Laboratory Desks and Workstations

Laboratory Desks and Workstations

Desks and workstations designed for use in laboratories and/or clean rooms. Products may include ventilation, water source, gas fixtures, storage, chemical resistant top, and lifting mechanisms.
Material 
  • (191)
  • (69)
  • (14)
  • (9)
  • (4)
  • (2)
  • (1)
  • (1)
Type 
  • (14)
  • (11)
  • (9)
  • (8)
  • (8)
  • (8)
  • (8)
  • (5)
  • (4)
  • (4)
  • (4)
  • (3)
  • (2)
  • (2)
  • (2)
  • (2)
  • (1)
  • (1)
  • (1)
  • (1)
  • (1)
  • (1)
  • (1)
  • (1)
  • (1)
Color 
  • (10)
  • (4)
  • (4)
  • (1)
  • (1)

Filtered Search Results

Products from some of our suppliers do not display in filtered search results. Please clear all filters to see these products.

Filter By

Filter By

No results found within this category. Try removing some selected filters and try again.

category

brands

  • (80)
  • (1)
  • (2)
  • (1)
  • (18)
  • (4)
  • (2)
  • (4)
  • (1)
  • (191)
  • (1)

special interests

  • (84)
  • (7)

Material

  • (191)
  • (69)
  • (14)
  • (9)
  • (4)
  • (2)
  • (1)
  • (1)

Type

  • (14)
  • (11)
  • (9)
  • (8)
  • (8)
  • (8)
  • (8)
  • (5)
  • (4)
  • (4)
  • (4)
  • (3)
  • (2)
  • (2)
  • (2)
  • (2)
  • (1)
  • (1)
  • (1)
  • (1)
  • (1)
  • (1)
  • (1)
  • (1)
  • (1)

Color

  • (10)
  • (4)
  • (4)
  • (1)
  • (1)
1 – 30 of 80 results
1

Fisherbrand™ Mobile Cabinet Work Surface

Mobile cabinet work surface is a phenolic work surface to be used with steel mobile cabinets.

Height (Metric) 1.9 cm
Depth (English) 23.5 in.
Depth (Metric) 58.4 cm
Color Black
Material Phenolic Resin
Height (English) 0.75 in.
2

Labconco™ Protector™ Workstation
SDP

Ensure extra protection in special purpose labs. The Labconco Protector™ Workstation is specifically designed for use by pathologists and histotechnologists.

Flow Rate 150 to 250 cfm
Type Workstation (base stand and work surface sold separately)
Depth (English) 29 in.
Width (English) 48 in.
Certifications ANSI Z9.5, CAN/CSA C22.2, ASHRAE 110, SEFA 1, UL
Depth (Metric) 74 cm
Voltage 115 V
Amperage 10 A
Material Epoxy Coated Aluminum and Steel
Width (Metric) 122 cm
Hertz 60 Hz
Height (English) 25.7 in.
3

Treston™ Single Upright

Attaches directly to Treston table frames for adding accessories, such as shelves and monitor arms, above the workstation.

Load Bearing Capacity (English) 110 lb.
Description Single upright
Warranty 5 years
Depth (English) 2.36 in.
Width (English) 1.18 in.
With Tilt No
Footrest No
Quantity 1 Ea.
Material Steel
For Use With (Application) Laboratories
Width (Metric) 30 mm
Adjustable Along upright in 1 in. increments
With Backrest No
With Armrest No
Includes Attachment hardware
Load Bearing Capacity (Metric) 50 kg
With Lumbar Support No
With Casters No
For Use With (Equipment) Treston Workstations
Depth (Metric) 60 mm
Back Style Open
Increments 1 in.
Autoclavable Not Autoclavable
Surface Coating Epoxy powder coat
Finish Epoxy powder coat
4

Treston™ Electric Desk with Phenolic Top

The Treston Electric Desk comes with quick, silent, and wide height adjustment allowing for a tailored experience for each individual. This ergonomic sit-stand desk perfectly suits light-duty laboratories and offices. Add Treston upright accessories and more for a flexible and ergonomic workstation.

Load Bearing Capacity (English) 440 lb.
Warranty 2 Years
Depth (English) 31.5 in.
Certifications CE
Color Gray
No. of Drawers None
Material Steel
Adjustable (Height) 24.8 in. to 50 in. (25.2 in. Range Total)
For Use With (Application) Light-Duty Lab/Assembly, Office
Includes Frame, Top, and Hardware
Load Bearing Capacity (Metric) 200 kg
Type Bench
No. of Shelves None
Voltage 100/240 V
Amperage 9 A
Weight (English) 109 lb.
Hertz 50/60 Hz
Finish Powder-Coated
Weight (Metric) 49 kg
5

Treston™ Concept Manual Frame Single Bay Uprights and One Shelf

Treston Concept manual tables are height adjustable with an allen key. Add casters and accessories for a complete, ergonomic workstation.

