Test
Male Luer Lock, Needleless Injection Site, Swabable, Polycarbonate, Silicone
Complete, one-piece 1000mL jacketed pressure reactor is designed to perform low to moderate positive pressure reactions, synthesis, and catalysis. Flask has a #25 center neck, (3) #15 side necks, and (1) #7 side neck. Flask bottom outlet is 0-8mm 28/15 ball joint. Jacket inlet/outlet has a 28/15 o-ring ball joint. Rated 45 PSI at 100 degrees C. Reactor system includes addition funnel, condenser, manifold, and stirring assemblies.
Round bottom bioreactor vessel is manufactured of type 1 class a Borosilicate glass. Graduations are 500ml to 2500ml every 500ml. Vessel dimensions are 145mm od x 267mm oah. A full range of accessories are available for this vessel. Total volume: 3.6l. Wo
2000mL, two-piece pressure reactor system, complete with glass body, 100mm head with (1) #7 and (5) #15 necks, addition funnel, condenser, manifold with gauge and rupture disc, stirring and temperature control assemblies
30L Process Reactor, Complete, Air Motor, 79.0" OAH with Motor, 20.9" Clearance Below Valve.Features:• Motor Mount Arm Can Unlock And Swing Out Giving Greater Access To Reactor• Smaller Footprint Support Frame With Oversized Rugged S.S. Uprights And Heavy Duty PTFE Coated Aluminum Fittings• Electric And XP Motor Has Separate Controller With Digital Display• Reactor Support Plate Holds Reactor Securely And Allows Easy Installation/Removal Of Reactor By One Person• Lower Safety Ring And Lower Mantle Base• Heavy Duty Lockable Casters • Electric Or Air Motor Optional XP Motor Available• Open Frame Design Provides Excellent Accessibility• 7-Neck Lid With Large Powder Addition Port• Ridge Clamp Accepts 1/2” Rod And Adds Additional Support For Large Glassware• #304 S.S. Cooling Coil PTFE Coated • Digital Temperature Controller• Zero Dead Space Detachable Drain Valve Has Knob With Laser Etched Directional Arrows For Open And Close
Features: Working Volume 1-35Ml *Easy To Start Small Suspension Cell Cultures From Frozen *Ergonomic Use Of Bacterial And Yeast Cultures -- Static And Shaking Conical Bottom 0.2um Filter Membrane *Sterile Gas Exchange 5 Openings *(A, B, C, D, E) Of Different Size Above The Gas Permeable, Sterile Ptfe Filter Of The Screw Cap *Openings Can Be Sealed To Adjust Gas Exchange According To Need Fits In Standard 15Ml Centrifuge Rotors *Saves Costs Of Culture Start-Ups In Erlenmyer Flasks And Then Transfer To Conical Tubes *Culture And Spin In A Single Tube. 60/case
NC2312811 3/4-2IN OD PVDF LG CLAMP 25PK
Large Clamp, PVDF, Tubing Range 3/4-2in OD
3/4 ph/do probe holder bioreactor. 316 l stainless steel Ra 32 finish or better
Material: 316l SST with electropolish finish, ra 32 or better, inside & outDimensions: harvest tube (3/8" od) - 1" above slug, 17" insertion lengthAddition tube (1/4"od) - 1" above slug, 2 21/64" belowVent tube (1/4" od) - 1" above slug, .975" belowSu
The SST 45mm compression & hose barb cap assembly is designed with a 1/4" id compression fitting for insertion of tube accessories and 1/4" od hose barb for silicone tubing attachment. The compression fitting is supplied with a nylon ferrule for easy adju
Size: 1lSeam welded w/ electropolish finish3-port w/ siphon, fill & vent tubesIncludes: 45mm pp cap & silicone gasket
Weight platforms allow the user to monitor and/or control the weight of the reaction vessels. The platforms contain 4 load cells and plugs into the rear of the CellTrol II units having weight capability.
Compression pipe fitting assembly for 15 liter Bioreactor vessel. For attachment on metric style head plate.
316l stainless steel sparger assembly with stainless steel frit for 3 liter bioreactor system. English threads Material: 316l SST with electropolish finish ra 32 or better tubing specifications: .250" od x .152" idOverall length: 10 43/64" Ins