing capabilities. Standard axial flow; use for wetting dry powders.
Update clamps, mounts, shafts and propellers to accommodate new protocols. Replacement parts keep your overhead mixer running smoothly.
Replacement parts keep your overhead mixer running smoothlyRequires SP (55008-06) or SD (55008-07) Mixer ControllerMotor capabilities are based on the controller. The mixer motor has through-shaft capability and features a user replaceable keyless chuck. Bracket hardware is preinstalled to enable installation of the adjustable tilt mounting bracket.
Caframo Pitched blade impeller; 2-1/4" dia (Stainless Steel)
Replacement parts keep your overhead mixer running smoothlyMust be used with Mixer Motor 55008-08The precision digital controller is used to turn on and set the speed, timer, direction, and torque limits for the mixer motor.
Accessories improve use of your products and increase efficiency. Spare parts help keep your equipment running smoothly.
Update clamps, mounts, shafts and propellers to accommodate new protocols. Replacement parts keep your overhead mixer running smoothly.
These new heavy-duty mixer stands are constructed from heavy gauge steel and square steel tubing to accommodate loads of up to 200 lbs. Use with any of our clamp mount mixers. Stands allow you to easily raise or lower your mixer into drums or tanks up to 48" in diameter. Each stand includes a 12" square base plate with four 9/16" mounting holes for permanent attachment to floors or dollies. Use the manual stand for lighter mixers. Manual stand lets you move mixer up or down in 1" increments; clevis pin holds the mixer in place. The winch stand is ideal for heavier mixers. Raise the mixer to any height; winch holds the mixer in place. Choose the air-powered stand for your heaviest mixers. Air motor holds mixer in place at any level.
Axial Flow Impellers (LIGHTNIN A-100) with SUPERPITCH design — 1.5 pitch ratio for greater batch mixing capabilities. Standard axial flow; use for wetting dry powders.
Optimize your stirring needs and workspace with this completely customizable stirrer. Control module, power cord and AC adapter.