Powered Air Purifying Respirators
Powered Air Purifying Respirators
Powered air purifying respirators (PAPRs) are battery-powered devices that use a blower to provide clean, breathable air to the wearer. Associated products include blowers, breathing tubes, belts, batteries, chargers, filters, air flow indicators, hoods/helmets, or facepieces. The blower unit passes ambient air through a filter before delivering it to the wearer’s headgear or facepiece of choice. Blower units are typically offered as face-mounted, helmet-mounted, or belt-mounted configurations and enable workers to move freely and unrestricted.
According to the National Institute for Occupational Safety and Health (NIOSH), PAPRs are recommended for concentrations of hazardous particulates or gases that are greater than the relevant occupational exposure limit but are less than the immediately dangerous to life or health (IDLH) level and the manufacturer's maximum-use concentration (subject to the respirator having a sufficient assigned protection factor). PAPRs provide an assigned protection factor (APF) between 25 and 1,000 depending on the type, and can be used in a variety of working environments, including healthcare, laboratory, welding, heavy industry, grinding, sanding, manufacturing, painting, and chemical, biological, radiological, and nuclear (CBRN) environments. PAPR systems may consist of the following components:
- Tight-fitting, half or full facepiece, loose-fitting facepiece, hood, or helmet. Loose-fitting PAPRs do not require fit testing and can be worn easily by workers with facial hair. Fit testing is required for tight-fitting facepieces.
- Powered blower unit. NIOSH-approved PAPRs are required to deliver 6 to 15 cubic feet per minute (cfm) of air for loose-fitting hoods and helmets and 4 to 15 cfm of air for tight-fitting masks and facepieces.
- Filter(s) and/or cartridges. Type may vary to protect against particulates, toxic gases or vapors, or a combination of both.
- Battery(ies). May be rechargeable or non-rechargeable.
PAPR systems are complete, ready-to-use kits equipped with a blower, breathing tube, belt, battery, charger, filter cover, air flow indicator, and hood/helmet or facepiece, depending on the environment.
PAPR assemblies are partial systems that include components required to build a full system or to replace worn parts on an existing PAPR system. They are designed to be compatible with hoods or helmets and tight-fitting facepieces. System parts are compatible with components of the same brand and series.
Regulatory compliance details for PAPR devices are available at the individual product level.
Bullard™ EVA PAPR System with Loose-Fitting Hood

Evolutionary Air (EVA) Powered Air-Purifying Respirator (PAPR) uses a battery-powered fan to draw in ambient air through a filter cartridge then delivers filtered air to the hood. System includes PAPR hood system, EVA blower, battery, charger, and breathing tube.
Online savings are available
Bullard™ EVA™ Powered-Air Purifying Respirator Accessory, Lever Lock Kit

For use with Eva™ powered air purifying respirator
Bullard™ Belts and Extender for EVA™ Powered-Air Purifying Respirators

Accessories and replacement parts for Powered-Air purifying respirator
Bullard™ EVA™ Powered-Air Purifying Respirators: Shower Caps

Accessories and replacement parts for Powered-Air purifying respirator
Bullard™ Complete Powered Air Purifying Respirator (PAPR) Kit

NIOSH-approved PAPR provides protection and comfort alternatively to an N95 style mask. Ideal for healthcare professionals.
Bullard™ White Cleanable Carriage Body Straps

White cleanable replacement carriage body straps.
Bullard™ SALUS HC Powered Air Purifying Respirator System

SALUS HC high performing respiratory solution is designed to protect clinicians from exposure to particulates and biological aerosols including viruses and bacteria. Choose from two different sizes and systems that offer one or two HEPA filters and batteries.
Bullard™ SALUS HC Carriage Release Hook, White, Pack of 2

Pack of 2 SALUS HC Carriage Release Hooks.
Bullard™ PA20 / PA30 PAPR Series Accessory, Airflow Indicator

For PA20 and PA30 PAPR Series Powered Air-Purifying Respirators
Bullard™ PA40 Powered Air-Purifying Respirator Accessory, Airflow Indicator

Replacement parts for use with PA40 powered air-purifying respirators
Bullard™ EVA PAPR System, Double Bib Hoods For Head Protection

For use with hard hats, EVA system includes PAPR, EVA blower, battery, charger, breathing tube. Choose from Tychem QC or Tychem SL double bib hoods.
Bullard™ EVA PAPR System with Double Bib Tychem SL Hood (Saranex Coated)

Evolutionary Air (EVA) Powered Air-Purifying Respirator (PAPR) uses a battery-powered fan to draw in ambient air through a filter cartridge then delivers filtered air to the user's hood, helmet, or facepiece via a breathing tube
Bullard™ EVA™ PAPR Accessory, Back Plate

Accessories and replacement parts for Powered-Air purifying respirator
Bullard™ Replacement SALUS HC Carriage Assembly

Replacement SALUS HC carriage assembly ONLY. Blower motor, HEPA filter, Breathing tube, and hood NOT included.
Bullard™ EVAHL PAPR System For Use with Hazardous Locations

Narrow profile PAPR offers workers protection in hazardous locations. System includes loose-fitting facepiece, blower, belt, battery, breathing tube, charger, air flow indicator, and head top with ratchet suspension.
Bullard™ EVA PAPR System with Double Bib Tychem QC Hoods

Evolutionary Air (EVA) Powered Air-Purifying Respirator (PAPR) use a battery-powered fan to draw in ambient air through a filter cartridge then delivers filtered air to the user's double bib hood via a breathing tube.
Online savings are available
Bullard™ EVA PAPR System with Double Bib Nomex Grinding Hoods

Ergonomically designed PAPR is ideal for use in hazardous locations.
Bullard™ Belts and Extender for EVA™ Powered-Air Purifying Respirators

Accessories and replacement parts for Powered-Air purifying respirator
Bullard™ EVA Healthcare PAPR Kit

Bullard™ EVA Healthcare PAPR Kit is a complete, ready-to-use PAPR system with HEPA Filter and large, loose-fitting facepiece
Bullard™ Tychem™ QC Dust Cover / Protective Sleeve Combo

Protect your equipment with the Bullard Dust Cover/Sleeve Combo, specifically designed for use with FSC and FC4 PAPR systems.
Bullard™ EVA™ Powered Air-Purifying Respirator Battery Packs

Batteries provide power to EVA™ PAPR system blower units.

Bullard™ Breathing Tube for EVA and EVAHL Powered Air-Purifying Respirator (PAPR) Systems

Choose from x-small, regular, or x-large threaded connector breathing tubes for use with EVA and EVAHL PAPR systems.

Bullard™ Blowers for EVA™ Powered-Air Purifying Respirators

Accessories and replacement parts for Powered-Air purifying respirator
Bullard™ Blower for EVA™ Powered Air Purifying Respirator

Constant flow blower is designed to complete the EVA powered air purifying respirator when assembled with a hood, breathing tube, and filter cartridge.
Bullard™ PA20 / PA30 PAPR Accessory, Breathing Tube Seal

For use with PA20 and PA30 PAPR series PAPR systems.
Bullard™ Blower Assembly for (EVAHL) PAPR System

Designed to be used with the EVAHL Powered Air Purifying Respirator
Bullard™ Blower Assembly for EVAHL Powered Air Purifying Respirator

EVAHL blower is approved for use in hazardous locations and designed to complete the EVAHL powered air purifying respirator when assembled with a hood, breathing tube, and filter cartridge.
Bullard™ Charger for EVAHL (Hazardous Locations) PAPR Systems

Designed to be used with the Evolutionary Air Hazardous Location Powered Air Purifying Respirator (PAPR).