Single Use Bioreactor Vessels
Single Use Bioreactor Vessels
Thermo Scientific™ Standard Single-Use Bottle Assembly System, PETG, 2-port cap set
Thermo Scientific™ Polycarbonate Single-Use Bottle Assembly System includes a Nalgene Square Polycarbonate Bottle, a 53 B ported closure with one vent filter line and two 1/4-in plugged connection lines.
Thermo Scientific™ Standard Single-Use Bottle Assembly System, polycarbonate, 2-port cap set
Thermo Scientific™ Polycarbonate (PC) Single-Use Bottle Assembly System includes a Nalgene Square Polycarbonate Bottle, a 38 to 430 mm ported closure with one vent filter line, and one 1/8-in plugged connection line
Thermo Scientific™ Standard Single-Use Bottle Assembly System, PETG, 3-port cap set, 2 L
Thermo Scientific™ PETG Single-Use Bottle Assembly System includes a Nalgene Square PETG Bottle, a 53 B ported closure with one vent filter line, and two 1/4-in plugged connection lines
Thermo Scientific™ Standard Single-Use Bottle Assembly System, polycarbonate, 3-port cap set, 2 L
Thermo Scientific™ PETG Single-Use Bottle Assembly System includes a Nalgene Square PETG Bottle, a 38 to 430 mm ported closure with one vent filter line and one 1/8-in plugged connection line.
Cytiva (Formerly Pall Lab) iCELLis Nano Single-Use Bioreactors 200ML, 4M
iCELLisNANO, BIOM, 200ML, 4M, C1.5, NS
Ace Glass, Inc. 600mL jacketed pressure reactor, complete with #11 Ace-Thred inlet/outlets, 60mm Ace-Thred 4 neck head, 50mm bottom valved adapter, 100 micron PE & 350 micron PP filter supports, stir shaft, bearing, condenser, addition funnel, clamp & O-rings
600mL jacketed pressure reactor, complete with #11 Ace-Thred inlet/outlets, 60mm Ace-Thred 4 neck head, 50mm bottom valved adapter, 100 micron PE & 350 micron PP filter supports, stir shaft, bearing, condenser, addition funnel, clamp & O-rings
MilliporeSigma Single-use 3L stirred tank bioreactor (green), 2/pk
A single-use, stirred tank bioreactor designed for the non-GMP cultivation of mammalian cell lines. Its rigid design includes a semi-hemispherical shaped polycarbonate vessel, a multi-port high-density polyethylene (HDPE) headplate, a scoping marine impeller, both open pipe and sintered spargers, weldable C-Flex tubing, and all necessary gas inlet and outlet filters.
Biosurface Technologies Corp CDC Biofilm Reactor without stir plate (CBR 90-2)
The CDC Biofilm Reactor consists of eight (8) polypropylene coupon holder rods suspended from a UHMW-polyethylene ported lid. Each coupon holder rod can accommodate three (3) 1/2-inch (12.7 mm) diameter coupons, for a total of twenty-four (24) coupons. The lid (with coupon holders and coupons) is mounted in a 1-liter glass vessel with side-arm discharge port. A liquid growth media or biocide is circulated through the vessel while mixing and shear is generated by a magnetic stir bar and vane rotated by a magnetic stir plate.The CDC Biofilm Reactor is completely autoclavable and reuseable. The total liquid volume is approximately 350 ml. More than forty (40) coupon materials are available, including plastics, metals, and ceramics.
Bellco Glass, Inc. Manufactured from type 1 class a Borosilicate glass. Includes 4 or 6 45mm polypropylene blue screw caps and pouring rings, also 1 100mm polypropylene blue cap for the center. Suitable for all cell culture fermentation. Compatible with bellco over head dri
Manufactured from type 1 class a Borosilicate glass. Includes 4 or 6 45mm polypropylene blue screw caps and pouring rings, also 1 100mm polypropylene blue cap for the center. Suitable for all cell culture fermentation. Compatible with bellco over head dri
STEMCELL Technologies PBS-MINI 0.5 MAG Single-Use Ve
Single-use vessels with bottom port 0.5 MAG - 1/pack
Ace Glass, Inc. 6L Instatherm filter reactor body with 150mm ID grooved top flange, #80 bottom thread, 150mm IDx350mm depth, with CAPFE O-ring and power cord, 120v/10amp max
6L Instatherm coated filter reactor body with a 150mm I.D. grooved top flange for connection to a reaction head with the use of a quick release clamp, and a #80 Ace-Thred bottom thread for use with a bottom adapter with a filter support and drain valve. Instatherm provides safer, rapid heating, and can be operated at 115v with ACE Proportional Temperature Controllers, or with a Powerstat. Reactor body supplied with a CAPFE o-ring and a power cord. Dimensions: 150mm I.D. x 350mm D.
Foxx Life Sciences EZBio MTO Single Use (SUT) Media Bottle Assembly, 500mL, PETG, VersaCap 38-430, 2 Port (2x) 1/4 HB Adapter, Non-Sterile, 10/CS
Foxx Life Sciences EZBio Made To Order MTO 500mL PETG (Polyethylene Terephthalate Glycol-modified) Single Use Bottles. The EZBio MTO Single-Use Non Sterile PETG Media Bottle Assembly is an Innovative and Cost-Efficient Solution. Assemblies includes a PETG Bottle, Open-Cap, 2-Ported Adapter (Insert) with 2x 1/4" (6.4mm) Hose Barb Ports and one extra closed cap for storage. Bottle volumes range from 125ml to 2L. 125ml to 1000mL (1L) bottle assemblies come with an open-top 38-430 cap and two port adapter with 2x 1/4" (6.4mm) hose barbs. 2L Bottles come with an open top 53B VersaCap Closure and two port adapter with 2x 1/4" (6.4mm). Assemblies are made entirely with USP Class VI components and are perfect for Fluid Transfer and Storage Applications.
Bellco Glass, Inc. Manufactured from type 1 class a Borosilicate glass. Bottom indent and 3 vertical baffles for optimal mixing. Sidearm cap: 45mm Center cap: 100mm Dimensions: 245" x 135" Flask size: 1l
Manufactured from type 1 class a Borosilicate glass. Bottom indent and 3 vertical baffles for optimal mixing. Sidearm cap: 45mm Center cap: 100mm Dimensions: 245" x 135" Flask size: 1l
Ace Glass, Inc. 5000mL, two-piece jacketed pressure reactor, complete with#15 Ace-Thred inlet/outlets, 150mm head with #15 center, (4)#15, (1)#7 side necks, addition funnel, condenser, pressure manifold and stirring assembly
5000mL, two-piece jacketed pressure reactor, complete with#15 Ace-Thred inlet/outlets, 150mm head with #15 center, (4)#15, (1)#7 side necks, addition funnel, condenser, pressure manifold and stirring assembly