Description Concept manual frame
Height (English) Adjustment With Caster 30.4 to 47.3 in.
With Tilt No
Footrest No
Certifications ISO Class 7 cleanroom
For Use With (Application) Laboratories
With Armrest No
Includes Frame, top, 2 slotted uprights, 2 corner brackets, 1 horizontal tube, 1 shelf and attachment hardware
With Lumbar Support No
No. of Shelves 1
With Casters No
For Use With (Equipment) Any Laboratory Equipment
Finish Epoxy powder coat
Height (English) 26.4 to 43.3 in.
Load Bearing Capacity (English) 1100 lb.
Height (Metric) 670 to 1100 mm
Frame Type C-leg manual
Warranty 5 years
Depth (English) 30 in.
Foot Type Glide
Quantity 1 Ea.
Material Steel
Lift Type Allen key
Adjustable (Height) 26.38 to 43.31 in.
Adjustable Adjustable with allen key
With Backrest No
Load Bearing Capacity (Metric) 500 kg
Depth (Metric) 762 mm
Back Style Open
Model Concept
Increments Stepless
Height (Metric) Adjustment With Caster 772 to 1201 mm
Autoclavable Not Autoclavable
Surface Coating Epoxy powder coat
6

Treston™ Concept Motor Frame Single Bay Uprights

Treston Concept motor tables are height adjustable with a linear actuator. Switch includes 3 programmable buttons. Add casters and accessories for a complete, ergonomic workstation

Description Concept hand crank frame
Plug Type NEMA 1-15 P
Height (English) Adjustment With Caster 31.6 to 47.3 in.
With Tilt No
Footrest No
Certifications ISO Class 7 cleanroom
For Use With (Application) Laboratories
With Armrest No
Includes Frame, top, 2 slotted uprights, 2 corner brackets, 1 horizontal tube and attachment hardware
With Lumbar Support No
With Casters No
For Use With (Equipment) Any Laboratory Equipment
Voltage 120 V
Amperage 9 A
Hertz 60 Hz
Finish Epoxy powder coat
Height (English) 27.6 to 43.3 in.
Load Bearing Capacity (English) 880 lb.
Height (Metric) 700 to 1100 mm
Frame Type C-leg motorized
Electrical Requirements 15 amp outlet
Warranty 5 years for steel, 2 years for motor
Depth (English) 30 in.
Foot Type Glide
Quantity 1 Ea.
Material Steel
Lift Type Linear actuator
Adjustable (Height) 27.56 to 43.31 in.
Adjustable Adjustable with motor
With Backrest No
Load Bearing Capacity (Metric) 400 kg
Depth (Metric) 762 mm
Back Style Open
Model Concept
Increments Stepless
Height (Metric) Adjustment With Caster 803 to 1201 mm
Autoclavable Not Autoclavable
Surface Coating Epoxy powder coat
7

Treston™ Concept Hand Crank Frame Single Bay Uprights and Two Shelves

Treston Concept hand crank tables are height adjustable with a crank handle. Add casters and accessories for a complete, ergonomic workstation

Description Concept hand crank frame
Height (English) Adjustment With Caster 30.6 to 44.4 in.
With Tilt No
Footrest No
Certifications ISO Class 7 cleanroom
For Use With (Application) Laboratories
With Armrest No
Includes Frame, top, 2 slotted uprights, 2 corner brackets, 1 horizontal tube, 2 shelves and attachment hardware
With Lumbar Support No
No. of Shelves 2
With Casters No
For Use With (Equipment) Any Laboratory Equipment
Finish Epoxy powder coat
Height (English) 26.6 to 40.4 in.
Load Bearing Capacity (English) 440 lb.
Height (Metric) 675 to 1025 mm
Frame Type C-leg hand crank
Warranty 5 years
Depth (English) 36 in.
Foot Type Glide
Quantity 1 Ea.
Material Steel
Lift Type Hand crank
Adjustable (Height) 26.57 to 40.35 in.
Adjustable Adjustable with hand crank
With Backrest No
Load Bearing Capacity (Metric) 200 kg
Depth (Metric) 914 mm
Back Style Open
Model Concept
Increments Stepless
Height (Metric) Adjustment With Caster 777 to 1128 mm
Autoclavable Not Autoclavable
Surface Coating Epoxy powder coat
8

Treston™ Cornerstone Frame

Treston Cornerstone tables are height adjustable, heavy-duty 4-leg tables designed to support loads up to 2000 lbs. Add casters and accessories for a fully flexible, ergonomic workstation.

