Test
Achieve improved cell clarity by removing excess hematoxylin from the slide with Epredia™ Shandon™ Nu-Clear™, a specially-formulated acid alcohol solution.
Product Type | Tissue Processing Reagent |
---|
Increase the affinity of the tissue for the slide with Epredia™ Tissue Section Adhesive: Pre-mixed and ready-to-use.
Obtain clear differentiation and contrast between the hematoxylin and eosin with Epredia™ Richard-Allan Scientific™ Differentiating Solution.
Solution to leaking formalin problems for improved histology studies
Content And Storage | 10% Neutral Buffered Formalin |
---|---|
Color | Clear |
Material | Polypropylene |
For Use With (Application) | Routine, special, IHC staining procedures |
Closure Type | Screw-on |
Sta-On is a liquid adhesive that is easy to use and convenient. 10mL are added to each liter of pre-warmed water in a tissue floatation bath. Diluted Sta-On can also be used to coat slides.
This ready-to use solution is effective on bone, nails and soft tissue. Simply soak pre-trimmed block surface in Soft Block for 5-15 minutes (depending on tissue sample size) then cut quality sections. Soft Block is environmentally safe, eliminating the need for any special waste disposal. Safe for equipment.
Buffered with phosphate in accordance with the A.f.I.P. manual of Histology. Filtered and ready-to-use. pH 6.9 to 7.1 at 25 degree C
pH: 6.9 to 7.1 pH at 25°C
BOND ancillaries have been designed for Leica Biosystems fully-automated BOND systems: BOND-MAX and BOND-III systems. Used in the development and validation of BOND ready-to-use primary antibodies and ISH probes - choose Leica Biosystems reagents for the assurance of a quality result in your laboratory.BOND Wash Solution 1X Concentrate is a concentrated buffer solution, requiring initial dilution. The diluted solution is for washing sections of formalin-fixed, paraffin-embedded tissue during staining on the BOND automated system.The BOND automated system requires the use of a specific wash buffer to remove unbound material at the end of each incubation step. This buffer is prepared by dilution, using BOND Wash Solution 1X Concentrate. The appropriate bulk container is then filled and placed within the BOND Processing Module.For in vitro diagnostic use.
Gill's Hematoxylin is a specially formulated solution for use as a biological stain for the nuclei and nuclear chromatin of normal and abnormal cells whether in whole or sliced cells. Gill's Hematoxylin is designed to use at its full strength. It is microfiltered prior to shipment; therefore, filtration before use is not required. For repeated use further filtration is recommended.
For all of the best results we offer ready to use Perfusion washes and fixatives which are recommended by the NeuroScience Association. All of our solutions are ready made and are of the highest quality. Perfusion wash and fixative reagent grade. To be used for Standard and ImmunoHistochemistry Stains. Paraformaldehyde 4%/Sucrose 4% in Phosphate Buffer 0.1M Ph 7.2. Grade: Reagent
Combine Epredia™ Phosphate Buffer with Giemsa, Wright, and Wright-Giemsa stains for excellent results.
Product Type | Phosphate Buffered Saline (PBS) |
---|