Fume Hoods

Fume Hoods

Fume hoods and enclosures which use venting and air flow to protect users from hazardous substances such as vapors, gases, and particulates; may be designed for specific applications or general purposes. Also includes accessories such as stands.
General Purpose Fume Hoods (68)
Biosafety Cabinets (1)

Filtered Search Results

Products from some of our suppliers do not display in filtered search results. Please clear all filters to see these products.

Narrow Results

Selected Filters

Clear all

special interests

science education Science Education

Narrow Results

Narrow Results

No results found within this category. Try removing some selected filters and try again.

category

brands

  • (1)
  • (68)
  • (1)

special interests

  • (69)
  • (2,232)

Product Type

  • (25)
  • (25)
  • (7)
  • (2)
  • (1)
  • (1)
  • (1)
  • (1)
  • (1)
  • (1)
  • (1)
  • (1)
  • (1)
  • (1)

Lighting Type

  • (35)
  • (21)
  • (1)

Coating

  • (35)

Product Line

  • (24)
  • (7)

Certifications/Compliance

  • (1)

Chamber Material

  • (1)

Material

  • (1)

Sash Opening (Metric)

  • (1)
1 – 20 of 20 results
1

Labconco™ Filtered Fume Hood Accessory, HEPA Filter
SDP SCI_ED

For use with Protector Echo and Airo Filtered Fume Hood

2

Labconco™ Protector™ Filtered Fume Hood Accessory, Acid Gas Sensor
SDP SCI_ED

Replacement sensor for use with Protector Echo and Airo Filtered Fume Hood

3

Labconco™ Protector™ Filtered Fume Hood Accessory, Roughing Prefilter
SDP SCI_ED

For use with Protector™ Echo™ and Airo™ Filtered Fume Hoods. Labconco™ Protector™ Filtered Fume Hood Accessory, Roughing Prefilter removes large particles to extend filter life.

4

Labconco™ Protector™ Filtered Fume Hood Accessory, ADA Remote Control
SDP SCI_ED

For use with Protector Echo™ and Airo™ Filtered Fume Hood. Labconco™ Protector™ Filtered Fume Hood Accessory, ADA Remote Control allows access to fan and light switches through wireless remote control.

5

Labconco™ Protector™ Pass-Through Laboratory Benchtop Fume Hood, 4 ft. Width
SDP SCI_ED

The Protector™ Pass-Through Laboratory Benchtop Fume Hood offers sashes on two sides allowing operation on either side of fume hood.

Height (Metric) 149.9 cm
Depth (English) 33.4 in.
Width (English) 48 in.
Product Type Fume Hood
Depth (Metric) 84.8 cm
Required Accessories Remote blower or ducting to house exhaust, Work surface, Base cabinet or stand
Certifications/Compliance ADA, ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, CFR 29, NFPA 45, SEFA 1, UL 1805, UL 61010
Lighting Type T8 Fluorescent
Width (Metric) 121.9 cm
Pressure CFM/Static Pressure at 100 fpm: With 1 sash fully open, exhausts 775 CFM at 0.33 in. static pressure
Hertz 50/60 Hz
Height (English) 59 in.
6

Labconco™ Protector™ Pass-Through Laboratory Benchtop Fume Hood, 6 ft. Width
SDP SCI_ED

The Protector™ Pass-Through Laboratory Benchtop Fume Hood offers sashes on two sides allowing operation on either side of fume hood.

Height (Metric) 149.9 cm
Depth (English) 33.4 in.
Width (English) 72 in.
Product Type Fume Hood
Depth (Metric) 84.8 cm
Required Accessories Remote blower or ducting to house exhaust, Work surface, Base cabinet or stand
Certifications/Compliance ADA, ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, CFR 29, NFPA 45, SEFA 1, UL 1805, UL 61010
Lighting Type T8 Fluorescent
Width (Metric) 182.9 cm
Pressure CFM/Static Pressure at 100 fpm: With 1 sash fully open, exhausts 1250 CFM at 0.59 in. static pressure
Hertz 50/60 Hz
Height (English) 59 in.
7

Thermo Scientific™ 1300 Series Class II, Type A2 Biological Safety Cabinet Package, 4 ft.. width, 8 in. window, SS package, 120V
SCI_ED

Perform daily applications safely and efficiently with this simple-to-order package, which includes a cabinet, stand, pre-installed UV light and armrests.

8

Labconco™ Basic™ Laboratory Hood
SDP SCI_ED

For areas with low ceilings or narrow aisles, choose the Basic™ Laboratory Hood when outfitting your lab.

Depth (English) 25 in.
Depth (Metric) 63.5 cm
Color Glacier White
Certifications/Compliance ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, CE, NFPA 45, SEFA 1, UL
9

Labconco™ Protector™ Demonstration Hood
SDP SCI_ED

Low-profile, light-duty fume hoods provide close observation of procedures. Labconco™ Protector™ Demonstration Hood designed to provide 360° of close observation of procedures during educational demonstrations.

