Full-Face Respirators
Full-Face Respirators
Full-face respirators are reusable air-purifying devices that protect both the respiratory tract and eyes from exposure to harmful, irritating substances including dusts, fogs, fumes, mists, smokes, sprays, vapors, gases, and other airborne particulates. They feature a flexible seal that ensures a sealed fit around the full perimeter of the face. Full-face respirators have an Assigned Protection Factor (APF) of 50, and may be constructed of silicone, thermoplastic, or rubber materials to allow repeated cleaning, disinfection, storage, and reuse.
Full-face respirators are designed to be used with National Institute for Occupational Safety and Health (NIOSH)-rated particulate filters, and/or cartridges. Filters and cartridges are designed to be worn with a specific respirator and are not interchangeable with every model or type of respirator facepiece.* Filters and cartridges may be securely attached using a bayonet (pin-and-socket) or threaded (screw-type) fitting.
Full-face respirators are available in x-small, small, medium, and large sizes. They may be worn with hard hats, hoods, or face shields. Strap harnesses or ratchet suspensions ensure a secure fit to the wearer’s head and are typically constructed of a durable, flexible material such as polyester, elastic, nylon, or rubber. Straps and harnesses should be tightened or loosened with the respirator in place.
Gas masks are air-purifying respirators equipped with a full-face respirator or mask, and include cartridges or canisters to filter specific harmful or irritating chemical gases from the air. Typically worn by first responders, law enforcement, and counter terrorism personnel, they are only effective when used with filters and/or cartridges specifically suited for protection from gaseous biological or chemical substances.
The Occupational Safety and Health Administration (OSHA) requires fit testing prior to first-time use, and on a consistent annual basis thereafter. Wearers should always inspect the respirator before each use to determine whether or not the respirator is complete and undamaged and to verify that the sealing material properly adheres to the face.
*Regulatory compliance details and filter/cartridge compatibility can be obtained at the individual product level.
- (5)
- (1)
- (27)
- (5)
- (1)
- (7)
- (44)
- (13)
- (2)
- (8)
- (1)
- (8)
- (1)
- (3)
- (5)
- (3)
- (3)
- (1)
- (7)
- (3)
- (4)
- (1)
- (1)
- (6)
- (1)
- (1)
- (10)
- (14)
- (3)
- (5)
- (3)
- (4)
- (8)
- (3)
- (38)
- (3)
- (4)
- (1)
- (6)
- (5)
- (62)
- (9)
- (3)
- (3)
- (3)
- (19)
- (27)
- (6)
- (27)
- (3)
- (6)
Filtered Search Results
3M™ Full Facepiece 6000DIN Series Respirator
Lightweight full-facepiece respirator with built-in DIN port adapter assembly features a well-balanced design and silicone faceseal for enhanced comfort, durability and ease of cleaning. Available in air-purifying, supplied air, and powered air purifying respirator modes.
Includes | Din port adapter assembly |
---|---|
Material (Lens) | Polycarbonate |
For Use With (Equipment) | 3M™ Filters 2000 Series, 3M™ Filter 7093, P100, 3M™ Cartridges 6000 Series |
Product Type | Gas Mask Respirator |
Suspension Type | 4-point |
Color | Gray |
Connection Type | Bayonet |
Material | Silicone, Thermoplastic Elastomer |
Facepiece Material | Silicone |
ANSI Standard | ANSI Z87.1 |
For Use With (Application) | Assembly, cleaning, demolition, facility maintenance, grinding, machine operation, painting, remediation, sanding, welding |
Certifications (NIOSH) | NIOSH 42 CFR Part 84 |
3M™ 6000 Series Reusable Full Facepiece Respirator
Requires limited maintenance time—reducing need for expensive repair programs
Includes | Large lens with scratch-resistant hard coating |
---|---|
For Use With (Equipment) | 3M™ cartridge 6000 series, filter 2000, 2200, 7000 or 5000 series or 3M™ dual airline system |
Product Type | Full Facepiece Respirator |
Suspension Type | 4-point |
Connection Type | Bayonet |
Material | Silicone, Thermoplastic Elastomer |
Certifications/Compliance | NIOSH, ANSI Z87.1-2010 |
For Use With (Application) | Assembly, cleaning, demolition, facility maintenance, grinding, machine operation, painting, remediation, sanding, welding |
3M™ Ultimate FX FF-400 Series Full Facepiece Respirator
Rugged facepiece equipped with a large Scotchgard™ coated lens is designed to provide flexibility in extreme environments.
Includes | Speaking diaphragm |
---|---|
Material (Lens) | Scotchgard™ |
For Use With (Equipment) | 3M™ Particle Filters 2000, 2200, 7000, or 5000 Series, 3M™ 6000 Series Gas/Vapor Cartridges and 3M™ 6000 Combination Cartridges |
Product Type | Full Facepiece Respirator |
Suspension Type | 6-point |
Color | Black |
Connection Type | Bayonet |
Material | Silicone |
Facepiece Material | Silicone |
Scott Safety™ Promask 25 Facepiece
Promask 25 full facepiece respirators are ergonomically designed to be lightweight and well-balanced, suitable for use in any industrial or manufacturing environment.
