Rotary Traps
Rotary Traps
DWK Life Sciences Kimble™ Glass-filled Nylon Connectors with PTFE Seals
Kimble™ Glass-filled Nylon Connectors with PTFE Seals are threaded connectors used for coupling two items with a GPI finish.
Promotions are available
Synthware™ Rotary Evaporator Anti-Splash Adapters
Prevents possible contamination from rotary evaporator
Synthware™ Rotary Evaporator Anti-Splash Adapters, Modified
With two 4 mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask
Fisherbrand™ Kontes™ 100mL Rotary Evaporator Trap with Square Joint Bead, with Drain Holes
Use where foaming is likely to occur and be drawn into the condenser. Available in 160mm length with 14/20 bottom joints or 180mm length with 24/40 bottom joints.
DWK Life Sciences Rotary Evaporator Trap with Drain Holes
Use where foaming is likely to occur and be drawn into the condenser.
Promotions are available
BUCHI Screw Cap Svl 15
For use with BUCHI Rotary evaporator.
PYREX™ Evaporator Traps, Standard Taper Joints
Used when foam is likely to be created and drawn into the condenser of rotary evaporator
DWK Life Sciences Kimble™ Kontes™ Self Washing with Square Joint Bead Rotary Evaporator Trap
This trap is designed to eliminate hold-up common to the round style of rotary evaporator traps. Available in 100mL or 250mL capacities, with 14/20 or 24/40 bottom taper joints and 24/40 top taper joints.
Promotions are available
DWK Life Sciences Kimble™ Kontes™ Rotary Evaporator Traps With Inner Vapor Tube at Bottom
Use when foam is likely to be created and drawn into the condenser
Promotions are available
Synthware™ Rotary Evaporator Anti-Splash Adapters, Modified, with Fritted Disc
Used when foam is likely to be created and drawn into the condenser of rotary evaporator
Synthware™ Rotary Evaporator Anti-Splash Adapters with Fritted Disc
Prevents contents of the flask to be drawn into the condensor in the event of bumping
Synthware™ Distilling Trap Adapters
Placed above flask to prevent carry-over of reactions which have a tendency to foam
Synthware™ Vapor Duct
Precision ground and polished.
Synthware™ Anti-Climb Adapters
Trap provides extended volume for reactions that have tendency to foam excessively
DWK Life Sciences Kimble™ Kontes™ Fritted Rotary Evaporator Bump Trap
This trap has a 40-60 micron porosity fritted disc sealed between the lower inner and top outer joint to prevent the contents of the flask from entering into the condenser in the event of bumping.
Promotions are available
DWK Life Sciences Kimble™ Kontes™ Rotary Evaporator Traps With Inner Vapor Tube at Top
Design allows for expanded volume for mixtures that have a tendency to foam excessively
Promotions are available
DWK Life Sciences Kimble™ Brand Rotary Evaporator: Bottom Vapor Tube Traps
Accessory for rotary evaporator trap
Promotions are available
Chemglass Life Sciences Vacuum Trap, Serrated Hose Connections, Complete, Trap Bottle 75mm OD x 300mm Overall Length, 71/60 Jt.
Vacuum Trap, Serrated Hose Connections, Complete, Trap Bottle 75mm OD x 300mm Overall Length, 71/60 Jt. Two piece construction for easy removal of condensate. Inlet and outlet are 180º apart for installation into a variety of vacuum systems. Stopper has a standard taper inner joint and body has an outer joint. Body length is the overall length from the top of the joint to the bottom of the round bottom. Serrated hose connections have an O.D. of 13mm at the smallest serration and 16mm at the largest serration.
Chemglass Life Sciences Vacuum Trap, Serrated Hose Connections, Complete, Trap Bottle 60mm OD x 300mm Overall Length, 55/50 Jt.
Vacuum Trap, Serrated Hose Connections, Complete, Trap Bottle 60mm OD x 300mm Overall Length, 55/50 Jt. Two piece construction for easy removal of condensate. Inlet and outlet are 180º apart for installation into a variety of vacuum systems. Stopper has a standard taper inner joint and body has an outer joint. Body length is the overall length from the top of the joint to the bottom of the round bottom. Serrated hose connections have an O.D. of 13mm at the smallest serration and 16mm at the largest serration.
