Column Temperature Control Mantles
Column Temperature Control Mantles
Column temperature control mantles are typically single-unit devices of varied sizes that are installed in laboratory mantles for preheating and precooling purposes. These mantles are petite, convenient to carry and can be mounted vertically. The heater/cooler unit in these mantles typically has a double-insulated cover to maintain the programmed temperature, usually in a range of 4°C (39°F) to 70°C (158°F).
Proper column temperature control is essential for reliable liquid chromatography separations, and column temperature control mantles are used to modify and maintain the temperature of liquid chromatography columns during analysis.
Controlling column temperatures when analyzing via high performance and other liquid chromatography procedures can help improve performance and reduce both analysis time and solvent use. As the column temperature increases, the separation process speeds up and generally becomes more efficient, depending on the compounds involved. Moreover, sample retention factors may change, or components may co-elute, and selectivity can be inverted by small temperature variations.
Many liquid chromatography instruments have a temperature-controlled chamber or oven in which columns can be placed. For instruments without this feature, an external column temperature control mantle may be a good way to maintain column temperatures during separations. The mantles can also be used to pre-heat or pre-cool columns in preparation for the analyses, so that unexpected temperature changes do not affect the results.
Thermo Scientific™ Reacti-Vap™ Evaporator Replacement Parts
Maintain and expand the life of your Thermo Scientific™ Reacti-Vap™ Evaporator module using these quality replacement parts.
Thermo Scientific™ Gas Regulators for Reacti-Vap™ Evaporators
Use these gas regulators to deliver the right amount of gas for sample evaporation using the Thermo Scientific™ ReactiVap™ Evaporator.
Thermo Scientific™ HOT POCKET Column Heaters, Eluent Preheater/Precooler and COOL POCKET Chiller
Thermo Scientific™ HOT POCKET Column Heaters, Eluent Preheater/Precooler and COOL POCKET Chiller offer column heating or cooling in a compact, efficient design.
Thermo Scientific™ Reacti-Vap™ Evaporators
Add evaporation to the Thermo Scientific™ Reacti-Therm™ Heating and Stirring module for derivatization or other small scale reactions.
Phoenix S&T Inc CONTROL ELECTRONICS FOR DUAL

Control electronics for dual-column operation with all cables

Phoenix S&T Inc Butterfly Portfolio Heater (20 cm x 6 cm)

Even, stable(to within 0.2 ºC) temperature throughout the whole hot “pocket” formed by the closed Butterfly heater when controlled by Phoenix S&T’s column heater controller: PST-CHC. Easy placement of chromatographic fittings and columns, including vented columns, in the portfolio when it is “open”, and the closed heater can be placed adjacent to the MS source. Contents of the heater can be conveniently secured in place by heat-resistant tape. Maximum temperature achievable is 100 ºC. Accessories for insulating the union or Tee for high voltage liquid junction inside the heater are available.

Phoenix S&T Inc EXTERNAL HV SWITCHING

External HV switching for the Thermo Nanoflex source upgrade including all cables and accessories
