Liquid or Solid Extraction Devices
Liquid or Solid Extraction Devices
MilliporeSigma™ Supelco™ Receiving Vessel
With Ground or Threaded Joints
PYREX™ Jacketed Concentrator Tube 100mL
Permits solvent concentration to 1mL without risk of boiling to dryness
PYREX™ Replacement Extractor Cup
For use with PYREX Accelerated One-Step™ Extractor-Concentrator system
PYREX™ Accelerated One-Step™ Extractor/Concentrator Replacement Parts
For use with Accelerated One-Step Extractor/Concentrator Systems
Synthware™ Friedrichs Condenser, with Removable Hose Connections
Condenser has a spiral inner tube that a long vapor path that provides good heat transfer and anti-flooding characteristics
Synthware™ Friedrichs Condenser
Spiral inner tube with long vapor path provides good heat transfer and anti-flooding characteristics
Synthware™ Concentrator Tube, Graduated
For use with Kuderna-Danish evaporative set-ups
Synthware™ Friedrichs Condenser
Spiral inner tube with long vapor path providing good heat transfer and anti-flooding characteristics
DWK Life Sciences Wheaton™ 190mm Soxhlet Extractor With 24/40 Bottom Inner Joint and 34/45 Top Outer Joint
For continuous extraction of analytes from solid into organic solvent
Promotions are available
DWK Life Sciences Wheaton™ 22mm Extractor
For continuous extraction of analytes from a solid into an organic solvent
Promotions are available
DWK Life Sciences Kimble™ Kimble™ Kontes™ Extractor Body for Heavier Than Water Continuous Liquid Extraction Apparatus
Replacement component of 584190-0000, this Extractor Body designed for EPA priority samples where the extracting solvent is heavier than water.
Promotions are available
Foss™ Soxtec™ Extractor: Glass Extraction Cups
For Soxtec 2050 and 2055
Chemglass Life Sciences Extractor, Liquid-Liquid, Continuous, 45/50, 24/40
Extractor, Liquid-Liquid, Continuous, 45/50, 24/40. Similar in design to CG-1360 but with the addition of a 2mm PTFE stopcock in the return tube. Stopcock stops the flow after the extraction is complete. For samples of 1 liter plus approximately 200mL of extracting solvent. Extractor has a 45/50 top outer joint and a 24/40 inner joint on the uptake tube. Flask and condenser must be ordered separately.
Chemglass Life Sciences Extraction Apparatus, Soxhlet, Medium, 45/50, 24/40
Extraction Apparatus, Soxhlet, Medium, 45/50, 24/40. Similar to CG-1368, but supplied with a round bottom instead of a flat bottom flask. All specifications are the same as CG-1368.
Chemglass Life Sciences Medium Extractor Only, For Extraction Apparatus, Soxhlet
Medium extractor. Part of the CG1368 series. Extractor uses paper or CG-1372 glass thimbles.
Chemglass Life Sciences Extraction Apparatus, Jumbo, Size A
Extraction Apparatus, Jumbo, Size A. Jumbo Soxhlet extraction apparatus equipped with a Duran flange at the top of the extractor. Flange is formed with a groove in the flat portion of the mating surface to accept a PTFE covered silicone o-ring to permit grease free assembly. The adapter between the condenser and extractor has a top outer joint and a Duran flange which attaches to the extractor body with a CG-141 stainless steel clamp. Complete apparatus consists of a condenser, extractor, round bottom flask, adapter, PTFE covered o-ring and clamp. PTFE sleeves and heating mantles must be ordered separately.Extractor Capacity (mL) 500 Extractor I.D. (mm) 68 Extractor Flange Size 60 Extractor Lower Joint 45/50 Condenser Length (mm) 350 Paper Thimble Size (mm) 58 x 170 Flask Capacity (mL) 1,000
Chemglass Life Sciences Extractor B, 100mm flange
Extractor B, 100mm flange. Extractor replacement part for the CG137301 extraction apparatus. Fits Size B apparatus.