Chemglass Life Sciences Bump Trap, 100mL, Rotary Evaporator, 24/40 Top Outer, 24/40 Lower Inner
Bump Trap, 100mL, Rotary Evaporator, 24/40 Top Outer, 24/40 Lower Inner. Used between the vapor tube and evaporation flask on a rotary evaporator to prevent contents of the flask from being drawn into the condenser in the event of “bumping.” Traps have a 24/40 top outer joint and the listed size of lower inner joint.
Chemglass Life Sciences Bump Trap, 250mL, Self Washing, Rotary Evaporator, 24/40 Top Outer, 14/20 Lower Inner
Bump Trap, 250mL, Self Washing, Rotary Evaporator, 24/40 Top Outer, 14/20 Lower Inner. Trap is designed to eliminate hold up common to the round style of rotary evaporator traps. Tapered sidewalls permit continuous washing with condensed solvent while preventing vapor cooling points along the path of the condenser. The upper stem has 4 large holes flush with the lower end, allowing solvent vapor to flow freely and making this portion of the trap easy to clean. The increased volume of the trap prevents “bumping” and keeps solvent out of the vapor tube.
Chemglass Life Sciences Bump Trap, 100mL, Rotary Evaporator, Modified, 24/40 Top Outer, 14/20 Lower Inner
Bump Trap, 100mL, Rotary Evaporator, Modified, 24/40 Top Outer, 14/20 Lower Inner. Trap provides expanded volume for reactions that have a tendency to foam excessively. The inner vapor tube is sealed to the top of the trap to prevent entry into the condenser. Traps have a 24/40 top outer joint and the listed size of lower inner joint.
Chemglass Life Sciences Bump Trap, 100mL, Rotary Evaporator, Modified, 24/40 Top Outer, 14/20 Lower Inner
Bump Trap, 100mL, Rotary Evaporator, Modified, 24/40 Top Outer, 14/20 Lower Inner. Similar to CG-1320, but with the addition of two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask. Traps have a 24/40 top outer joint and the listed size of lower inner joint.
Chemglass Life Sciences Bump Trap, 250mL, Rotary Evaporator, 24/40 Top Outer, 14/20 Lower Inner
Bump Trap, 250mL, Rotary Evaporator, 24/40 Top Outer, 14/20 Lower Inner. Used between the vapor tube and evaporation flask on a rotary evaporator to prevent contents of the flask from being drawn into the condenser in the event of “bumping.” Traps have a 24/40 top outer joint and the listed size of lower inner joint.
Chemglass Life Sciences Bump Trap, 250mL, Rotary Evaporator, 24/40 Top Outer, 24/40 Lower Inner
Bump Trap, 250mL, Rotary Evaporator, 24/40 Top Outer, 24/40 Lower Inner. Used between the vapor tube and evaporation flask on a rotary evaporator to prevent contents of the flask from being drawn into the condenser in the event of “bumping.” Traps have a 24/40 top outer joint and the listed size of lower inner joint.
Chemglass Life Sciences Bump Trap, 100mL, Self Washing, Rotary Evaporator, 24/40 Top Outer, 14/20 Lower Inner
Bump Trap, 100mL, Self Washing, Rotary Evaporator, 24/40 Top Outer, 14/20 Lower Inner. Trap is designed to eliminate hold up common to the round style of rotary evaporator traps. Tapered sidewalls permit continuous washing with condensed solvent while preventing vapor cooling points along the path of the condenser. The upper stem has 4 large holes flush with the lower end, allowing solvent vapor to flow freely and making this portion of the trap easy to clean. The increased volume of the trap prevents “bumping” and keeps solvent out of the vapor tube.
Chemglass Life Sciences Bump Trap, 250mL, Rotary Evaporator, Modified, 24/40 Top Outer, 29/42 Lower Inner
Bump Trap, 250mL, Rotary Evaporator, Modified, 24/40 Top Outer, 29/42 Lower Inner. Similar to CG-1320, but with the addition of two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask. Traps have a 24/40 top outer joint and the listed size of lower inner joint.
Chemglass Life Sciences Bump Trap, 100mL, Rotary Evaporator, Modified, 24/40 Top Outer, 24/40 Lower Inner
Bump Trap, 100mL, Rotary Evaporator, Modified, 24/40 Top Outer, 24/40 Lower Inner. Trap provides expanded volume for reactions that have a tendency to foam excessively. The inner vapor tube is sealed to the top of the trap to prevent entry into the condenser. Traps have a 24/40 top outer joint and the listed size of lower inner joint.
Chemglass Life Sciences UHMW Lid Only, For Plastic Coated Condenser
UHMW lid replacement part for the CG-1333-10 plastic coated condenser.
- 1
- 2