Test
For proper sampling of powders, pellets and other friable materials which may become non-homogeneous in bags
Easy-to-use, easy-to-clean, galvanized-steel sampling tube.
NC0760003 DSP PWDR THF ST 1000MM20ML 20P
NC2291005 VISCO THIEF DISPO 1500MM 20/CS
These high pressure pans and covers contain a sample in a sealed environment throughout an experiment. This ensures that the heat generated from vaporization or a volatile reaction does not interfere with the analyzer's measurements.
The Biocolor Sircol™ Soluble Collagen Assay is a quantitative assay for measurement of both acid-soluble and pepsin-soluble collagens. The colorimetric assay is a dye-binding method using Sircol™ Dye Reagent, which contains Sirius Red dye in picric acid. This kit is suitable for all soluble mammalian collagens, Types I to V. The assay can assess the rate of newly synthesized collagen. New collagen is produced during periods of rapid growth and development. New collagen is also generated during inflammation, wound healing and tumor development. The Sircol™ Assay can monitor collagen produced in situ, or during in-vitro cell culture. It can also measure in-vitro extracellular matrix (ECM) formation. Sensitivity: 1.0 µg. Assay Run Time: 1.5 hours. NOTE: This assay is not suitable for covalent cross-linked collagen.
For use with Autosamplers, these pans are used to prepare sample materials for your DSC Autosampler. These pans and covers are hermetically sealed and may also be used for non-robotic systems.
Glass specimen vial has a high-purity certified 12.7 mm SEM pin stub mounted into the plastic cap. It is ideal for collecting forensic evidence with minimum interference and/or contamination from the sampler. The specimen arrives at the lab ready for carbon coating for SEM/EDX investigation. The Forensic Field Sampler can be securely stored in the glass specimen vial and easily shipped with the cap holding the sampler stub in place. Vial is 25 mm OD x 55 mm high.
Pin length: 6 mm
NC2281877 VIAL SAMPLER PROBE 0.25X15CM
NC1950471 PTFE FILTER 25MM 250/PK
NC2146263 STERIWARE SLOT SAMPLER 620MM
NC1557324 25 AND37MM CALIBRATION ADAPTER
The first essential step in grain grading is to obtain a correct and representative sample. Cars, trucks, wagons or barge loads should be sampled with a double tube probe in five or more places. Also used for plastics, Seedburo probes are made to conform to USDA specifications. They are constructed from extra heavy gauge tubing for durable, time-tested sampling. Open-ended probes without partitions are more convenient to empty and are widely used by the grain elevator operators for obtaining samples from truck loads. After sample is obtained, probe is held upright and sample is dumped from the handle. Grain probes are used by the U.S. Department of Agriculture and by all grain inspectors. There is a separate compartment for each individual opening. Samples from these probes can be emptied on a grain sampling canvas.
The LANCEUltra Mouse CCL2/MCP-1? Detection Kit is designed for detection and quantitation of mouse Monocyte Chemoattractant Protein 1? in cell culture media using a homogeneous TR-FRET (no-wash steps, no separation steps) assay. The 500 point kit contains enough reagents to run 500 wells in 384-well format, using a 20 ¿L reaction volume (15 ¿L of sample). The 5,000 point kit contains enough reagents to run 5,000 wells in 384-well format, using a 20 ¿L reaction volume (15 ¿L of sample). No-wash steps, no separation steps TR-FRET technology Sensitive detection High reproducibility Faster time-to-results Easy automation 96-well, 384-well, and 1536-well formats LANCE and LANCE (Lanthanide chelate excite) Ultra are our TR-FRET (time-resolved fluorescence resonance energy transfer), homogeneous (no wash) technologies. One antibody of interest is labeled with a donor fluorophore (a LANCE Europium chelate) and the second molecule is labeled with an acceptor fluorophore (ULight dye). Upon exc
NC2096626 STERIWARE DISPOSABLE SLOT SAMP