Micro pH Electrodes
Micro pH Electrodes
Thermo Scientific™ Orion™ PerpHecT™ ROSS™ Combination pH Micro Electrode
Measure micro volume samples with this refillable, glass double junction electrode.
Thermo Scientific™ Orion™ 9810BN Micro pH Electrode
Measure pH as low as 0.5μL samples in gels or micro containers with this small-tipped glass combination electrode for pH measurements in micro volume samples.
OHAUS™ Starter Series Electrodes: Micro pH Electrodes
Use in combination with Starter bench and portable meters. OHAUS Starter Series Electrodes: Micro pH Electrodes can be used for testing samples in a tube, where diameter of the electrode should be smaller than the tube.
OHAUS™ Starter Series Electrodes: Micro pH Electrodes
Use in combination with Starter bench and portable meters. OHAUS Starter Series Electrodes: Micro pH Electrodes can be used for testing samples in a tube, where diameter of the electrode should be smaller than the tube.
Cole-Parmer Microelectrode Ph BNC Connector
Take pH measurements in samples as low as 10 uL, even from filter paper and agarose gel.
Metrohm USA MICRO COMBINATION ELECTRODE-16
Routine use on sample changers and in small measuring vessels for acid-base titrations.
METTLER TOLEDO pH Sensor InPro 3250i SG/225
The InPro 3250i SG/225 is a pre-pressurized, liquid filled, low maintenance pH & ORP sensor, combined with a temperature sensor, for in-line measurement in demanding applications. The 225 mm version is optimal for medium installation lengths.
Andwin Scientific Digital Glass Body pH Electrode for General Purpose
The HI11310 is a combination, glass, refillable pH electrode with a built-in temperature sensor. This probe features a 3.5 mm connector designed exclusively to be used with Hanna Instruments edge Tablet Meters.
World Precision Instrument Tungsten Profile C, 76 mm long, 0.145 mm shaft-TM33C05KT
Tungsten, frequently used for microelectrodes, balances performance and cost.
World Precision Instrument Tungsten Concentric Bipolar Microelectrode w/o insulation
- Tungsten
- Package of 3
World Precision Instrument Microelectrode Holder (MEH3S)-MEH3S20
All holders are supplied for standard WPI single capillary tubing of 1.0, 1.2, 1.5 and 2.0 mm outside diameters. Please specify diameter of glass you are using when placing your order.
World Precision Instrument Microelectrode Holder (MPH6R)-MPH6R10
For use with these WPI Products: Piconozzle Kit (5430-XX)
All holders are supplied for standard WPI single capillary tubing of 1.0, 1.2, 1.5 and 2.0 mm outside diameters. Please specify diameter of glass you are using when placing your order.
World Precision Instrument Microelectrode Holder (MEH2R)-MEH2R10
WPI™s microelectrode holder-half-cells couple fluid-filled glass micropipettes to high input impedance amplifiers. A Ag/AgCl pellet (or a silver wire) molded into the holder body provides stable potential. Electrical connection is made via male 2 mm pins or female 2 mm sockets. The pipette may be mounted axially or at right angles to the holder. Pipettes are held with screw-caps or rubber gaskets (without caps). Filling WPI microelectrode holders with electrolytes containing chloride results in stable electrode potential. Suitable electrolytes include KCl, NaCl and CaCl2. Holders are supplied for standard WPI single capillary tubing of 1.0, 1.2, 1.5 and 2.0 mm outside diameters.