Test
O-Ring and Lens for Azzota Glass Polarimeter Tubes
Polarimeter tube, Bubble model, High Clear Borosilicate Glass, Diameter: 14mm, Pathlength: 50mm or 100mm or 200mm
NO. 45 END PLATE - GLASS (15.5MM) pack/12
NC2186683 TEMPTROL 100MM CELL-CERAMIC
POLARIMETER TUBE 200MM
Sodium Lamp for Auto Polarimeters and Disc Polarimeters
Polarimeter tube, cap model, High Clear Borosilicate Glass, Diameter: 14mm, Pathlength: 50mm or 100mm or 200mm
WASHER, SILICONE 40A DUROMETER pack/12
This item has a minimum qty of 5 per supplier requirements.
15.5 mm Glass Window for 50 - 200 mm polarimeter sample cells
POLARIMETER TUBE, Cup shape, 100MM
50-209-7182 6TB DESKTOP HARD DRIVE
NC2938337 POLARIMETER TUBE SS 100MM
Round filter with a thickness of 3 mm and a diameter of 13 mm that blocks X-rays up to 700 nm with a transmission (%) greater than 85% at 589 nm.
POLARIMETER MICROTUBE, 50MM, 1ML, tube Diameter: 14mm
Cartridge systems make changing gas filters quick and easy. A base plate allows cartridges to be exchanged without introducing oxygen. Spring-loaded check valves seal when a filter is removed and open only when a new filter has been locked in place. There is no longer a need for loosening and tightening fittings every time a trap is changed and your system will not become contaminated during the process. Carrier Gas Purity Carrier gas should contain less than 1ppm of oxygen, moisture, or other trace contaminants, to prevent column degradation, increase column lifetime, and decrease stationary phase bleed. The expense of using high-purity gases in combination with carrier gas line purifiers will be offset by longer column lifetime and less GC maintenance. Contaminants cause ghost peaks to appear during temperature programming and degrade the validity of analytical data. Make-up gas also should be contaminant-free, or baseline fluctuations and excessive detector noise can occur; detect