Electrical Heating Mantles with Controllers
Electrical Heating Mantles with Controllers
Electrical heating mantles with controller include a controller device to regulate the uniform distribution of heat on laboratory glassware such as round-bottomed flasks. With expansive temperature exposure ranges available, the controller is used to increase temperature or maintain a constant process temperature on flask.
Electrical heating mantles with controllers are available in two configurations: as a single unit comprised of a mantle and integrated controller, or as a separate mantle and controller that are sold together. Common uses are boiling, distillation, extraction, and digestion.
Mantles with chamber linings that are soft-sided and flexible in shape can accommodate irregularly shaped glassware like round-bottomed flasks. Others have a more-defined shape that can be used only with straight-sided vessels, like beakers.
Electrical heating mantles may also include a number of safety features:
- Exterior
- Plastic-coated or chemical-resistant metal housing to minimize damage from spills
- Heat-resistant polypropylene housing to protect users from accidental burns
- Electrical systems
- Separate individual power controllers for each recess
- Thermally insulated and grounded
- Automatic shut-off when contact with liquid is detected
- Heating elements are insulated to prevent accidental contact
Electrical heating mantles may include a magnetic stirring feature to simultaneously mix and heat, with places for optional support rods to which clamps and other apparatuses may be attached. Indicator lights can show on-off status or may warn about residual heat after the units are turned off.
Fisherbrand™ Lower Hemispherical Heating Mantle and ON/OFF Control Bundle (°C Controller)
Fisherbrand™ Lower Hemispherical Heating Mantle and ON/OFF Control Bundle provides uniform heat distribution for round bottom flasks.
Fisherbrand™ CMUV Series Controlled Heating Electromantles
Special “V-shaped” design accepts 60° funnels, and accomodates pear-shaped and round bottom flasks
Fisherbrand™ Lower Hemispherical Heating Mantle and ON/OFF Control Bundle (°F Controller)
Fisherbrand™ Lower Hemispherical Heating Mantle and ON/OFF Control Bundle provides uniform heat distribution for round bottom flasks.
BriskHeat™ Lower Hemispherical Heating Mantle with SDC Digital Temperature Controller (°C.)
Excellent alternative to other heaters like bunsen burner with easly programmable temperature controller
BriskHeat™ Lower Hemispherical Heating Mantle with SDC Digital Temperature Controller (°F.)
Excellent alternative to other heaters like bunsen burner with easly programmable temperature controller
United Scientific™ Eco-Heat Heating Mantle
Eco-Heat Heating Mantle evenly heats up to 250 mL of liquid to a max temperature of 380°C.
Chemglass Life Sciences 300mL Glas-Col Heating Mantle, Series O, Hemispherical, 180 Watts
300mL Glas-Col Heating Mantle, Series O, Hemispherical, 180 Watts. The Glas-Col Series O mantle is a hemispherical style, meaning it covers only the bottom half of the flask. This allows full view of contents. The mantle accommodates single and multi-flasks. It should be used with the Series O supports. All mantles are 115 Volts and are supplied with a separable 4 foot, 2 wire cord and locking connector. For Series O supports see CG-10010 or CG-10012.
Chemglass Life Sciences 12000mL Glas-Col Heating Mantle, Series TM, Spherical, 2 @ 650 Watts
12000mL Glas-Col Heating Mantle, Series TM, Spherical, 2 @ 650 Watts. The Glas-Col Series TM spherical flask mantle covers only the flasks bottom half, letting you see its full contents. Larger sizes have multiple circuits for ease of temperature control when a flask is less than half full. The Series TM mantle is available with a bottom hole for flask drain on a special order basis. Terminal box models are available with switches and pilot lights. Mantles are 115 Volt.