Description Concept hand crank frame
Height (English) Adjustment With Caster 31.6 to 44.6 in.
With Tilt No
Footrest No
For Use With (Application) Laboratories
With Armrest No
Includes Frame, top, 2 slotted uprights, 2 corner brackets, 1 horizontal tube, 1 shelf and attachment hardware
With Lumbar Support No
No. of Shelves 1
With Casters No
For Use With (Equipment) Any Laboratory Equipment
Finish Epoxy powder coat
Height (English) 27.6 to 40.6 in.
Load Bearing Capacity (English) 2000 lb.
Height (Metric) 700 to 1030 mm
Frame Type 4-leg
Warranty 5 years
Depth (English) 30 in.
Foot Type Glide
Quantity 1 Ea.
Material Steel
Lift Type Allen key
Adjustable (Height) 27.56 to 40.55 in.
Adjustable Adjustable with allen key
With Backrest No
Load Bearing Capacity (Metric) 907 kg
Depth (Metric) 762 mm
Back Style Open
Model Cornerstone
Increments 1 in.
Height (Metric) Adjustment With Caster 803 to 1133 mm
Autoclavable Not Autoclavable
Surface Coating Epoxy powder coat
9

Treston™ Cornerstone Frame

Treston Cornerstone tables are height adjustable, heavy-duty 4-leg tables designed to support loads up to 2000 lbs. Add casters and accessories for a fully flexible, ergonomic workstation.

Description Concept hand crank frame
Height (English) Adjustment With Caster 31.6 to 44.6 in.
Footrest No
Includes Frame, top, 2 slotted uprights, 2 corner brackets, 1 horizontal tube and attachment hardware
For Use With (Equipment) Any Laboratory Equipment
Finish Epoxy powder coat
Height (English) 27.6 to 40.6 in.
Load Bearing Capacity (English) 2000 lb.
Height (Metric) 700 to 1030 mm
Frame Type 4-leg
Warranty 5 years
Depth (English) 30 in.
Foot Type Glide
Quantity 1 Ea.
Material Steel
Lift Type Allen key
Adjustable (Height) 27.56 to 40.55 in.
Adjustable Adjustable with allen key
Load Bearing Capacity (Metric) 907 kg
Depth (Metric) 762 mm
Back Style Open
Model Cornerstone
Increments 1 in.
Height (Metric) Adjustment With Caster 803 to 1133 mm
Autoclavable Not Autoclavable
Surface Coating Epoxy powder coat
10

Treston™ Concept Manual Frame Single Bay Uprights and One Shelf

Treston Concept manual tables are height adjustable with an allen key. Add casters and accessories for a complete, ergonomic workstation.

Description Concept manual frame
Height (English) Adjustment With Caster 30.4 to 47.3 in.
With Tilt No
Footrest No
Certifications ISO Class 7 cleanroom
For Use With (Application) Laboratories
With Armrest No
Includes Frame, top, 2 slotted uprights, 2 corner brackets, 1 horizontal tube, 1 shelf and attachment hardware
With Lumbar Support No
No. of Shelves 1
With Casters No
For Use With (Equipment) Any Laboratory Equipment
Finish Epoxy powder coat
Height (English) 26.4 to 43.3 in.
Load Bearing Capacity (English) 1100 lb.
Height (Metric) 670 to 1100 mm
Frame Type C-leg manual
Warranty 5 years
Depth (English) 36 in.
Foot Type Glide
Quantity 1 Ea.
Material Steel
Lift Type Allen key
Adjustable (Height) 26.38 to 43.31 in.
Adjustable Adjustable with allen key
With Backrest No
Load Bearing Capacity (Metric) 500 kg
Depth (Metric) 914 mm
Back Style Open
Model Concept
Increments Stepless
Height (Metric) Adjustment With Caster 772 to 1201 mm
Autoclavable Not Autoclavable
Surface Coating Epoxy powder coat
11

Treston™ Concept Manual Frame with Single Bay Uprights

Treston Concept manual tables are height adjustable with an allen key. Add casters and accessories for a complete, ergonomic workstation