Includes | Speaking Diaphragm |
---|---|
Lens Type | Wide |
Material (Lens) | Polycarbonate |
Product Type | Full Facepiece Respirator |
Suspension Type | 5-point |
Material | Thermoplastic Elastomer |
Facepiece Material | Thermoplastic Elastomer |
Scott Safety™ AV-3000™ Facepiece with SureSeal
Top-Down Convertibility design allows a single facepiece for APR, PAPR, SAR and SCBA respirators.
For Use With (Equipment) | Av-3000™ facepiece |
---|---|
Product Type | Facepiece |
Latex Free | Yes |
3M™ 7800S Reusable Full Facepiece
Can be used with 3M Series 2000 or 7093 filters or Series 6000 cartridges
For Use With (Equipment) | 3M™ series 2000 or 7093 filter or series 6000 cartridge |
---|---|
Connection Type | Bayonet, DIN |
Material | Silicone, Polycarbonate Lens |
Certifications/Compliance | NIOSH 42CFR84 |
For Use With (Application) | Mining, oil and gas, construction, general manufacturing, transportation |
3M™ Secure Click™ Full Facepiece Reusable Respirator
The Secure Click™ Full Facepiece Reusable Respirator helps protect against particulates and/or a wide variety of gases and vapors when used with approved Secure Click™ filters and cartridges.
Includes | 4 Respirators |
---|---|
No. of Ports | Dual |
Product Type | Respirator |
Color | Black |
Latex Free | Yes |
Neck Strap | No |
With Exhalation Valve | No |
Certifications (NIOSH) | NIOSH Approved |
Dentec Safety™ Comfort-Air™ Series 130M Full Facepiece Respirators with Inner Mask
Supplier Diversity Partner
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More
Special compression silicone full facepiece respirators with inner mask feature large inhalation valves that allow for maximum inhalation. Available to purchase with or without cartridges and filter assemblies.
Lens Type | Anti-fog |
---|---|
Size | Medium |
Suspension Type | 5-point |
Color | Blue |
Material | Silicone |
Facepiece Material | Silicone |
With Exhalation Valve | Yes |
Certifications (NIOSH) | NIOSH 42 CFR Part 84 |
Includes | Rubber net head harness |
---|---|
For Use With (Equipment) | Advantage™ 3100 full facepiece single port respirator |
Product Type | Facepiece |
MSA™ Millennium™ CBRN Gas Mask
High-performance, Hycar™ rubber gas mask is ideal for use by law enforcement or emergency response personnel
Includes | Drinking port, speaking diaphragm |
---|---|
Product Type | Millennium™ Cbrn Gas Mask |
Connection Type | 40 mm thread |
Material | Hycar Rubber |
Certifications/Compliance | NIOSH, CBRN |
For Use With (Application) | CBRN incidents, civil disturbances, clandestine labs |
MSA™ Advantage™ 1000 CBA-RCA Gas Masks
Clean, simplified respirator is up to 40% lighter than conventional full-face respirators
Includes | Canister, nosecup with two check valve and identification tag |
---|---|
Product Type | Gas Mask |
Connection Type | Dual-canister mount |
Certifications/Compliance | NIOSH, CBRN |
For Use With (Application) | CBRN incidents, civil disturbances, clandestine labs |
MSA™ Advantage™ 3100 Full-Facepiece Respirators
With scratch-resistant, wraparound lens that eliminates distortion and increases peripheral vision
Moldex™ 9000 Series Full Face Respirator Facepiece
Supplier Diversity Partner
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More
At less than 13 ounces, the 9000 Series respirator is ultra-lightweight. Workers will appreciate the comfort and longer wearability and employers will benefit from increased user acceptance.
Includes | Tear-away lens protector |
---|---|
Product Type | Respirator Facepiece |
Harness Style | Stand away |
Material | Polycarbonate Lens |
Certifications/Compliance | ANSI Z87+ |
For Use With (Application) | Mines, refineries and other industries where metal parts can create an explosion hazard |
3M™ FR-7800B Respirator Full Facepieces
Integral speaking diaphragm improves voice amplification and clarity
Includes | Integral speaking diaphragm |
---|---|
For Use With (Equipment) | Air purifying respirator |
Product Type | Full Facepiece |
Suspension Type | 6-point strap |
Material | Silicone, Butyl Rubber Faceshield |
Certifications/Compliance | NIOSH, CBRN, ANSI Z87.1-2003 |
For Use With (Application) | CBRN applications when used with 3M™ canister fr-15-CBRN |
MSA™ Advantage™ 4000 Full Facepiece Respirators, Push-To-Connect Adapter
Full-face reusable respirators with push-to-connect adapter are ideal for a variety of applications. Advantage™ 4000 series is compatible with several MSA respirator models, including air-purifying respirators, supplied-air respirators and powered air-purifying respirators.