Particulate Detection
Particulate Detection
PureAire Monitoring Systems Oxygen Deficiency Monitor

PureAire Monitoring Systems Oxygen Deficiency Monitor with long lasting zirconium sensor
PDM3700 Personal Dust Monitor
Real-time, respirable dust monitor for use in Monitor in real-time with a respirable, personal dust monitor designed specifically for U.S. based mining applications.
MSA™ Model RP Combination Regulators
A fixed flow design provides constant and accurate flow to the gas detector simplifying the test and calibration process and saving calibration gas
MSA™ Model R Calibration Cylinder Holder
Holder for cylinders. Complete with securing straps and sized to house Model R, RP and Econo-Cal Cylinders. Note: Photo at left shows holder with cylinders (not included).
3M™ Ethylene Oxide Monitor 3551+
3M™ Ethylene Oxide Monitor is a cost-effective and convenient way to perform personal air sampling for ethylene oxide. No batteries, hoses or pumps or needed to use the monitor to sample your air.
3M™ Organic Vapor Monitors
Lightweight, self-contained monitors record time-weighted average (TWA) vapor concentrations in factories and industrial, histology, cytology, and clinical labs
Online savings are available
MilliporeSigma™ Supelco™ Escort™ Elf Air Sampling Pump
Internal secondary standard calibrates the pump continuously, maintaining OSHA compliance
VAI SMA™ Microportable Viable Air Sampler
The SMA™ Microportable Viable Air Sampler provides consistent environmental monitoring for viable particles.
MilliporeSigma™ Supelco™ Vacuum Sampling Pumps
Field Sampling Pumps, Used as Accessories for Active and Whole Air Samplers
MilliporeSigma™ Empty Monitor Cassette, 25 mm, Type A
Sample collection and particle analysis
Thermo Scientific™ AerosolSense™ Sampler
Identify the presence of in-air pathogens, including SARS-CoV-2, in indoor air with the AerosolSense Sampler
Cole-Parmer EMD Millipore 1.09191.0001 MAS 100 NT Air Sampler and Microbial Air Monitoring System
Results you can trust in monitoring microbial air quality. Programmable sampling delay up to 59 minutes eliminating remote control devices. Use standard 100mm Petri dishes. The MAS 100 was developed on the Andersen Air Sampler Principle with collection apertures that correspond to Andersen Level 5 for excellent recovery of viable particles as small as 1m. All models include a built-in calibration reminder that can be set between 1 and 12 months, and calibration is made easy with the new digital anemometer 39182-82 (sold separately). Internal software is easily accessed and controlled using single touch yes or no responses and pre-programmed volumes assure reproducible results. Air flow is 100 liters/minute. The unit and lid cover are both made of anodized aluminum and the lids are autoclavable. Power is supplied via NiMH rechargeable batteries. The display is alpha-numeric LCD, 16 digits with real time and date.

MilliporeSigma™ Supelco™ Tube Holders
For use with PAS-500 Micro Air Sampler in Air Monitoring Applications
- 1
- 2