Test
For Use With (Equipment) | Carboys |
---|---|
Product Type | Spigot Fitting |
Material | Polypropylene |
For Use With (Equipment) | Carboys |
---|---|
Product Type | Spigot Fitting |
Material | Polypropylene |
3/4 in. Drum Faucet Flo Rite, Inside 5/8 in. diameter of barrel & spout afford largest possible flow form 3/4 in. drum opening. Min. order qty. 20 pieces
Quick Serve 38mm Tap - 7/8" OD x 3/4" ID
LEAK PROOF CARBOY SPIGOT FITS MOST CARBOYS CARBOY REPLACEMENT SPIGOT
NC2683477 U725 SPIGOT PART
Drum Facet, 2 in., 2-3/16 in. O.D. Outlet, Polyethylene, For Use With Steel and Polyethylene Drums, Instant (On) - (Off) Control Provides Smooth, Fast Flow with No Dribble, Do Not Use
NC1605501 AEROFLOW 3/4IN SELF VENTING TA
NC0937273 38MM PP 1/2INID NO DRIP SPIGOT
Clear Screw 9-425 Thread Vials, 2mL, with Spot, Caps sold separately, PK/100,CS/10PKS
AMBER Screw 9-425 Thread Vials, 2mL, with Spot, Caps sold separately, PK/100,CS/10PKS
NC2284751 HIGGINS PS-0530-C183
This item has a minimum qty of 5 per supplier requirements.
AERATOR CHROME/BRASS; Water Saver; AP Chem
225-1001-RLS: Spigot, Up/Down Lever, 2pk. Foxx Life Science EZgrip Polypropylene carboy spigots have large levers that control two flow rates, one for continuous, locked flow and the other for a faster, manual flow. The spigot spout features 5/8" and 3/4" hose barbs, and a standard internal luer tape to fit a male barb adapter. The spigot body has internal threads with a hard stop to prevent over-tightening which may damage the seal. The carboy spigot is ideal for storing and dispensing fluids. Spigots are made from polypropylene, which may be autoclaved at 15 PSI and 121C (250F) for 20 minutes.
NC1936278 SPIGOT FOR 20L CUBE