Solvent Recovery Condensers
Solvent Recovery Condensers
Heidolph™ Rotavac Vario Condenser Units
For use with Heidolph Rotavac Vario Contol, Vario Tec or Vario Pumping Units
Heidolph™ Glassware - Dry Ice Condenser Jacket
For low-boiling solvents
Heidolph™ Glassware - G3 Glass Set
Vertical condenser for all standard distillations
Corning™ PYREX™ Friedrichs Condensers
Affords very efficient operation
MilliporeSigma™ Supelco™ Soxhlet Condensers
Available in three sizes
Chemglass Life Sciences Condenser, Friedrichs, 330mm, 24/40 Joint
Condenser, Friedrichs, 330mm, 24/40 Joint. Condenser has a specially formed spiral inner tube providing a long vapor path, ensuring good heat transfer and anti-flooding characteristics. Condenser has a standard taper outer joint at a 15º angle to the condenser and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.
Chemglass Life Sciences Condenser, Concentrator, 325mm, 24/40 Joint, 200mm Inner Tube Height
Condenser, Concentrator, 325mm, 24/40 Joint, 200mm Inner Tube Height. Vapors rise to the top of inner tube then travel downward and condense in this highly efficient concentrator. Condensate drains through the side tube which has a standard taper inner joint the same size as the lower inner uptake joint. Serrated hose connection for connecting to vacuum source. Hose connections for both the cooling jacket and vacuum source have an O.D. of 10mm. Available with detachable hose connections on a special order basis.
Chemglass Life Sciences Vapor Tube, Steam Duct, 45mm, 24/40 Joint, Compatible with Buchi Rotary Evaporators, Combi-Clip Not Included, 170mm Approx OAL
Vapor Tube, Steam Duct, 45mm, 24/40 Joint, Compatible with Buchi Rotary Evaporators, Combi-Clip Not Included, 170mm Approx OAL. Replacement Vapor tubes compatible with Buchi rotary evaporators. Thread is made for use with standard Combi-Clip. Available in the 4 listed sizes. NOT SUPPLIED WITH COMBI-CLIP.Dimension “A”:CG-1317-20: 45mm
Ace Glass, Inc. Condenser, coiled, 24/40 top & bottom, 200mm jacket, size D hose barbs
CONDENSER COILED 200MM BARBS
Ace Glass, Inc. 24/40 side and bottom Friedrichs condenser, #7 inlet bushing and tube, 250mm jacket, size D hose barbs
24/40 side and bottom Friedrichs condenser, #7 inlet bushing and tube, 250mm jacket, size D hose barbs
Chemglass Life Sciences Condenser, Friedrichs, 330mm, 24/40 Inner Joint
Condenser, Friedrichs, 330mm, 24/40 Inner Joint. Similar to CG-1210 but with the 24/40 outer joint replaced with a serrated hose connection for use with a drying tube. This style condenser is used primarily in Soxhlet extractions or in reflux mode. Hose connections have an O.D. of 10mm at the middle serration.
Ace Glass, Inc. Condenser, Friedrichs, 24/40 top, 45/50 bottom, size D hose barbs
CONDENSER FRIEDRICHS 45/50 BTM
Ace Glass, Inc. Condenser, Friedrichs, 29/42 top & bottom, size D hose barbs
CONDENSER FRIEDRICHS 29/42
Organomation 8 Position ROT-X-TRACT-LC Extractor
The ROT-X-TRACT-LC is designed to accommodate up to eight (8) Corning Accelerated One-Step apparatuses. The Corning Accelerated One-Step extraction apparatus combines continuous liquid-liquid extraction and concentration into one step. A modified Friedrichs condenser is used to reduce overall height to accommodate traditional laboratory hood specifications; however, Allihn condensers can be substituted per customer request. The hydrophobic membrane allows the organic solvent to circulate through the 1-liter sample bottle continuously until the extraction is complete. By incorporating a stop-cock assembly and 3-ball Snyder column, the Corning One-Step extractor can both extract desired analytes as well as evaporate solvent from the end by-product within the same cycle. The Corning One-Step extractor comes with an electronic side control box which enables the operator to program specific bath temperatures and time cycles to stay in compliance with the designated methodologies.
Ace Glass, Inc. Condenser, Friedrichs, 29/42 top & bottom, #7 Ace-Safe hose connectors for 1/4in ID tubing
CONDENSER FRIEDRICHS 29/42 JTS
- 1
- 2