Description Concept manual frame
Height (English) Adjustment With Caster 30.4 to 47.3 in.
With Tilt No
Footrest No
Certifications ISO Class 7 cleanroom
For Use With (Application) Laboratories
With Armrest No
Includes Frame, top, 2 slotted uprights, 2 corner brackets, 1 horizontal tube and attachment hardware
With Lumbar Support No
With Casters No
For Use With (Equipment) Any Laboratory Equipment
Finish Epoxy powder coat
Height (English) 26.4 to 43.3 in.
Load Bearing Capacity (English) 1100 lb.
Height (Metric) 670 to 1100 mm
Frame Type C-leg manual
Warranty 5 years
Depth (English) 30 in.
Foot Type Glide
Quantity 1 Ea.
Material Steel
Lift Type Allen key
Adjustable (Height) 26.38 to 43.31 in.
Adjustable Adjustable with allen key
With Backrest No
Load Bearing Capacity (Metric) 500 kg
Depth (Metric) 762 mm
Back Style Open
Model Concept
Increments Stepless
Height (Metric) Adjustment With Caster 772 to 1201 mm
Autoclavable Not Autoclavable
Surface Coating Epoxy powder coat
12

Treston™ Concept Hand Crank Frame Single Bay Uprights and One Shelf

Treston Concept hand crank tables are height adjustable with a crank handle. Add casters and accessories for a complete, ergonomic workstation

Description Concept hand crank frame
Height (English) Adjustment With Caster 30.6 to 44.4 in.
With Tilt No
Footrest No
Certifications ISO Class 7 cleanroom
For Use With (Application) Laboratories
With Armrest No
Includes Frame, top, 2 slotted uprights, 2 corner brackets, 1 horizontal tube, 1 shelf and attachment hardware
With Lumbar Support No
No. of Shelves 1
With Casters No
For Use With (Equipment) Any Laboratory Equipment
Finish Epoxy powder coat
Height (English) 26.6 to 40.4 in.
Load Bearing Capacity (English) 440 lb.
Height (Metric) 675 to 1025 mm
Frame Type C-leg hand crank
Warranty 5 years
Depth (English) 36 in.
Foot Type Glide
Quantity 1 Ea.
Material Steel
Lift Type Hand crank
Adjustable (Height) 26.57 to 40.35 in.
Adjustable Adjustable with hand crank
With Backrest No
Load Bearing Capacity (Metric) 200 kg
Depth (Metric) 914 mm
Back Style Open
Model Concept
Increments Stepless
Height (Metric) Adjustment With Caster 777 to 1128 mm
Autoclavable Not Autoclavable
Surface Coating Epoxy powder coat
13

Treston™ Concept Motor Frame Single Bay Uprights and Two Shelves

Treston Concept motor tables are height adjustable with a linear actuator. Switch includes 3 programmable buttons. Add casters and accessories for a complete, ergonomic workstation.

Description Concept hand crank frame
Plug Type NEMA 1-15 P
Height (English) Adjustment With Caster 31.6 to 47.3 in.
With Tilt No
Footrest No
Certifications ISO Class 7 cleanroom
For Use With (Application) Laboratories
With Armrest No
Includes Frame, top, 2 slotted uprights, 2 corner brackets, 1 horizontal tube, 2 shelves and attachment hardware
With Lumbar Support No
No. of Shelves 2
With Casters No
For Use With (Equipment) Any Laboratory Equipment
Voltage 120 V
Amperage 9 A
Hertz 60 Hz
Finish Epoxy powder coat
Height (English) 27.6 to 43.3 in.
Load Bearing Capacity (English) 880 lb.
Height (Metric) 700 to 1100 mm
Frame Type C-leg motorized
Electrical Requirements 15 amp outlet
Warranty 5 years for steel, 2 years for motor
Depth (English) 30 in.
Foot Type Glide
Quantity 1 Ea.
Material Steel
Lift Type Linear actuator
Adjustable (Height) 27.56 to 43.31 in.
Adjustable Adjustable with motor
With Backrest No
Load Bearing Capacity (Metric) 400 kg
Depth (Metric) 762 mm
Back Style Open
Model Concept
Increments Stepless
Height (Metric) Adjustment With Caster 803 to 1201 mm
Autoclavable Not Autoclavable
Surface Coating Epoxy powder coat
14

Treston™ Concept Motor Frame Single Bay Uprights and One Shelf

Treston Concept motor tables are height adjustable with a linear actuator. Switch includes 3 programmable buttons. Add casters and accessories for a complete, ergonomic workstation.