Chemglass Life Sciences Heating Mantle, Lower Portion, Unjacketed Cylindrical Vessel, Reactor Capacity: 10 Liter, Watts: 450
Heating Mantle, Lower Portion, Unjacketed Cylindrical Vessel, Reactor Capacity: 10 Liter, Watts: 450. For use with CG-1924 and CG-1972 unjacketed cylindrical reaction vessels. TM Series aluminum housed glass fabric heating mantle with hole centered in the bottom. Mantle is 115 volts and is supplied complete with a separable 4ft 2-wire cord and locking connector.
Chemglass Life Sciences 25mL Glas-Col Micro Heating Mantle, Spherical, 30 Watts, 60 Volts
25mL Glas-Col Micro Heating Mantle, Spherical, 30 Watts, 60 Volts. The Glas-Col micro mantle provides precise heat control for small spherical flasks. This mantle is used extensively in analytical work and in purification of research products when only small samples are available. Supplied complete with a 3 foot, 2-wire cord and locking connector. NOTE: Due to the voltage of the micro mantle, a variable voltage transformer is required.
Chemglass Life Sciences OptiChem Heating Mantle Controller, Double Circuit, 7A, 840 Watts, (per Circuit), 120VAC
OptiChem Heating Mantle Controller, Double Circuit, 7A, 840 Watts, (per Circuit), 120VAC. Our OptiChem line of heating mantle controllers feature solid-state proportional voltage power control in a compact benchtop design. Controllers provide accurate manual control of heating mantles, tapes and all other resistive loads with an adjustable output range from 5 to 100% of the rated voltage. Controller is 8 W x 6 D x 3.7 H. All units are supplied with a 6ft separable power cord, a grounded, 3-wire receptacle and lighted power switch. 3-Year warranty.OptiChem is a Registered Trademark of Chemglass, Inc.
Chemglass Life Sciences 125mL Glas-Col Heating Mantle, Series O, Hemispherical, 80 Watts
125mL Glas-Col Heating Mantle, Series O, Hemispherical, 80 Watts. The Glas-Col Series O mantle is a hemispherical style, meaning it covers only the bottom half of the flask. This allows full view of contents. The mantle accommodates single and multi-flasks. It should be used with the Series O supports. All mantles are 115 Volts and are supplied with a separable 4 foot, 2 wire cord and locking connector. For Series O supports see CG-10010 or CG-10012.
Chemglass Life Sciences Glas-Col Heating Mantle Top, 3000mL Capacity, 200 Watts
Glas-Col Heating Mantle Top, 3000mL Capacity, 200 Watts. This Glas-Col mantle helps prevent vapor condensation in the upper half of a flask during distillation of high-boiling materials. The top is designed for use with CG-11000, CG-12000 or CG-125000 mantles. It protects the flask, the solutions, and the laboratory in these ways: 1) from stray drafts, which would disturb the reflux ratio during fractionation; 2) from flying glass of flask implosions in high-vacuum distillations; 3) from falling objects; and, 4) from thermal strain between top and lower half of flask during high-temperature operations. With a glass-fabric construction and laced-side opening, its elliptical hole accommodates a 1, 2, and 3-neck flask. All mantles are 115 Volts with the exception of the 72 Liter which is 230 Volt, and have a 4 foot, 2 wire cord with locking connector.
Chemglass Life Sciences 5000mL Glas-Col Heating Mantle, Series O, Hemispherical, 600 Watts
5000mL Glas-Col Heating Mantle, Series O, Hemispherical, 600 Watts. The Glas-Col Series O mantle is a hemispherical style, meaning it covers only the bottom half of the flask. This allows full view of contents. The mantle accommodates single and multi-flasks. It should be used with the Series O supports. All mantles are 115 Volts and are supplied with a separable 4 foot, 2 wire cord and locking connector. For Series O supports see CG-10010 or CG-10012.
