Process Controllers and Analyzers
Process Controllers and Analyzers
Fisherbrand™ Traceable™ Manometer Pressure/Vacuum Gauges
Portable units measure and display differential pressure/vacuum in 11 different units (psi, mbar etc)

Fisherbrand™ Traceable™ Pressure/Vacuum Gauges
Measure in millimeters of mercury, pounds per square inch, bars, meters of water and atmospheres
Sartorius Heater Module (1mg, 40g) for Mark 3 LTE Moisture Analyzer

Modular add-on to the Sartorius Mark 3 LTE Moisture Analyzer (max. two heater modules). System status indicator lights include two tri-color LEDs (balance and heater) on the front of the heater module.
Promotions are available
Sartorius LMA200PM Microwave Moisture Analyzer

Produces results up to 300x faster than a drying oven for samples with high moisture content. Sartorius LMA200PM Microwave Moisture Analyzer has an in-built analytical balance which ensures high precision in moisture analysis.
Promotions are available
MilliporeSigma™ Pressure Gauge Assembly
Packed in a poly bag
Welch™ Thermocouple One-Station Vacuum Gauge
Rugged portable gauge with probe and cable
Labconco™ Field Power Kits

For use with CApture™ Portable Fuming System
Welch™ Handheld Vacuum Gauges
For fast, easy vacuum measurements at multiple locations
Restek™ Replacement Combination Vacuum/Pressure Gauges

2 in. vacuum/pressure gauges
Restek™ ProFLOW 6000 Electronic Flowmeter

With hard-sided carrying case
Innocal™ NIST-Traceable Calibration; Pressure/Vacuum Gauge, 1% Accuracy
InnoCal™ performs NIST-traceable pressure calibrations on absolute, gauge, and vacuum measuring instruments.
Digi-Sense™ Precalibrated Pressure and Flow Meter
Easily determine the performance of your heating and cooling systems
Restek™ Soap Film Bubble Flowmeter

For flows between 0.1 and 10 cc/min. requires 1mL flowmeter
Restek™ 2-Inch Vacuum Gauge

High-quality vacuum gauges with 316 stainless steel wetted surfaces
Edwards Active Pirani Gauges (APG)
Combine the gauge head and controller in one compact active unit
Chemglass Life Sciences Vacuum Gauge Trap

Vacuum Gauge Trap. Trap provides protection of vacuum gauges from particulates which contaminate the mercury when the gauge is vented to the atmosphere. Supplied packed with glass wool. Hose connections have a 9mm OD at the middle serration.

Chemglass Life Sciences Vacuum Gauge, Digital, 110/240 Volt, Complete

Vacuum Gauge, Digital, 110/240 Volt, Complete. This unit measures vacuum in Torr and uses a rugged thermocouple vacuum gauge tube. The gauge controller is housed in a laboratory grade case constructed of vinyl clad metal on an extruded aluminum base ensuring maximum durability. The gauge is highly resistant to shock because it has no moving parts, thus requiring infrequent calibration. The gauge controller has a large bright LED display which can be easily read from across the room or in dimly lit locations. This gauge measures from 1 micron (1x10-3 Torr) all the way up to 760,000 Microns (760 Torr)or Atmosphere. The wide range of this vacuum instrument enables users to easily troubleshoot their system Gauge tube is threaded with 1/8” male NPT for use with AF-0306 adapter.

Cole-Parmer Cole-Parmer Digital Pressure Gauge, 0 to 145 psi, with 1/8" NPT(M) Connections
Designed for use in numerous applications and industries, these digital gauges can be used for air pressure measurement in marine and diving, filtration, compressor and pneumatic regulators measurement, laboratory vacuum and pressure measurement, as well as aviation and defense, and general OEM use where air or compatible gases are used and brass can be used.
These high-accuracy, low-cost digital gauges have a four-digit, 1/2"H LCD and read in psi, bar, mPa, and kg/cm2. Gauges have a 1 3/4" (44.5 mm) dial and come in three styles — 0 to 145 psi in 1/8" or 1/4" NPT(M) connection, and vacuum to 100 psi in 1/8" NPT(M) connection.

Cole-Parmer Digi-Sense High-Accuracy Digital Gauge, 0 to 30 psig, 4-Digit LCD
These digital pressure and vacuum gauges are an ideal alternative to your mechanical gauges! These gauges offer high accuracy plus the convenience of a digital display. The semiconductor sensing element measures pressure with ±0.25% or ±0.5% accuracy (depending on the range), and lasts for millions of cycles. These gauges come standard with Zero-Reset, Backlight, and Auto-Shutoff to help prolong battery life. Peak hold is standard on all pressure units. As an option, some models can also come with a 4/20mA transmitter and NPN limit switch. These units are line powered with 8-30VDC.

Cole-Parmer Ashcroft 1032S3.5 3.5" Sanitary Pressure Gauge 100 psig, 1.5" Tri-Clamp
The Ashcroft Type 1032 Sanitary Pressure Gauge is specifically designed for applications in the food, pharmaceutical and biotechnical industries where small size and sanitary conditions are a priority. This compact autoclavable gauge features all stainless steel construction, temperature-vented case, built-in pressure dampening and a self-draining case to facilitate wash downs. The gauges can also be cleaned or steamed in place.

MSC Mitutoyo 293-130-10 0mm to 25.4mm 0.98" Throat Electronic Outside Micrometer 0.00010mm Resolution, 0.000020" Accuracy, Ratchet-Friction Thimble
Mitutoyo 293-130-10 0mm to 25.4mm 0.98" Throat Electronic Outside Micrometer 0.00010mm Resolution, 0.000020" Accuracy, Ratchet-Friction Thimble

Glas Col LLC Control

PowrTwin proportional voltage controller. Capable of controlling two separate circuits. 5-100% adjustable, 7A, 2 circuits @ 840W, 120V. Precise manual control.

Pendotech Pendotech Pressuremat Monitor, Transmitter, And Alarm (Pmat4R)
PressureMAT monitor, transmitter, alarm for four single use pressure sensors (with 4 alarm relay outputs)
