Test
For proper sampling of powders, pellets and other friable materials which may become non-homogeneous in bags
Easy-to-use, easy-to-clean, galvanized-steel sampling tube.
NC0760003 DSP PWDR THF ST 1000MM20ML 20P
NC2291005 VISCO THIEF DISPO 1500MM 20/CS
Sludge Judge accessories help maintain a long, trouble-free service life. Cleaning brush not recommended for cleaning oil and grease. Use Grease Trap Cleaning Rod in conjunction with Cleaning Strips and a mild detergent to effectively remove oil & grease from plastic tubing.
NC1781485 POWDER SAMPLER 20/CS
Auto Sampler AS 8030 can perform multiple sample measurements continuously including rinsing and drying the measuring cell and tubes in conjunction with KEM DA-860, DA-850, and DA-840 series. In addition, we improved the drying time by using a high-volume drying pump and also enhanced the rinsing performance by using 2 kinds of rinse liquids. Moreover, the instrument has inherited the pressurized measurement function that returns the bubbles generated during sampling such as gasoline into the sample solution.With these improvements, the AS-8030 autosampler can provide operators with a convenient and highly reliable fully automatic measurement system. The number of sample positions is 30 and the size of sample vials is 20mL.
NC2225377 SAMPLER BOTTLE SET W/CAPS
NC2323455 O2 LANCE 140 MM
DISPOSABLE SLOT SAMPLERS HDPE; Non-sterile; 3 slots; volume: 100mL; length: 620mm; diameter: 5 mm; 20 per case
Glass specimen vial has a high-purity certified 12.7 mm SEM pin stub mounted into the plastic cap. It is ideal for collecting forensic evidence with minimum interference and/or contamination from the sampler. The specimen arrives at the lab ready for carbon coating for SEM/EDX investigation. The Forensic Field Sampler can be securely stored in the glass specimen vial and easily shipped with the cap holding the sampler stub in place. Vial is 25 mm OD x 55 mm high.
Pin length: 6 mm
These high pressure pans and covers contain a sample in a sealed environment throughout an experiment. This ensures that the heat generated from vaporization or a volatile reaction does not interfere with the analyzer's measurements.
For use with Autosamplers, these pans are used to prepare sample materials for your DSC Autosampler. These pans and covers are hermetically sealed and may also be used for non-robotic systems.
The Biocolor Sircol™ Soluble Collagen Assay is a quantitative assay for measurement of both acid-soluble and pepsin-soluble collagens. The colorimetric assay is a dye-binding method using Sircol™ Dye Reagent, which contains Sirius Red dye in picric acid. This kit is suitable for all soluble mammalian collagens, Types I to V. The assay can assess the rate of newly synthesized collagen. New collagen is produced during periods of rapid growth and development. New collagen is also generated during inflammation, wound healing and tumor development. The Sircol™ Assay can monitor collagen produced in situ, or during in-vitro cell culture. It can also measure in-vitro extracellular matrix (ECM) formation. Sensitivity: 1.0 µg. Assay Run Time: 1.5 hours. NOTE: This assay is not suitable for covalent cross-linked collagen.
NC1557324 25 AND37MM CALIBRATION ADAPTER