Chemglass Life Sciences 1000mL Glas-Col Heating Mantle, Series O, Cylindrical, 4 3/16in ID x 6 7/8in Depth, 400 Watts
1000mL Glas-Col Heating Mantle, Series O, Cylindrical, 4 3/16in ID x 6 7/8in Depth, 400 Watts. This Glas-Col Series O mantle is used with a round bottom cylindrical reaction vessel, CG-1920 and CG-1922, featuring a Duran flange. The mantle covers the bottom and sides of the vessel leaving enough room under the flange to safely remove the reaction vessel clamp while the mantle is in place. Mantle is glass fabric, 115 volts, and is supplied with a separable 4 foot, 2 wire extension cord with locking connector. The 10,000mL size has two circuits at the listed wattage.
Chemglass Life Sciences 1000mL Glas-col Heating Mantle, Series O, Cylindrical, 4 3/16in ID x 6 7/8in Depth, Bottom Drain Opening, 400 Watts
1000mL Glas-col Heating Mantle, Series O, Cylindrical, 4 3/16in ID x 6 7/8in Depth, Bottom Drain Opening, 400 Watts. This Glas-Col Series O mantle is similar to CG-10007 except mantle is slit lengthwise to a 1 hole in the bottom center with lacing closure to accommodate a cylindrical reaction vessel, CG-1924, with a bottom drain. Mantle is glass fabric, 115 volts, and is supplied with a separable 4 foot, 2 wire extension cord with locking connector for each circuit. The 10,000mL size has two circuits at the listed wattage.
Chemglass Life Sciences Heating Mantle, Upper Portion, Unjacketed Cylindrical Vessel, Reactor Capacity: 20 Liter (Tall), Watts: 1250
For use with CG-1924 and CG-1972 unjacketed cylindrical reaction vessels. Glass fabric heating mantle with a lengthwise slit held together with a hook and lace closure. Mantle is 115 volts is supplied complete with a separable 4ft 2-wire cord and locking connector. Heating Mantle, Upper Portion, Unjacketed Cylindrical Vessel, Reactor Capacity: 20 Liter (Tall), Watts: 1250.
Chemglass Life Sciences Glas-Col Heating Mantle Top, 12000mL Capacity, 590 Watts
Glas-Col Heating Mantle Top, 12000mL Capacity, 590 Watts. This Glas-Col mantle helps prevent vapor condensation in the upper half of a flask during distillation of high-boiling materials. The top is designed for use with CG-11000, CG-12000 or CG-125000 mantles. It protects the flask, the solutions, and the laboratory in these ways: 1) from stray drafts, which would disturb the reflux ratio during fractionation; 2) from flying glass of flask implosions in high-vacuum distillations; 3) from falling objects; and, 4) from thermal strain between top and lower half of flask during high-temperature operations. With a glass-fabric construction and laced-side opening, its elliptical hole accommodates a 1, 2, and 3-neck flask. All mantles are 115 Volts with the exception of the 72 Liter which is 230 Volt, and have a 4 foot, 2 wire cord with locking connector.
Chemglass Life Sciences Glas-Col Heating Mantle Top, 22000mL Capacity, 650 Watts
Glas-Col Heating Mantle Top, 22000mL Capacity, 650 Watts. This Glas-Col mantle helps prevent vapor condensation in the upper half of a flask during distillation of high-boiling materials. The top is designed for use with CG-11000, CG-12000 or CG-125000 mantles. It protects the flask, the solutions, and the laboratory in these ways: 1) from stray drafts, which would disturb the reflux ratio during fractionation; 2) from flying glass of flask implosions in high-vacuum distillations; 3) from falling objects; and, 4) from thermal strain between top and lower half of flask during high-temperature operations. With a glass-fabric construction and laced-side opening, its elliptical hole accommodates a 1, 2, and 3-neck flask. All mantles are 115 Volts with the exception of the 72 Liter which is 230 Volt, and have a 4 foot, 2 wire cord with locking connector.