Description Concept hand crank frame
Plug Type NEMA 1-15 P
Height (English) Adjustment With Caster 31.6 to 47.3 in.
With Tilt No
Footrest No
Certifications ISO Class 7 cleanroom
For Use With (Application) Laboratories
With Armrest No
Includes Frame, top, 2 slotted uprights, 2 corner brackets, 1 horizontal tube, 1 shelf and attachment hardware
With Lumbar Support No
No. of Shelves 1
With Casters No
For Use With (Equipment) Any Laboratory Equipment
Voltage 120 V
Amperage 9 A
Hertz 60 Hz
Finish Epoxy powder coat
Height (English) 27.6 to 43.3 in.
Load Bearing Capacity (English) 880 lb.
Height (Metric) 700 to 1100 mm
Frame Type C-leg motorized
Electrical Requirements 15 amp outlet
Warranty 5 years for steel, 2 years for motor
Depth (English) 36 in.
Foot Type Glide
Quantity 1 Ea.
Material Steel
Lift Type Linear actuator
Adjustable (Height) 27.56 to 43.31 in.
Adjustable Adjustable with motor
With Backrest No
Load Bearing Capacity (Metric) 400 kg
Depth (Metric) 914 mm
Back Style Open
Model Concept
Increments Stepless
Height (Metric) Adjustment With Caster 803 to 1201 mm
Autoclavable Not Autoclavable
Surface Coating Epoxy powder coat
15

Treston™ Cornerstone Frame with Two Shelves

Treston Cornerstone tables are height adjustable, heavy-duty 4-leg tables designed to support loads up to 2000 lbs. Add casters and accessories for a fully flexible, ergonomic workstation.

Description Concept hand crank frame
Height (English) Adjustment With Caster 31.6 to 44.6 in.
With Tilt No
Footrest No
For Use With (Application) Laboratories
With Armrest No
Includes Frame, top, 2 slotted uprights, 2 corner brackets, 1 horizontal tube, 2 shelves and attachment hardware
With Lumbar Support No
No. of Shelves 2
With Casters No
For Use With (Equipment) Any Laboratory Equipment
Finish Epoxy powder coat
Height (English) 27.6 to 40.6 in.
Load Bearing Capacity (English) 2000 lb.
Height (Metric) 700 to 1030 mm
Frame Type 4-leg
Warranty 5 years
Depth (English) 30 in.
Foot Type Glide
Quantity 1 Ea.
Material Steel
Lift Type Allen key
Adjustable (Height) 27.56 to 40.55 in.
Adjustable Adjustable with allen key
With Backrest No
Load Bearing Capacity (Metric) 907 kg
Depth (Metric) 762 mm
Back Style Open
Model Cornerstone
Increments 1 in.
Height (Metric) Adjustment With Caster 803 to 1133 mm
Autoclavable Not Autoclavable
Surface Coating Epoxy powder coat
16

Treston™ Concept Motor Frame Single Bay Uprights and One Shelf

Treston Concept motor tables are height adjustable with a linear actuator. Switch includes 3 programmable buttons. Add casters and accessories for a complete, ergonomic workstation.

Description Concept hand crank frame
Plug Type NEMA 1-15 P
Height (English) Adjustment With Caster 31.6 to 47.3 in.
With Tilt No
Footrest No
Certifications ISO Class 7 cleanroom
For Use With (Application) Laboratories
With Armrest No
Includes Frame, top, 2 slotted uprights, 2 corner brackets, 1 horizontal tube, 1 shelf and attachment hardware
With Lumbar Support No
No. of Shelves 1
With Casters No
For Use With (Equipment) Any Laboratory Equipment
Voltage 120 V
Amperage 9 A
Hertz 60 Hz
Finish Epoxy powder coat
Height (English) 27.6 to 43.3 in.
Load Bearing Capacity (English) 880 lb.
Height (Metric) 700 to 1100 mm
Frame Type C-leg motorized
Electrical Requirements 15 amp outlet
Warranty 5 years for steel, 2 years for motor
Depth (English) 30 in.
Foot Type Glide
Quantity 1 Ea.
Material Steel
Lift Type Linear actuator
Adjustable (Height) 27.56 to 43.31 in.
Adjustable Adjustable with motor
With Backrest No
Load Bearing Capacity (Metric) 400 kg
Depth (Metric) 762 mm
Back Style Open
Model Concept
Increments Stepless
Height (Metric) Adjustment With Caster 803 to 1201 mm
Autoclavable Not Autoclavable
Surface Coating Epoxy powder coat
17

Treston™ Slotted Upright Module Double Bay

Double bay slotted uprights for attachment to Treston table frames. Double bay upright modules allow for 2 columns of accessories, compared to single bay modules.

Load Bearing Capacity (English) 220 lb.
Warranty 5 years
Depth (English) 2.36 in.
With Tilt No
Footrest No
Quantity 1 Ea.
Material Steel
For Use With (Application) Laboratories
Adjustable Along upright in 1 in. increments
With Backrest No
With Armrest No
Includes 3 slotted uprights, 2 corner brackets, 1 straight bracket, 2 horizontal tubes and attachment hardware
Load Bearing Capacity (Metric) 100 kg
With Lumbar Support No
With Casters No
For Use With (Equipment) Treston Workstations
Depth (Metric) 60 mm
Back Style Open
Increments 1 in.
Autoclavable Not Autoclavable
Surface Coating Epoxy powder coat
Finish Epoxy powder coat
18

Treston™ Upright Tube Pair for TED

Treston upright tubes enable the Treston Electric Desk to be accessorized in many ways, for a flexible and ergonomic workstation.

