Filtered Search Results
Fisherbrand™ Castaloy™ Double-Buret Clamp
Holds two burets from micro to 100mL size
Thermo Scientific™ Nalgene™ Self-Zeroing Buret Filler Kit
Save time and increase convenience. This filler kit converts any conventional glass or plastic 25mL or 50mL buret into an automatic-filling, self-zeroing buret.
BrandTech™ BRAND™ Reservoir Bottles for Automatic Burette
Spare 2000mL bottles for automatic burette manufactured of boro.3.3 glass.
|For Use With (Equipment)||Automatic Burette|
|Capacity (Metric)||2000 mL|
DWK Life Sciences Kimble™ O-Ring Glass Connector Cap
Size 15 Cap and O-ring to seal flasks or 216040 HI-VAC™ manifold.
DWK Life Sciences Kimble™ KIMAX™ U-shaped drying tube, Atomizer connector tube
Replacement Parts - Drying tube, connecting tube, and rubber stopper for 17124F Buret
DWK Life Sciences Kimble™ KIMAX™ Buret Atomizer
Replacement Parts - Atomizer for 17124F Buret
Chemglass Life Sciences 1000mL Leveling Bulb
1000mL Leveling Bulb. Replacement part for CG181803 gas evolution measurement apparatus.
Chemglass Life Sciences 500mL Leveling Bulb
500mL Leveling Bulb. Replacement part for CG181803 gas evolution measurement apparatus.
Metrohm USA CYLINDER GLASS BOROSILIC 10ML
CYLINDER GLASS BOROSILIC 10ML
Cole-Parmer Cole-Parmer Burette and Burette Stand Kit; Burette, Clamp, and Stand
Bundled for convenience to save you money, this Class B burette meets basic measuring and dispensing requirements. It is complete with a burette clamp and lab stand. This handy kit comes with a nickel-plated zinc and double burette clamp, along with a clamp holder and lab stand with aluminum rod and chemical-resistant porcelain base. The burette clamp can hold up to two burettes. The kit comes with a 50-mL burette.
Eisco™ Double Wooden Burette Stand
This double wooden burette stand is made from seasoned hardwood and can accomodate 2 burettes up to 10 mm dia. Wooden base (300x100 mm) with threaded hole, wooden support dowel (460x16 mm), and clamp with 3 nylon thumb screws included.
Eisco™ Single Wooden Burette Stand
This single wooden burette stand is made from seasoned hardwood and can accomodate 1 burette up to 10 mm dia. Wooden base (200x100 mm) with threaded hole, wooden support dowel (460x16 mm), and clamp with 2 nylon thumb screws included.
Eisco™ Polypropylene Burette Clamp
Eisco™ Polypropylene Burette Clamp feature a spring-loaded jack and two tapered wedges to assure a snug and safe fit.
Eisco™ Burette Clamps
Constructed of cast sheet metal, these burette clamps have a built-in boss head for easy attachment to a rod stand
|For Use With (Equipment)||Burette|
|No. per Case||1|
|No. per Pack||1|
|For Use With (Application)||Titration|
Eisco™ Double Polypropylene Burette Clamp
This double polypropylene burette clamp is made from corrosion resistant polypropylene and includes 2 tapered wedges for mounting on 10 mm or 12.5 mm rods. Can accommodate up to 2 burettes up to 15 mm in diameter. A spring loaded jack provides a strong and secure grip on burettes.
GSC Go Science Crazy Pinchcock Attachment for Buret
Tubing slips over the end of any buret.
Eisco™ Single Sheet Metal Burette Clamp
This single metal burette clamp is made from die-pressed sheet metal and includes a built in boss head. It can accommodate 1 burette (20 mm max. dia.) and can be mounted on a rod up to 10 mm in diameter with the screw adjustment. 4 vinyl covered fingers provide a strong and steady grip.