Viscometer Accessories
Viscometer Accessories
Fisherbrand™ Viscometer Holders
For use with Cannon-Manning Vacuum and Asphalt Institute Vacuum viscometers.
Fisherbrand™ Viscometer Holders
For use with both calibrated and uncalibrated Cannon™-Fenske Routine, Cannon-Fenske opaque, Cannon-Manning semimicro and Cannon-Manning vacuum viscometers.
Cargille Laboratories Viscosity Tubes
For measuring viscosity
IKA™ ROTAVISC T-Spindle Set, T-SP-SET
The ROTAVISC T-Spindle Set is particularly suitable for the measurement of non-flowing samples, such as creams, pastes or gelatin and is intended for use with IKA ROTAVISC in combination with IKA HELISTAND.
IKA™ ELVAS-1 Adapter Set
Extremely low viscosity adapter spindle set includes a double jacket to quickly heat up or cool down the sample, as well as a coaxial cylinder system for the analysis of the sample at a specific shear rate and shear stress.
IKA™ SAS-1 Adapter Set
Spiral adapter to measure the viscosity of very sticky and other viscous samples.
Koehler™ Instrument Cannon™/E-Ubbelohde Semi-Micro Viscometer Holder
For use with Cannon/E-Ubbelohde Semi-Micro Viscometers.
IKA™ VOLS-1 Adapter Set
Adapter to measure the viscosity of especially valuable and expensive samples.
IKA™ DINS-1 Adapter Set
Adapter to comply with DIN-53019 standard.
IKA™ VAN-1 Spindle Set
Vane spindle set allows the viscosity measurement of suspensions.
Brookfield Engineer Labs 1 INCH LONG EXTENSION
This item has a minimum qty of 3 per supplier requirements.
Brookfield Engineer Labs Spindle, LV-1 (61) 15-20K, F/ Brookfield Viscometers/Rheometers
All standard LV torque Brookfield Viscometers/Rheometers are supplied with a standard spindle set (LV-1 through LV-4) constructed of #302 stainless steel. Additional spindle options are available in #316 stainless steel or Teflon coating for increased corrosion resistance. An optional spindle rack makes a convenient storage "bench" and allows easy and quick access to all spindles.
Brookfield Engineer Labs Brookfield Ametek Spindle RVHV #4 RVHV-4
All standard RV, HA or HB torque Brookfield Ametek Viscometers/Rheometers are supplied with a standard spindle set (RV-2 through RV-7) constructed of #302 stainless steel. Additional spindle options are available in #316 stainless steel or Teflon coating for increased corrosion resistance.
Brookfield Engineer Labs BROOKFIELD T BAR SPINDLE SET
T-bar Spindle Set with six T-bar spindles and Chuck/Closer/Weight Assembly
Brookfield Engineer Labs B Mineral Oil Fluids, B2000
Brookfield Viscosity Standards are accurate to ±1% of the stated viscosity and are certified by methods traceable to the United States National Institute of Standards and Technology (NIST). The selection of one or two fluids will normally provide sufficient measurement points to verify the calibration of your instrument. All fluids are supplied in 1/2 liter (1 pint) containers complete with a certificate of calibration.
Brookfield Engineer Labs VISC. STANDARD - 21000CP
21000 CPS General Purpose Mineral Oil Viscosity Standard
Brookfield Engineer Labs VISCOCITY STANDARD - 1060CP
1060 CPS General Purpose Mineral Oil Viscosity Standard
Brookfield Engineer Labs SPINDLE COUPLING YU-20C
This item has a minimum order quantity of 2 per supplier requirements. SPINDLE COUPLING YU-20C
Brookfield Engineer Labs SSA COUPLING NUT NOS23
This item has a minimum qty of 2 per supplier requirements.
Coupling Nut for Small Sample Adapter accessory and Thermosel accessory
Brookfield Engineer Labs EXTENSION LINK (THERMOSEL)
This item has a minimum qty of 3 per supplier requirements.
EXTENSION LINK (THERMOSEL)