Includes Mounting Hardware
Warranty 5 Years
Width (English) 2.76 in.
For Use With (Equipment) TED Electric Desk
Color Gray
Weight (English) 8 lb.
Material Steel
For Use With (Application) Light-Duty Lab/Assembly, Office
Width (Metric) 70 mm
Finish Powder-Coated
Weight (Metric) 3.6 kg
19

Treston™ Single Bay Uprights

For attaching to Concept or Cornerstone table frames. These slotted uprights allow for accessories, such as shelves and power, to be mounted above the workspace. Module includes 2 slotted uprights and 2 corner brackets.

Load Bearing Capacity (English) 220 lb.
Height (Metric) 1582 mm
Warranty 5 years
Depth (English) 2.36 in.
Width (English) 1.18 in.
Length (Metric) 1582 mm
Footrest No
Length (English) 62.28 in.
Quantity 1 Ea.
Material Steel
For Use With (Application) Laboratories
Width (Metric) 30 mm
Includes 2 slotted uprights, 2 corner brackets, 1 horizontal rail, and attachment hardware
Load Bearing Capacity (Metric) 50 kg
For Use With (Equipment) Treston Workstations
Depth (Metric) 60 mm
Back Style Open
Increments 1 in.
Autoclavable Not Autoclavable
Surface Coating Epoxy powder coat
Finish Epoxy powder coat
Height (English) 62.3 in.
20

Treston™ Corner Bracket Pair for Uprights

Corner bracket pair for Treston slotted uprights. Used for adding horizontal tube to uprights for support in single and double bay systems.

21

Treston™ Horizontal Tube for Uprights

Use with slotted upright tubes, and corner/T straight brackets. Horizontal tubes connect slotted uprights for additional support.

Warranty 5 years
Depth (English) 2.36 in.
With Tilt No
Footrest No
Quantity 1 Ea.
Material Steel
For Use With (Application) Laboratories
With Backrest No
With Armrest No
Includes Horizontal tube
With Lumbar Support No
With Casters No
For Use With (Equipment) Treston Workstations
Depth (Metric) 60 mm
Back Style Open
Autoclavable Not Autoclavable
Surface Coating Epoxy powder coat
Finish Epoxy powder coat
22

Treston™ Straight Bracket for Double Bay Uprights

Straight bracket for double bay uprights. Used for adding horizontal tubes to uprights for support in double bay systems.

23

Treston™ Concept Manual Frame Single Bay Uprights and Two Shelves

Treston Concept manual tables are height adjustable with an allen key. Add casters and accessories for a complete, ergonomic workstation.

Description Concept manual frame
Height (English) Adjustment With Caster 30.4 to 47.3 in.
With Tilt No
Footrest No
Certifications ISO Class 7 cleanroom
For Use With (Application) Laboratories
With Armrest No
Includes Frame, top, 2 slotted uprights, 2 corner brackets, 1 horizontal tube, 2 shelves and attachment hardware
With Lumbar Support No
No. of Shelves 2
With Casters No
For Use With (Equipment) Any Laboratory Equipment
Finish Epoxy powder coat
Height (English) 26.4 to 43.3 in.
Load Bearing Capacity (English) 1100 lb.
Height (Metric) 670 to 1100 mm
Frame Type C-leg manual
Warranty 5 years
Depth (English) 36 in.
Foot Type Glide
Quantity 1 Ea.
Material Steel
Lift Type Allen key
Adjustable (Height) 26.38 to 43.31 in.
Adjustable Adjustable with allen key
With Backrest No
Load Bearing Capacity (Metric) 500 kg
Depth (Metric) 914 mm
Back Style Open
Model Concept
Increments Stepless
Height (Metric) Adjustment With Caster 772 to 1201 mm
Autoclavable Not Autoclavable
Surface Coating Epoxy powder coat
24

Treston™ Concept Hand Crank Frame

Treston Concept hand crank tables are height adjustable with a crank handle. Add casters and accessories for a complete, ergonomic workstation.

