Conductivity and TDS Standards
Conductivity and TDS Standards
Conductivity Standard - 25 μmhos/cm, MilliporeSigma™ Supelco™
This Certified Reference Material (CRM) is produced and certified in accordance with ISO 17034 and ISO/IEC 17025. All information regarding the use of this CRM can be found on the certificate of analysis.
Conductivity Standard (500 μS/cm at 25°C, 2.5 KCl (T)), MilliporeSigma™ Supelco™
Conductivity standard can generally be used for the calibration of conductivity measurements. The conductivity standard solution used for conductivity measurements can be sodium chloride or potassium chloride solution of a definite concentration.
Conductivity Standard - 1,412 mhos/cm, MilliporeSigma™ Supelco™
This Certified Reference Material (CRM) is produced and certified in accordance with ISO 17034 and ISO/IEC 17025. All information regarding the use of this CRM can be found on the certificate of analysis.
Conductivity Standard - 75 μmhos/cm, MilliporeSigma™ Supelco™
This Certified Reference Material (CRM) is produced and certified in accordance with ISO 17034 and ISO/IEC 17025. All information regarding the use of this CRM can be found on the certificate of analysis.
Conductivity Standard (3000 S/cm at 25°C), ≤2.5% KCl (T), MilliporeSigma™ Supelco™
Conductivity standard can generally be used for the calibration of conductivity measurements. The conductivity standard solution, which can be used for conductivity measurements can be sodium chloride or potassium chloride solution of a definite concentration.
Conductivity Standard (30000 μS/cm at 25°C), MilliporeSigma™ Supelco™
Conductivity standard may be used for the calibration of conductivity sensors for conductivity measurements. The conductivity standard solution used is sodium chloride or potassium chloride solution of a definite concentration.
- 1
- 2