Chemglass Life Sciences 3000mL Glas-Col Heating Mantle, Series O, Cylindrical, 6 5/16in ID x 9in Depth, 900 Watts
3000mL Glas-Col Heating Mantle, Series O, Cylindrical, 6 5/16in ID x 9in Depth, 900 Watts. This Glas-Col Series O mantle is used with a round bottom cylindrical reaction vessel, CG-1920 and CG-1922, featuring a Duran flange. The mantle covers the bottom and sides of the vessel leaving enough room under the flange to safely remove the reaction vessel clamp while the mantle is in place. Mantle is glass fabric, 115 volts, and is supplied with a separable 4 foot, 2 wire extension cord with locking connector. The 10,000mL size has two circuits at the listed wattage.
Chemglass Life Sciences 20L (Short) Insulating Jacket
20L (Short) Insulating Jacket. Similar to CG-10009 but without the heating element. For use as a heat or cold shield on Chemglass jacketed reactors. Insulating jacket is made from a heavy fiberglass fabric on the inside with a silicone-coated fiberglass fabric on the outside. Mantle is slit lengthwise to a hole in the bottom center with lacing closure to accommodate a bottom drain valve.
Chemglass Life Sciences Heating Mantle, Upper Portion, Unjacketed Cylindrical Vessel, Reactor Capacity: 30 Liter, Watts: 1250
For use with CG-1924 and CG-1972 unjacketed cylindrical reaction vessels. Glass fabric heating mantle with a lengthwise slit held together with a hook and lace closure. Mantle is 115 volts is supplied complete with a separable 4ft 2-wire cord and locking connector. Heating Mantle, Upper Portion, Unjacketed Cylindrical Vessel, Reactor Capacity: 30 Liter, Watts: 1250.
Chemglass Life Sciences 500mL Glas-col Heating Mantle, Series O, Cylindrical, 4 3/16in ID x 4in Depth, Bottom Drain Opening, 250 Watts
500mL Glas-col Heating Mantle, Series O, Cylindrical, 4 3/16in ID x 4in Depth, Bottom Drain Opening, 250 Watts. This Glas-Col Series O mantle is similar to CG-10007 except mantle is slit lengthwise to a 1 hole in the bottom center with lacing closure to accommodate a cylindrical reaction vessel, CG-1924, with a bottom drain. Mantle is glass fabric, 115 volts, and is supplied with a separable 4 foot, 2 wire extension cord with locking connector for each circuit. The 10,000mL size has two circuits at the listed wattage.
Chemglass Life Sciences Heating Mantle, Upper Portion, Unjacketed Cylindrical Vessel, Reactor Capacity: 15 Liter, Watts: 930
For use with CG-1924 and CG-1972 unjacketed cylindrical reaction vessels. Glass fabric heating mantle with a lengthwise slit held together with a hook and lace closure. Mantle is 115 volts is supplied complete with a separable 4ft 2-wire cord and locking connector. Heating Mantle, Upper Portion, Unjacketed Cylindrical Vessel, Reactor Capacity: 15 Liter, Watts: 930.
Chemglass Life Sciences Glas-col Mantle Tripod Support for Series inMin, Mantle Size 22000mL, 14in Fixed Height, 489mm ID
Glas-col Mantle Tripod Support for Series inMin, Mantle Size 22000mL, 14in Fixed Height, 489mm ID. Glas-Col tripod support sits on the floor or a bench to hold a Series M mantle ranging in sizes from 3 to 22 liters. Mounting holes are in the foot of each leg for securing to floor or bench. Support is painted gray and shipped unassembled.
Chemglass Life Sciences Heating Mantle, Lower Portion, Unjacketed Cylindrical Vessel, Reactor Capacity: 30/50 Liter, Watts: 600
Heating Mantle, Lower Portion, Unjacketed Cylindrical Vessel, Reactor Capacity: 30/50 Liter, Watts: 600. For use with CG-1924 and CG-1972 unjacketed cylindrical reaction vessels. TM Series aluminum housed glass fabric heating mantle with hole centered in the bottom. Mantle is 115 volts and is supplied complete with a separable 4ft 2-wire cord and locking connector.