Description Concept hand crank frame
Height (English) Adjustment With Caster 30.6 to 44.4 in.
With Tilt No
Footrest No
Certifications ISO Class 7 cleanroom
For Use With (Application) Laboratories
With Armrest No
Includes Frame and top
With Lumbar Support No
With Casters No
For Use With (Equipment) Any Laboratory Equipment
Finish Epoxy powder coat
Height (English) 26.6 to 40.4 in.
Load Bearing Capacity (English) 440 lb.
Height (Metric) 675 to 1025 mm
Frame Type C-leg hand crank
Warranty 5 years
Depth (English) 36 in.
Foot Type Glide
Quantity 1 Ea.
Material Steel
Lift Type Hand crank
Adjustable (Height) 26.57 to 40.35 in.
Adjustable Adjustable with hand crank
With Backrest No
Load Bearing Capacity (Metric) 200 kg
Depth (Metric) 914 mm
Back Style Open
Model Concept
Increments Stepless
Height (Metric) Adjustment With Caster 777 to 1128 mm
Autoclavable Not Autoclavable
Surface Coating Epoxy powder coat
25

Treston™ Concept Manual Frame Single Bay Uprights

Treston Concept manual tables are height adjustable with an allen key. Add casters and accessories for a complete, ergonomic workstation.

Description Concept manual frame
Height (English) Adjustment With Caster 30.4 to 47.3 in.
With Tilt No
Footrest No
Certifications ISO Class 7 cleanroom
For Use With (Application) Laboratories
With Armrest No
Includes Frame, top, 2 slotted uprights, 2 corner brackets, 1 horizontal tube and attachment hardware
With Lumbar Support No
With Casters No
For Use With (Equipment) Any Laboratory Equipment
Finish Epoxy powder coat
Height (English) 26.4 to 43.3 in.
Load Bearing Capacity (English) 1100 lb.
Height (Metric) 670 to 1100 mm
Frame Type C-leg manual
Warranty 5 years
Depth (English) 36 in.
Foot Type Glide
Quantity 1 Ea.
Material Steel
Lift Type Allen key
Adjustable (Height) 26.38 to 43.31 in.
Adjustable Adjustable with allen key
With Backrest No
Load Bearing Capacity (Metric) 500 kg
Depth (Metric) 914 mm
Back Style Open
Model Concept
Increments Stepless
Height (Metric) Adjustment With Caster 772 to 1201 mm
Autoclavable Not Autoclavable
Surface Coating Epoxy powder coat
26

Treston™ Concept Hand Crank Frame Single Bay Uprights and One Shelf

Treston Concept hand crank tables are height adjustable with a crank handle. Add casters and accessories for a complete, ergonomic workstation.

Description Concept hand crank frame
Height (English) Adjustment With Caster 30.6 to 44.4 in.
With Tilt No
Footrest No
Certifications ISO Class 7 cleanroom
For Use With (Application) Laboratories
With Armrest No
Includes Frame, top, 2 slotted uprights, 2 corner brackets, 1 horizontal tube, 1 shelf and attachment hardware
With Lumbar Support No
No. of Shelves 1
With Casters No
For Use With (Equipment) Any Laboratory Equipment
Finish Epoxy powder coat
Height (English) 26.6 to 40.4 in.
Load Bearing Capacity (English) 440 lb.
Height (Metric) 675 to 1025 mm
Frame Type C-leg hand crank
Warranty 5 years
Depth (English) 30 in.
Foot Type Glide
Quantity 1 Ea.
Material Steel
Lift Type Hand crank
Adjustable (Height) 26.57 to 40.35 in.
Adjustable Adjustable with hand crank
With Backrest No
Load Bearing Capacity (Metric) 200 kg
Depth (Metric) 762 mm
Back Style Open
Model Concept
Increments Stepless
Height (Metric) Adjustment With Caster 777 to 1128 mm
Autoclavable Not Autoclavable
Surface Coating Epoxy powder coat
27

Treston™ Concept Motor Frame

Treston Concept motor tables are height adjustable with a linear actuator. Switch includes 3 programmable buttons. Add casters and accessories for a complete, ergonomic workstation.

Description Concept hand crank frame
Plug Type NEMA 1-15 P
Height (English) Adjustment With Caster 31.6 to 47.3 in.
With Tilt No
Footrest No
Certifications ISO Class 7 cleanroom
For Use With (Application) Laboratories
With Armrest No
Includes Frame and top
With Lumbar Support No
With Casters No
For Use With (Equipment) Any Laboratory Equipment
Voltage 120 V
Amperage 9 A
Hertz 60 Hz
Finish Epoxy powder coat
Height (English) 27.6 to 43.3 in.
Load Bearing Capacity (English) 880 lb.
Height (Metric) 700 to 1100 mm
Frame Type C-leg motorized
Electrical Requirements 15 amp outlet
Warranty 5 years for steel, 2 years for motor
Depth (English) 36 in.
Foot Type Glide
Quantity 1 Ea.
Material Steel
Lift Type Linear actuator
Adjustable (Height) 27.56 to 43.31 in.
Adjustable Adjustable with motor
With Backrest No
Load Bearing Capacity (Metric) 400 kg
Depth (Metric) 914 mm
Back Style Open
Model Concept
Increments Stepless
Height (Metric) Adjustment With Caster 803 to 1201 mm
Autoclavable Not Autoclavable
Surface Coating Epoxy powder coat
28

Treston™ Concept Motor Frame

Switch includes 3 programmable buttons. Add casters and accessories for a complete, ergonomic workstation.