Chemglass Life Sciences Large Extractor Only, For Extraction Apparatus, Soxhlet
Large extractor. Part of the CG1368 series. Extractor uses paper or CG-1372 glass thimbles.
Chemglass Life Sciences Gregar Extractor, Complete
The Gregar Extractor†is the first major advance in laboratory extractor design in over 100 years. Developed by Joseph Gregar and Ken Anderson of Argonne National Laboratories, this extractor is the only unit on the market that can perform all three common types of extraction. During solid extractions the extractor operates upon the principle of continuous solvent displacement, permitting the sample to be immersed in solvent at all times, thereby increasing the efficiency of the solid-solvent interactions. The design eliminates packing and/or channeling of solid samples normally associated with common soxhlet extractors.Complete extractor is supplied with extractor body, cold finger condenser, extra coarse extraction thimble, and solvent guide. The CG150617, 24/40 250mL round bottom flask and auxiliary condenser (CG1213 or CG1218A) are sold separately.U.S. Patent Number D413678†Designed and developed by Joseph Gregar and Ken Anderson of Argonne National Laboratories
Macherey-Nagel SPE columns CHROMABOND XTR, 150 mL, 37.5 g
CHROMABOND columns XTR - volume: 150 mL, content of sorbent: 37.5 g kieselguhr - for volumes up to 50 mL - material: PP, with PE filter elements - pack of 10
Chemglass Life Sciences Extraction Apparatus, Soxhlet, Small, 34/45, 24/40
Extraction Apparatus, Soxhlet, Small, 34/45, 24/40. Soxhlet type extraction apparatus used for continuous extraction of solids with a suitable solvent. Extractor uses paper or CG-1372 glass thimbles. Condenser has an enlarged uptake tube to improve condensing capacity. Complete apparatus consists of an Allihn condenser, extractor and flat bottom flask.
Chemglass Life Sciences Large Extraction Apparatus Complete, Soxhlet, 55/50, 24/40
Extraction Thimble, Glass, Large, X-Coarse Frit, 45mm OD X 130mm Height. All glass extraction thimble permits viewing during extraction process and subsequent weighing. Sizes correspond to CG-1368 or CG-1369 extractor.
Chemglass Life Sciences Extraction Apparatus, Soxhlet, Small, 34/45, 24/40
Extraction Apparatus, Soxhlet, Small, 34/45, 24/40. Similar to CG-1368, but supplied with a round bottom instead of a flat bottom flask. All specifications are the same as CG-1368.
Chemglass Life Sciences Micro Size SOXHLET Extractor, Complete
Micro Size SOXHLET Extractor, Complete. Micro size Soxhlet extractor for use with 10 x 50mm paper or glass thimbles. Extractor body has a 19/22 top inner joint and a 14/20 lower inner joint. Complete apparatus consists of the extractor body, condenser, and 25mL round bottom flask. Glass thimbles must be ordered separately.
Chemglass Life Sciences Extractor, Soxhlet, Micro, Extractor only
Extractor replacement part for the micro size Soxhlet extractor (CG137401). EXTRACTOR ONLY.
Chemglass Life Sciences Extractor, Liquid-Liquid, Continuous, 45/50, 24/40
Extractor, Liquid-Liquid, Continuous, 45/50, 24/40. Extractor designed for EPA priority pollutant samples where the extracting solvent is heavier than water. For samples of 1 liter plus approximately 200mL of extracting solvent. Extractor has a 45/50 top outer joint and a 24/40 inner joint on the uptake tube. Flask and condenser must be ordered separately.
Chemglass Life Sciences Extraction Apparatus, Soxhlet, Large, 55/50, 24/40
Extraction Apparatus, Soxhlet, Large, 55/50, 24/40. Similar to CG-1368, but supplied with a round bottom instead of a flat bottom flask. All specifications are the same as CG-1368.
- 1
- 2