Dataloggers and Recorders
Dataloggers and Recorders
Fisherbrand™ Traceable™ Excursion-Trac™ Datalogging Thermometers, 1 Bottle Probe

Monitor temperatures in refrigerators, freezers, water baths, heating blocks and incubators with this datalogging thermometer. Traceable™ Excursion-Trac™ Datalogging Thermometers have a temperature range of -50 to 70°C and resolution of 0.01 and maintain an accuracy of ±0.25°C across the entire temperature range.

Fisherbrand™ TraceableLIVE™ Wi-Fi Datalogging Refrigerator/Freezer Thermometers with Remote Notification

Now with FREE TraceableLIVE subscription plan (for one user)! The simple, efficient, and reliable way to stay connected to critical environments through a smart phone, tablet, or personal computer.
Fisherbrand™ TraceableLIVE™ Ultra-Low Temperature WiFi Datalogging Thermometer with Remote Notification

Now with FREE TraceableLIVE subscription plan (for one user)! A simple, efficient, and reliable way to stay connected to your critical environments with smartphone, tablet or personal computer.
Fisherbrand™ Traceable™ 100-Hr Four-Channel Timer

Fisherbrand™ Traceable™ 100-Hr Four-Channel Timer is a lab workhorse provides 100 hour timing on four channels.
Eisco™ Voltage Sensor

Accurately measures voltage of electronic circuits using two banana plugs, included with sensor.
Vernier™ Power Amplifier


Use the Power Amplifier as a power supply for DC and ACcircuit investigations or to drive devices such as speakers, lamps, and small DC motors.
Vernier™ LabQuest Power Supply


Replacement power supply for the LabQuest, LabQuest 2, and LabQuest Mini.
Vernier™ Salinity Standard


This 35 ppt standard is used to calibrate the Salinity Sensor. (500 mL)
Vernier™ Digital Extension Cable


Most of our sensors have cables that are 1.5 m long. There are times, however, that you may wish to have a longer cable. The Digital Sensor Extension Cable can be used with any Vernier sensor that connects to a digital channel of LabPro, CBL 2, or CBL, such as Motion Detectors and Photogates. Each cable is 2 meters in length.
Vernier™ EasyLink


Inexpensive data collection direct to any TI-Nspire handheld or TI-84 Plus graphing calculator.
Vernier™ Cuvette Rack


A plastic cuvette rack for holding up to 10 cuvettes during experiments.
Vernier™ Oxidation-Reduction Potential Sensor


The Oxidation-Reduction Potential (ORP) Sensor measures the ability of a solution to act as an oxidizing or reducing agent. Use the ORP Sensor to measure the oxidizing ability of chlorine in swimming pools or to determine when the equivalence point has been reached in an oxidation-reduction reaction.
Vernier™ Projectile Stop


The Projectile Stop has one job–to keep the projectiles from the Vernier Projectile Launcher from rolling out of sight. Place the Projectile Stop in the launch line, beyond the landing site, and the projectile will be caught. The Projectile Stop is heavy foam-coated steel that stays where you put it.
Vernier™ Pyranometer


The Pyranometer measures the power of electromagnetic radiation in watts per square meter. It is sensitive to near infrared, visible, and UV radiation, where 90% of solar energy is concentrated.
Eisco™ Temperature Sensor

Used for students to collect valuable thermal data to supplement wide variety of experiments.
Eisco™ Motion Sensor

Allows students to measure distance, velocity, and acceleration of moving objects.
Eisco™ Neulog Carbon Dioxide (CO2) Logger Sensor

Ideal for collecting CO2 levels in the laboratory or in the field for up to 31 days and transmitting data to either your computer or mobile device for analysis with included Windows, IOS, or Android software.
Eisco™ NeuLog™ Panda

The Eisco™ NeuLog™ Panda is a multi-sensor module with 9 built-in sensors. It is ideal for younger scientists and students that wish to seamlessly and easily collect data.
Eisco™ NeuLog Extended Capacity Battery Unit, 2300m mAh

A new extended capacity battery to support NeuLog products that is more powerful than the last. It has a power rating of 2,300 mAh. The battery comes with a micro to USB cable to recharge and can be used to power all NeuLog sensors and devices including the NeuLog Sense bot.
Eisco™ NeuLog SENSE WIFI Wireless Connection Module

The NeuLog Sense Wireless Communication Module allows the SENSE bot to connect to any tablet or smart device without the need for an application. The user connects to the hotspot created by WIFI203 and then runs the device using a browser.
Eisco™ pH Sensor

Allows students to easily measure pH of pure chemicals and dynamic chemical reactions.
Eisco™ Current Sensor

Accurately measures current of electronic circuits using two banana plugs, included with sensor.
Eisco™ NeuLog™ Motion Logger Sensor

Measures the time for an echo return of ultrasonic wave produced by a transducer.
Eisco™ NeuLog™ Sound Logger Sensor

Measures sound pressure in decibels and waveforms.
Eisco™ NeuLog™ Galvanic Skin Response (GSR) Logger Sensor

Measures conductivity of skin.
Eisco™ NeuLog™ pH Logger Sensor

Measures the static pH of common liquids and changing values in titrations.
Eisco™ NeuLog™ USB Connection Module

The USB module is the first in a chain of sensors connected to a USB port of the PC. It provides both power from the PC to the sensors and communication between the PC and the sensors. It operates with OSX, XP, Vista and Windows7. Connects to a PC using a standard USB - mini USB cable (included).
Eisco™ NeuLog™ Force Logger Sensor

Measures the mass-to-weight relationship and push/pull forces and impacts.
Eisco™ NeuLog™ Spirometer Logger Sensor

Measures and calculates lung volume.