Description Concept hand crank frame
Plug Type NEMA 1-15 P
Height (English) Adjustment With Caster 31.6 to 47.3 in.
With Tilt No
Footrest No
Certifications ISO Class 7 cleanroom
For Use With (Application) Laboratories
With Armrest No
Includes Frame and top
With Lumbar Support No
With Casters No
For Use With (Equipment) Any Laboratory Equipment
Voltage 120 V
Amperage 9 A
Hertz 60 Hz
Finish Epoxy powder coat
Height (English) 27.6 to 43.3 in.
Load Bearing Capacity (English) 880 lb.
Height (Metric) 700 to 1100 mm
Frame Type C-leg motorized
Electrical Requirements 15 amp outlet
Warranty 5 years for steel, 2 years for motor
Depth (English) 30 in.
Foot Type Glide
Quantity 1 Ea.
Material Steel
Lift Type Linear actuator
Adjustable (Height) 27.56 to 43.31 in.
Adjustable Adjustable with motor
With Backrest No
Load Bearing Capacity (Metric) 400 kg
Depth (Metric) 762 mm
Back Style Open
Model Concept
Increments Stepless
Height (Metric) Adjustment With Caster 803 to 1201 mm
Autoclavable Not Autoclavable
Surface Coating Epoxy powder coat
29

Treston™ Concept Manual Frame Single Bay Uprights and Two Shelves

Treston Concept manual tables are height adjustable with an allen key. Add casters and accessories for a complete, ergonomic workstation.

Description Concept manual frame
Height (English) Adjustment With Caster 30.4 to 47.3 in.
With Tilt No
Footrest No
Certifications ISO Class 7 cleanroom
For Use With (Application) Laboratories
With Armrest No
Includes Frame, top, 2 slotted uprights, 2 corner brackets, 1 horizontal tube, 2 shelves and attachment hardware
With Lumbar Support No
No. of Shelves 2
With Casters No
For Use With (Equipment) Any Laboratory Equipment
Finish Epoxy powder coat
Height (English) 26.4 to 43.3 in.
Load Bearing Capacity (English) 1100 lb.
Height (Metric) 670 to 1100 mm
Frame Type C-leg manual
Warranty 5 years
Depth (English) 30 in.
Foot Type Glide
Quantity 1 Ea.
Material Steel
Lift Type Allen key
Adjustable (Height) 26.38 to 43.31 in.
Adjustable Adjustable with allen key
With Backrest No
Load Bearing Capacity (Metric) 500 kg
Depth (Metric) 762 mm
Back Style Open
Model Concept
Increments Stepless
Height (Metric) Adjustment With Caster 772 to 1201 mm
Autoclavable Not Autoclavable
Surface Coating Epoxy powder coat
30

Treston™ Concept Hand Crank Frame Single Bay Uprights

Treston Concept hand crank tables are height adjustable with a crank handle. Add casters and accessories for a complete, ergonomic workstation

Description Concept hand crank frame
Height (English) Adjustment With Caster 30.6 to 44.4 in.
With Tilt No
Footrest No
Certifications ISO Class 7 cleanroom
For Use With (Application) Laboratories
With Armrest No
Includes Frame, top, 2 slotted uprights, 2 corner brackets, 1 horizontal tube and attachment hardware
With Lumbar Support No
With Casters No
For Use With (Equipment) Any Laboratory Equipment
Finish Epoxy powder coat
Height (English) 26.6 to 40.4 in.
Load Bearing Capacity (English) 440 lb.
Height (Metric) 675 to 1025 mm
Frame Type C-leg hand crank
Warranty 5 years
Depth (English) 36 in.
Foot Type Glide
Quantity 1 Ea.
Material Steel
Lift Type Hand crank
Adjustable (Height) 26.57 to 40.35 in.
Adjustable Adjustable with hand crank
With Backrest No
Load Bearing Capacity (Metric) 200 kg
Depth (Metric) 914 mm
Back Style Open
Model Concept
Increments Stepless
Height (Metric) Adjustment With Caster 777 to 1128 mm
Autoclavable Not Autoclavable
Surface Coating Epoxy powder coat