Heating Elements and Supports
Heating Elements and Supports
HANNA INSTRUMENTS INC COD Test Tube Heater Thermoreactor
The HI839800 COD Test Tube Heater is an easy to use thermoreactor constructed of durable materials. The aluminum block incorporates a 25 vial capacity and a well for a reference temperature probe. Its well-marked user interface provides intuitive operation, equipped with two arrows to set the built-in timer and a temperature button with two predefined temperature settings: 150C and 105C. Additional features include status indicator lights, a thermal fuse to prevent overheating, and continuous LCD display.Low and high temperature alertsBuilt-in countdown timerStatus indicator lights
Grainger 6' SLF REG HEATING CABLE 120VA
6 ft. Self Regulating Heating Cable, Wet or Dry, Max. Circuit Length 200 ft., 120VAC
Thermo Scientific HEAT EXCHANGE SENSOR
Heat Exchange Sensor for Thermo Ultra-low Temperature Freezer.
PETROLEUM ANALYZER CORPORATION HEATER BASE PLATE 38MM OPTIDIS
NC0672155 HEATER BASE PLATE 38MM OPTIDIS
Glas Col LLC Insulating Mantle
Fabric insulating top for 250ml 1, 2 or 3 neck spherical flask.With no heat serves to reduce vapor condensation on top half of flask and to protect your glassware. For use with aluminum housed heating mantles.
Chemglass Life Sciences HEATER BLOCK ADAPTER
Heater Block OptiChem adapter is designed to fit all hot plate stirrers with a 135mm diameter top plate.
MOUSER ELECTRONICS DC FANS DC FAN, 80X80X15MM, 12
DC Fans DC Fan,80x80x15mm, 12VDC,37CFM, 1.96W,34.7dBA, 3000RPM,Vapo, Auto RestartRoHS Compliant
Azzota Corp Temperature Probe For Heating Mantles, Length 9.5 Inch (240mm), Din Connector, 5 Pins
Temperature Probe for Heating Mantles..Length 9.5 inch (240mm), DIN connector, 5 pins
Glas Col LLC Control
Percentage Timerwhich pulses full line voltage to each postion according to dial setting. For 3 place RJ (jigh temp) or RX (low temp) Combo Mantle 120V, 12A
Chemglass Life Sciences Glas-Col Mantle Extension Support for 5000mL Series O Mantle, 11 1/8in ID
Glas-Col Mantle Extension Support for 5000mL Series O Mantle, 11 1/8in ID. This lattice mount support holds spherical and hemispherical Glas-Col Series O mantles up to 5-liter capacity. The steel support, with its fabric strap basket, is strong, handy and durable. Attaches easily to stable ring stands or distillation racks. Supports are painted gray. This mantle support is made from 1/2in diameter rod.
- 1
- 2