Drying Tubes
Drying Tubes
Bel-Art™ SP Scienceware™ Polyethylene Drying Tubes with Tubing Fittings
Fill these unbreakable polyethylene straight tubes with a desiccant. Tubes supplied with fittings that accept 0.25 - 0.375 in. tubing.

DWK Life Sciences Kimble™ Kontes™ Drying U-Shaped Full Length Joint Tubes
Bulb desiccant chamber
Promotions are available
Synthware™ Craig Recrystallization Tube

Complete with glass outer tube and inner plug
Synthware™ Drying Tube, 90° Bent, Microscale

Drying tube is used to protect moisture sensitive reactions from atmosphere while permitting system to remain unsealed. For microscale applications
DWK Life Sciences Kimble™ Kontes™ Bent Drying Tubes with Standard Taper Joints
Bent at 75° for use in fume hoods where a vertical-type tube won't fit
Promotions are available
DWK Life Sciences Kimble™ Kontes™ Drying Tube for Microflex Kit
Promotions are available
Bel-Art™ SP Scienceware™ Polyethylene Drying Tubes with Tubing Fittings

Fill these unbreakable polyethylene straight tubes with a desiccant. Tubes supplied with fittings that accept 0.25 - 0.375 in. tubing.
Chemglass Life Sciences Drying Tube, Straight, 14/20 Joint Size

Drying Tube, Straight, 14/20 Joint Size. Similar to CG-1293 but with the addition of a top standard taper outer joint of the same size as the lower inner joint.

Chemglass Life Sciences Drying Tube, Straight, 14/20 Inner Joint

Drying Tube, Straight, 14/20 Inner Joint. Vertical drying tube with a beaded top and lower inner joint.

Chemglass Life Sciences Drying Tube, U Shaped, 14/20 Inner Joint, # 00 Rubber Stopper

U shaped drying tube supplied complete with rubber stopper, glass inlet tube, and a lower inner joint.

Chemglass Life Sciences Drying Tube, Schwartz, 130mm Wide x 145mm Height

Drying Tube, Schwartz, 130mm Wide x 145mm Height. Schwartz type drying tube having 14/20 hollow stoppers. Stoppers have a hole that aligns with a serrated hose connection for on/off action. Overall height is approximately 170mm.

Chemglass Life Sciences Drying Tube, Straight, 19/22 Inner Joint

Drying Tube, Straight, 19/22 Inner Joint. Vertical drying tube with a beaded top and lower inner joint.

Chemglass Life Sciences Drying Tube, 75° Degree, 19/22 Inner Joint, # 00 Rubber Stopper

Drying Tube, 75° Degree, 19/22 Inner Joint, # 00 Rubber Stopper. The 75º angle drying tube is for use in fume hoods where space is at a minimum. Supplied complete with rubber stopper, glass inlet tube, and a lower inner joint.

Chemglass Life Sciences Drying Tube, U Shaped, 24/40 Inner Joint, # 3 Rubber Stopper

U shaped drying tube supplied complete with rubber stopper, glass inlet tube, and a lower inner joint.

Chemglass Life Sciences Drying Tube, 75 Degree, 14/20 Inner Joint, # 00 Rubber Stopper

The 75 angle drying tube is for use in fume hoods where space is at a minimum. Supplied complete with rubber stopper, glass inlet tube, and a lower inner joint.

Chemglass Life Sciences Drying Tube, 75 Degree, 24/40 Inner Joint, # 3 Rubber Stopper

The 75 angle drying tube is for use in fume hoods where space is at a minimum. Supplied complete with rubber stopper, glass inlet tube, and a lower inner joint.

Chemglass Life Sciences Drying Tube, Minum-Ware

Drying Tube, Minum-Ware. Used to protect moisture sensitive reactions from the atmosphere while permitting the system to remain unsealed. Inner joint is a 14/10.

PYREX™ Drying Tubes
U-shaped tube has length of 183 mm
DWK Life Sciences Wheaton™ Drying Tube With 14/20 Joint
Silver diethyldithiocarbamate method
Promotions are available