Test
Amicon stirred cells concentrate samples rapidly but gently, using magnetic stirring to minimize concentration polarization and shear stress-induced denaturation.
Type | Ultrafiltration Equipment |
---|
Amicon stirred cells concentrate samples rapidly but gently, using magnetic stirring to minimize concentration polarization and shear stress-induced denaturation.
Type | Ultrafiltration Equipment |
---|---|
For Use With (Equipment) | Ultracel™, Biomax™, and Durapore™ membrane discs for use in stirred cells |
For Use With (Application) | Concentration, Buffer Exchange, Desalting |
Autoclavable | Autoclavable |
Access contents without dismantling via top plate opening. MilliporeSigma™ Solvent-resistant Stirred Cells, For 47mm Membranes is used for protein desalting, purification and concentration. The in-place disc filter is inside a glass cylinder with PTFE components for broad compatibility. Autoclavable.
Use with solutions up to 10% macrosolute concentration. Amicon™ Stirred Cell Seal Kit includes 3 silicone gaskets and O-rings. The Amicon stirred cell model provides high flow rates and is capable of rapid concentration or salt removal / concentration in the same unit.
Type | Ultrafiltration Equipment |
---|---|
Quantity | 3 Ea. gaskets and O-rings |
Material | Silicone |
For Use With (Application) | Protein desalting, purification and concentration |
Autoclavable | Autoclavable |
The Sterlitech HP4750X stirred cell is a high-pressure chemical resistant stirred cell that performs a wide variety of membrane separations.
HP4750X Stirred Cell Product Benefits:
HP4750X Stirred Cell Product Availability:
HP4750 Membrane Area Reducer, 25mm, includes Porous Support Disc and O-ring.
Membrane active area using this reducer is 0.35 in2 (2.24 cm2).
The Sterlitech HP4750 stirred cell is a high-pressure stirred cell that is both chemically resistant and features a low hold-up volume (1 ml). This particular brand of stirred cell is able to perform a wide variety of membrane separations.
HP4750 Stirred Cell Product Benefits:
The Sterlitech CF042 membrane cell is a lab scale cross flow filtration unit designed to provide fast and accurate performance data with minimal amounts of product, expense, and time.
CF042 Membrane Cell Product Availability:
Please note: A feed flow pump is required to operate the CF042 cross flow cell unit. We recommend the Hydracell pump by Wanner Engineering, which is a positive displacement, diaphragm pump designed for high pressure, lower flow applications. Min power available is 110V, 60 Hz. 220 V and 50 Hz motors are also available. There may be an additional cost if a variable speed drive is required.
The Sterlitech CF042 membrane cell is a lab scale cross flow filtration unit designed to provide fast and accurate performance data with minimal amounts of product, expense, and time.
CF042 Membrane Cell Product Availability:
Please note: A feed flow pump is required to operate the CF042 cross flow cell unit. We recommend the Hydracell pump by Wanner Engineering, which is a positive displacement, diaphragm pump designed for high pressure, lower flow applications. When ordering, be sure to specify the power requirements for the motor. The minimum power available is 110V, 60 Hz. 220 V and 50 Hz motors are also available. There may be an additional cost if a variable speed drive is required.
Sterlitech HP4750 High Pressure Stirred Cell Kit
Includes:
Stirred Cell; 150mm dia; 2000 mL cell capacity; Acrylic
HP4750 High Pressure Hose, 6ft length.
Hose includes one ¼” compression to ¼” male NPT adapter, which is used to connect the hose to the inlet of the HP4750 Cell. The other ¼” tube end of the hose is swaged into the Pressure Bleed Valve.
The Sterlitech CF042 membrane cell is a lab scale cross flow filtration unit designed to provide fast and accurate performance data with minimal amounts of product, expense, and time.
CF042 Membrane Cell Product Availability: