Test
Both sides of the tape have a thick conductive adhesive (conductive inner film is 35µm and the adhesive is 45µm on each side for a total of 125µm [5 mils]) with a white liner. The double adhesive and conductive design permits quick mounting of samples without using liquid or colloidal adhesives. The tape is relatively solid and non-porous and does not absorb small samples. The variety of widths affords efficient application to various specimen mount surface sizes. Thickness is 0.16mm. Available in six widths. Can be used down to -20°C (-4°F) and temperature maximum is 60°C (140°F). Available in 5, 8, 12, 20, 25, and 50mm W x 20m L (0.19, 0.31, 0.47, 0.79, 0.98, and 1.96" x 21.8 yd). Core diameter is 76mm (3"). SEM mounts not included.
Silver flakes in an inorganic silicate aqueous solution, specially formulated adhesive for demanding bonding applications.
Copper Conductive Tape, Double Sided Adhesive, 12.7mm W x 16.4m L
SEM conductive tape, electrically conductive with a clean, smooth background. Nickel is embedded in the adhesive.
Electrically and thermally conductive adhesive, Nickel filled, One part system, Low viscosity, For applications up to 1000 deg F.
Can be used to mount particles 15-20 microns. Isolate unwoved cloth. Adhesive power/25mm: 1000 gf.
Conductive resistivity: 50ohm/sq.Inch
Thickness: 0.16 mm
Pad: 0.07 mm
Adhesive: 0.045 mm x 2
These carbon tapes are conductive and may be used conveniently for scanning electron microscopy or EDS applications. This is the same material as the PELCO Tabs™, Carbon Conductive Tabs, but in tape form. The tape form allows for special application uses such as custom sizes, cut-outs and shapes. The purity of this tape is identical to the PELCO Tabs™; only very small impurities of Al and Si may be found. Both sides of the tape have a thick conductive adhesive (conductive inner film is 35µm and the adhesive is 45µm on each side for a total of 125µm [5 mils]) with a white liner. The double adhesive and conductive design permits quick mounting of samples without using liquid or colloidal adhesives.
The PELCO Pro Cyanoacrylate Debonder destabilizes and debonds cured cyanoacrylates. Useful for releasing specimens from holders, cleaning cyanoacrylates from surfaces and removing cured cyanoacylates from fingers. Works on all brands of cyanoacrylate glue (Loctite, Henkel, Permabond, 3M™, PELCO, Aron Alpha, etc.). The debonder is also a solvent, please check before using on plastic surfaces / samples and avoid repeated skin contact. Supplied in 20ml bottle with dispenser tip.
Tape, Conductive; Copper; 3M; Single Adhesive Surface; 12.7mm; The tape offers excellent conductivity through the foil backing; Foil Thickness: 0.04mm; Total Thickness: 0.07mm; Resistance through Adhesive: 0.005 ohm
Premixed, prebuffered fixatives, are pH adjusted for immediate laboratory use. They are freshly prepared upon receipt of order to ensure maximum shelf life. The fixatives are filled in 20 ml glass vials (10 ml/vial). This allows for the immediate fixation of your specimens without costly and time consuming transfer associated with ampoule contained fixatives. In Sorensons Buffer.
pH: 7.2
50-224-1507 1GAL SOLVENT CAN XYLOL THINNER
NC2877475 TUBING POLYURTHN 12MM BLUE 20M
NC2607502 CARBON-SUPPORT-FILM-FOR-TEM
NC2595283 SU-8 2000 THINNER IN 1L
Copper Conductive Tape, 6.3mm W x 16.4m L; 1/4 in. x 18yd, Core diameter is 76mm, Foil Thickness: 0.04mm, Total Thickness: 0.07mm, Resistance through Adhesive: 0.005ohm