Beaker Lids
Beaker Lids
DWK Life Sciences KIMBLE™ Silicone Lids
Reusable lids stretch easily and adapt to many container sizes, improves lab safety, enhances sample management, offers a more sustainable and cost-effective solution over foils, films and other single-use covers.
Promotions are available
PTFE Beaker Lids
For use with beakers
PTFE Beaker Cover-Watch Glass
For use as a beaker cover or a watch glass
Fisherbrand™ Lids for Fisherbrand Polystyrene Beakers with Pouring Lip
For use with Fisherbrand Polystyrene Beakers with Pouring Lip (14-955-112).
Corning™ Polyethylene Lids for Graduated Disposable Polypropylene Beakers
These replacement snap-on polyethylene lids fit on the Corning 250mL containers 02-540-11.
Electron Microscopy Sciences PTFE Beaker Cap, 500 ml
Is statically molded from virgin "PTFE" and machine finished to give a smooth surface for ease of cleaning and to eliminate contamination. Supplied with a pouring spout and they are virtually immune to chemical attack. Working temperature range is from cryogenic to 260 degree C (500 degree F). Ideal for use in wafer etching.
Capacity: 500 ml
Electron Microscopy Sciences Tri-Pour Beaker Cap for 400 ml beaker
The caps are available for all Tri-Pour beakers. The caps are wax impregnated, have lift-tabs, and may be written on for sample identification.
Use: 400 ml
Electron Microscopy Sciences Tri-Pour Beaker Cap for 1000 ml beaker
The caps are available for all Tri-Pour beakers. The caps are wax impregnated, have lift-tabs, and may be written on for sample identification.
Use: 1000 ml
Chemglass Life Sciences PTFE Standard Taper Adapter, 24/40 Outer, 3/4" Male NPT
PTFE Standard Taper Adapter, 24/40 Outer, 3/4" Male NPT. Replacement PTFE adapter for reaction vessel lids.
Electron Microscopy Sciences PTFE Beaker Cap, 400 ml
Is statically molded from virgin "PTFE" and machine finished to give a smooth surface for ease of cleaning and to eliminate contamination. Supplied with a pouring spout and they are virtually immune to chemical attack. Working temperature range is from cryogenic to 260 degree C (500 degree F). Ideal for use in wafer etching.
Capacity: 400 ml
Electron Microscopy Sciences Tri-Pour Beaker Cap for 250 ml beaker
The caps are available for all Tri-Pour beakers. The caps are wax impregnated, have lift-tabs, and may be written on for sample identification.
Use: 250 ml
Chemglass Life Sciences Reaction Vessel Lid, 4-Neck, 29/42 Center Neck, 2-24/40 Side Necks, 1- #7 Chem-Thread Side Neck, 150mm Schott Flange
Reaction Vessel Lid, 4-Neck, 29/42 Center Neck, 2-24/40 Side Necks, 1- #7 Chem-Thread Side Neck, 150mm Schott Flange. four neck vessel lid to fit CG-1920 through CG-1936 vessels. The #7 Chem-Thread will allow a thermometer or bleed tube having an O.D. of 4 to 7mm to be inserted vertically to the bottom of the vessel. Thread will accept CG-3504 adjustable immersion thermometers. Lid has a flat ground surface allowing it to be greased or used with an o-ring.
Electron Microscopy Sciences PTFE Beaker Cap, 250 ml
Is statically molded from virgin "PTFE" and machine finished to give a smooth surface for ease of cleaning and to eliminate contamination. Supplied with a pouring spout and they are virtually immune to chemical attack. Working temperature range is from cryogenic to 260 degree C (500 degree F). Ideal for use in wafer etching.
Capacity: 250 ml
Electron Microscopy Sciences Tri-Pour Beaker Cap for 100 ml beaker
The caps are available for all Tri-Pour beakers. The caps are wax impregnated, have lift-tabs, and may be written on for sample identification.
Use: 100 ml