Water and Wastewater Testing Supplies
Water and Wastewater Testing Supplies
BD Presence-Absence Broth Water Testing Media
Determines the presence of pollution-indicating organisms in treated or drinking water
Thermo Scientific™ Orion™ AQUAfast COD165 Thermoreactor
Conduct environmental and wastewater monitoring with the Thermo Scientific™ Orion™ AQUAfast COD165 Thermoreactor with five preset work temperatures and four preset run times
MilliporeSigma™ Water Detector

Accessory for Milli-Q™ Advantage, Milli-Q Integral, Elix™ Advantage, and Elix Reference water purification systems
MilliporeSigma™ Microbial Count Samplers

Sterilized, individually packaged, ready-to-use dip testers for Total Count and HPC Total Count
Corning™ Coliform Sample Container


Automatically dechlorinates sample
Velp Scientifica™ BOD Control Test Tablet
Velp Scientifica™ BOD Measurement Test Tablet for use with BOD Sensors and BOD EVO Sensors.
InterLab™ Supply Polyseed™ BOD and Polyseed-NX™ CBOD Capsules
Produce fast, economical BOD analyses with consistent results. Available in two formulations.
Thermo Scientific™ Nalgene™ Polycarbonate Imhoff Settling Cone

Determine settleable matter in water and waste effluent and measure the sand content in well water with this settling cone, made of durable polycarbonate with screw closure. (Rack sold separately).

Thermo Scientific™ Orion™ Total Alkalinity Test Kit
Save time by eliminating additional equipment set-up, titrations and calculations with this total alkalinity test kit that provides two-step direct measurement.


MilliporeSigma™ MQuant™ Peroxide Test Strips

To check for presence or absence of residues of Peroxide

MilliporeSigma™ MQuant™ Sulphite Test Strips
To check for presence or absence of residues of Sulphite

Phosphate Buffer Solution, for Chlorine Determination (DPD Methods), Ricca Chemical

For Chlorine Determination (DPD Methods)

Nasco Sludge Judge™ Liquid Sampler Complete Unit

Made from rigid plastic tubing in three 5 ft. (1.53m) sections, provides maximum strength for liquid sampling at long distances

Nasco Sludge Judge™ II Complete Unit

Made from rigid plastic tubing in three 5 ft. (1.53m) sections, provides maximum strength for liquid sampling at long distances

Nasco Sludge Judge™ Ultra Sample Pole Complete Unit

Made from rigid plastic tubing in three 5 ft. (1.53m) sections, provides maximum strength for liquid sampling at long distances

CHEMetrics CHEMets Detergents (Anionic Surfactants, MBAS) Visual Water Test Kit

Provides results in two minutes or less

CHEMetrics CHEMets Dissolved Oxygen, Visual Water Testing Kit

Provides results in two minutes or less

CHEMetrics Mercury-Free COD Vials Kits

Contains premeasured reagents for accurate, economical determination of COD
