Test
For Flame Ionization Detector (FID).
Flame Ionization Detector (FID) jet, universal fit, 0.011 inch id.
Kit includes: detector assembly with heater and sensor, heater block, igniter, programmable pneumatics, and controls for detector combustion gases. Requires, but does not include, amplifier (N6120162) and AutoSystem XL firmware revision 3.3 or higher. The AutoSystem XL must be PPC ready. If not, a PPC upgrade kit (N6120146) is required.
Achieve extremely sensitive detection of organic compounds over a wide linear dynamic range using the Thermo Scientific™ iConnect™ Flame Ionization Detector (FID) for TRACE™ 1300 and 1600 Series GC systems. The detector's small cell volume and rapid acquisition response make it ideal for both standard and fast chromatography.
FID JET UNIVERSAL FIT 0.018 ..
NiCat Reaction Tube for Halogens, Size: 3.45 in.
For use with Flame Ionization Detector (FID).
Not compatible with the FID detector on the Clarus 690 and 590 GCs. Refer to the Clarus 590/690 consumables reference guide for more details.
Designed with space saving in mind, it sits directly under the GC to conserve bench space. You can also apply the FID gas station to GCMS systems with the simple addition of a drawer tray for the MS to rest on. If you want to benefit from the space saving design, but only require a H2 generator, that is also an option. Air Flow Rate: 1500 mL/min H2 Flow Rate: 150 mL/min Zero Air Flow Rate: 5 L/min Zero Air Purity: <0.1 ppm Certifications: CE, CSA, FCC
NC2116546 CHARCOAL GC/FID ANALYSIS
For use with Nitrogen-Phosphorous Detector (NPD).
Not compatible with the FID detector on the Clarus 690 and 590 GCs.
Also available in brown (N6103225).
For use with Auto-Ignite Flame Ionization Detector (FID).