Gas Dispersion Tubes
Gas Dispersion Tubes
PYREX™ Gas Dispersion Tubes With Fritted Cylinders
Used to disperse or scrub gas in liquids.
PYREX™ Gas Dispersion Tubes With Fritted Discs Concentric with Stem.
Center stems permit insertion through smaller openings.
Bel-Art™ SP Scienceware™ Gas Dispersion Tubes
Suitable for insertion into small openings
Chemglass Life Sciences Gas Dispersion Tube, 20mm Diameter Medium Frit

Gas Dispersion Tube, 20mm Diameter Medium Frit. Fritted gas dispersion tube with tubing sealed on one end.

Chemglass Life Sciences Gas Dispersion Tube, Micro, Coarse Frit

Gas Dispersion Tube, Micro, Coarse Frit. Micro size gas dispersion tube having a frit 7mm O.D. x 12mm. Stem is 6mm O.D. x 100mm long.

Chemglass Life Sciences Gas Dispersion Tube, Medium Frit

Gas Dispersion Tube, Medium Frit. Hollow fritted cylinder at the end of an 8mm O.D. tube. Cylinder is approximately 12mm O.D. x 20mm long. Overall length is approximately 10 inches.

Chemglass Life Sciences Gas Dispersion Tube, Coarse Frit

Gas Dispersion Tube, Coarse Frit. Hollow fritted cylinder at the end of an 8mm O.D. tube. Cylinder is approximately 12mm O.D. x 20mm long. Overall length is approximately 10 inches.

Chemglass Life Sciences Gas Dispersion Tube, Micro, Medium Frit

Gas Dispersion Tube, Micro, Medium Frit. Micro size gas dispersion tube having a frit 7mm O.D. x 12mm. Stem is 6mm O.D. x 100mm long.

Ace Glass, Inc. 7mm OD x 210mm porosity A filter stick

7mm O.D. x 210mm gas dispersion tube for fine dispersion. Porous tip is approximately 7mm O.D. x 10mm, and fits a #7 Ace-Thred. Supplied with porosity A (145-174 micron) filter stick.

Ace Glass, Inc. 500mm porosity C filter tube with porous fritted glass tip.

500mm porosity C filter tube with porous fritted glass tip.

Ace Glass, Inc. 5mm OD x 210mm porosity C filter stick

5mm O.D. x 210mm gas dispersion tube for fine dispersion. Porous tip is approximately 5mm O.D. x 10mm. Supplied with porosity C (25-50 micron) filter stick.

Ace Glass, Inc. 250Mm 15° Gas Tube,145-174Mic

250mm gas dispersion tube with 145-174 micron porosity fritted tip, for use with #7 Ace-Threds. Tube is bent 15° to allow positioning inside flask to avoid stirring paddles, and reach close to the bottom of the flask.

Chemglass Life Sciences Gas Dispersion Tube, Fine Frit

Gas Dispersion Tube, Fine Frit. Hollow fritted cylinder at the end of an 8mm O.D. tube. Cylinder is approximately 12mm O.D. x 20mm long. Overall length is approximately 10 inches.

Chemglass Life Sciences Gas Dispersion Tube, Extra Coarse Frit

Gas Dispersion Tube, Extra Coarse Frit. Hollow fritted cylinder at the end of an 8mm O.D. tube. Cylinder is approximately 12mm O.D. x 20mm long. Overall length is approximately 10 inches.

Chemglass Life Sciences Gas Dispersion Tube, Large Capacity, Fritted, Coarse Porosity

Gas Dispersion Tube, Large Capacity, Fritted, Coarse Porosity. Large capacity gas dispersion tube having a frit 25mm O.D. x 70mm long. Stem is 16mm O.D. x 200 mm above the frit. Overall length is approximately 280mm.

Ace Glass, Inc. 250MM POROSITY B TUBES

Gas dispersion tube with porous fritted tip for use with #7 Ace-Threds. Tube is bent 15 degree to allow positioning inside flask to avoid stirring paddles and yet reach close to bottom of flask.
