Test
Vacuum-Type Glass Membrane Holder, glass reservoir, 47 mm, 300 ml volume, membrane filter accessories
Produced from borosilicate glass and available with a choice of support screen. Whatman™ Vacuum-Type Glass Membrane Holder is suitable for aqueous and organic solvent filtration. The funnel seal ensures that the sample does not bypass the membrane and that particulates are retained on the surface of the membrane.
Material | Borosilicate Glass |
---|
Replacement PTFE-Coated Support Sieve for MD050 Series Pressure Filtration Manifolds.
PTFE Back Pressure Sieve for use with MD142 Series Pressure Filtration Manifolds.
PZ 001 Tweezers are stainless steel forceps with smooth angled jaws (104 mm long) that are highly suitable for handling membrane filters.
AS610/3 Multiple Vacuum Filtration Apparatus, six-place vacuum filtration system, stainless steel 500 ml, 47/50 mm, support screen, with rapid closure clamp
Description | Vacuum filtration system |
---|---|
Material | Stainless Steel |
Autoclavable | Autoclavable |
This Lower Part is a replacement part for Whatman™ GV 050 Series Vacuum Filtration Manifolds.
This Lower Section is a replacement part for Whatman™ GV 050 Series Vacuum Filtration Manifolds.
PTFE Sieve Support for use with MD142 Series Pressure Filtration Manifolds.
Replacement stainless steel funnel assembly for use with MV050 Vacuum Filtration Manifolds
Made of stainless steel, MV050 Vacuum Filtration Manifolds are ideal for microbiological applications. They can be used up to 200°C, are autoclavable, and can be sterilized by dry heat up to 180°C. Supplied with standard or rapid closure clamps.
Disposable | Reusable |
---|---|
Temperature (English) Max. | 200°C |
Temperature (Metric) Max | 392°F |
Volume (Metric) | 500 mL |
Material | Stainless Steel |
For Use With (Application) | Microbiology, Biochemistry, and Hydrobiology. Residue Analysis, Precipitate Analysis, and Contamination Testing (Food and Beverage, Pharmaceutical, and Cosmetic Industries) |
Sterility | Non-sterile |
Filtration Area | 12.5 cm2 |
Connectors | Rubber Stopper |
Series | MV050 |
Type | Vacuum Filtration Manifold |
For Use With (Equipment) | MV050 Manifold |
Diameter (Metric) Filter | 47/50 mm |
Autoclavable | Autoclavable |
Cytiva Pressure Filtration Manifolds come in PTFE or stainless steel. Equipped with infusion cylinders, they are suitable for batch filtration from 20 mL, filtration of liquids/gases, ‘sterile’ filtration of serum, or clear filtration of viscous media using membranes, paper, or glass fiber discs.
Disposable | Reusable |
---|---|
Type | Pressure Filtration Manifold |
Temperature (English) Max. | 392°F |
Description | Pressure filtration device |
Temperature (Metric) Max | 200°C |
For Use With (Application) | Pressure Filtration |
Sterility | Non-sterile |
Closure Clamp for use with MD142 Series Pressure Filtration Manifolds.