Depth (English) 29.1 in.
Width (English) 33.6 in.
Product Type Hood
Depth (Metric) 73.9 cm
Width (Metric) 85.3 cm
10

Labconco™ Protector™ XStream™ Fume Hoods
SDP SCI_ED

Offering unsurpassed containment of chemical fumes and vapors while conserving energy when operated at velocities as low as 60 fpm.

Height (Metric) 1.5 m
Product Type Fume Hood
Height (Metric) Sash Opening 71.1 cm
Lighting Type LED
Coating Powder
Height (English) 59 in.
11

Labconco™ Protector™ Premier™ Laboratory Hoods
SDP SCI_ED

Low velocity, high performance fume hoods suitable for general chemistry applications

Depth (English) 31.7 in.
Product Type Laboratory Hood
Depth (Metric) 80.5 cm
Lighting Type LED
Coating Powder
Product Line Protector™ Premier™
12

Labconco™ Protector™ Filtered Fume Hood Accessory, Light Bulb
SDP SCI_ED

Replacement light blub for use with Protector Echo and Airo Filtered Fume Hood

13

Labconco™ Protector™ Filtered Fume Hood Accessory, gGuard Communication Software
SDP SCI_ED

For use with Protector™ Echo™ and Airo™ Filtered Fume Hood

14

Labconco™ 4 ft. Protector ClassMate Laboratory Hood
SDP SCI_ED

Designed to meet the needs of instructional laboratories. Labconco 4 ft. Protector ClassMate Laboratory Hood is a fully-featured benchtop hood with clear back and sides for enhanced visibility for conducting demonstrations or observing students.

Height (Metric) 149.9 cm
Depth (English) 32.7 in.
Width (English) 48 in.
Product Type Benchtop Fume Hood
Depth (Metric) 83 cm
Height (English) Sash Opening 28 in.
Height (Metric) Sash Opening 71.12 cm
Lighting Type LED
Coating Powder
Width (Metric) 121.9 cm
Height (English) 59 in.
Product Line Protector™ ClassMate
15

Labconco™ Protector™ Filtered Fume Hood Accessory, RFID Administrator Authorization Card
SDP SCI_ED

For use with Protector Echo™ and Airo™ Filtered Fume Hood. Labconco Protector Filtered Fume Hood Accessory. authorization cards are required for use and maintenance providing additional safety and data/usage records.

16

Labconco™ Protector™ Filtered Fume Hood Accessory, RFID User Authorization Card
SDP SCI_ED

For use with Protector Echo and Airo Filtered Fume Hood. Labconco™ Protector™ Filtered Fume Hood Accessory, RFID User Authorization Card are required for use and maintenance providing additional safety and data/usage records.

17

Labconco™ Protector™ Filtered Fume Hood Accessory, RFID Maintenance Authorization Card
SDP SCI_ED

For use with Protector™ Echo™ and Airo™ Filtered Fume Hood. Labconco™ Protector™ Filtered Fume Hood Accessory, RFID Maintenece Authorization Cards are required for use and maintenance providing additional safety and data/usage records.

18

Labconco™ Protector™ Pass-Through Laboratory Benchtop Fume Hood, 5 ft. Width
SDP SCI_ED

Protector™ Pass-Through Laboratory Benchtop Fume Hood offers sashes on two sides allowing operation on either side of fume hood.

Height (Metric) 149.9 cm
Depth (English) 33.4 in.
Width (English) 60 in.
Product Type Fume Hood
Depth (Metric) 84.8 cm
Required Accessories Remote blower or ducting to house exhaust, Work surface, Base cabinet or stand
Certifications/Compliance ADA, ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, CFR 29, NFPA 45, SEFA 1, UL 1805, UL 61010
Lighting Type T8 Fluorescent
Width (Metric) 152.4 cm
Pressure CFM/Static Pressure at 100 fpm: With 1 sash fully open, exhausts 1020 CFM at 0.42 in. static pressure
Hertz 50/60 Hz
Height (English) 59 in.
19

Labconco™ 6 ft. Protector ClassMate Laboratory Hood
SDP SCI_ED

Designed to meet the needs of instructional laboratories. Labconco 6 ft. Protector ClassMate Laboratory Hood is a fully-featured benchtop hood with clear back and sides for enhanced visibility for conducting demonstrations or observing students.

Height (Metric) 149.9 cm
Depth (English) 32.7 in.
Width (English) 6 ft.
Product Type Benchtop Fume Hood
Depth (Metric) 83 cm
Lighting Type LED
Coating Powder
Height (English) 59 in.
Product Line Protector™ ClassMate
20

Labconco™ 5 ft. Protector ClassMate Laboratory Hood
SDP SCI_ED

Designed to meet the needs of instructional laboratories. Labconco 5 ft. Protector ClassMate Laboratory Hood is a fully-featured benchtop hood with clear back and sides for enhanced visibility for conducting demonstrations or observing students.

Height (Metric) 149.9 cm
Depth (English) 32.7 in.
Width (English) 60 in.
Product Type Benchtop Fume Hood
Depth (Metric) 83 cm
Lighting Type LED
Coating Powder
Width (Metric) 152.4 cm
Height (English) 59 in.
Product Line Protector™ ClassMate