Butanes, Butenes and Butynes, 15 ppm Each Component in Nitrogen, Analytical Standard, MilliporeSigma™ Supelco™

C1-C6 n-Paraffins, 100 ppm Each Component in Nitrogen, Analytical Standard, MilliporeSigma™ Supelco™

Suitable for qualitative analysis.

ASTM™ D5307 Crude Oil, Quantitative Standard 6.25% (w/w) Each Component, MilliporeSigma™ Supelco™

Equal weights of the hydrocarbons listed. Use to determine detector response factors (slight warming of mixture may be necessary to dissolve all components completely.)

ASTM™ 5442 (C12-C60) Quantitative Linearity Standard, 0.01% (w/w) Each Component in Cyclohexane, MilliporeSigma™ Supelco™

ASTM™ D6584 Standard Solution 5, Certified Reference Material, in Pyridine (varied), MilliporeSigma™ Supelco™

This Certified Reference Material (CRM) is produced and certified in accordance with ISO 17034 and ISO/IEC 17025. All information regarding the use of this CRM can be found on the certificate of analysis.

n-Hydrocarbon Mix 1,000 μg/mL each component in dichloromethane: carbon disulfide (50:50), MilliporeSigma™ Supelco™

Chloroprene Solution, 2,000 μg/mL in Methanol, MilliporeSigma™ Supelco™

C7 - C40 Saturated Alkanes, Standard Certified Reference Material, 1,000 μg/mL Each Component in Hexane, MilliporeSigma™ Supelco™

Quantitative standard suitable for use as a retention index marker probe.

ASTM™ D6584 Tricaprin Solution, 8000 μg/mL in Pyridine, MilliporeSigma™ Supelco™

n-Paraffin Mix C10, C12, C14 & C16, Certified Reference Material, Sold by MilliporeSigma™ Supelco™

TraceCERT™ Polar Column Test Mix, 500 μg/mL, Certified Reference Material, MilliporeSigma™ Supelco™

This certified reference material (CRM) is produced and certified in accordance with ISO/IEC 17025 and ISO 17034. This CRM is traceable to the SI through a primary reference material from a NMI. Certified content incl. uncertainty and expiry date are stated on the enclosed certificate.

ASTM™ D3710 Quantitative Calibration Mix, Certified Reference Material, Sold by MilliporeSigma™ Supelco™

n-Paraffin Mix C7, C8, C9 & C10 Analytical Standard, Sold by MilliporeSigma™ Supelco™

May be used for determining column resolution, retention times, and response factors.

ASTM™ D5441 MTBE Contaminants (High) Mix A, Certified Reference Material, Sold by MilliporeSigma™ Supelco™

ASTM™ D2887 Calibration Mix Analytical Standard, Sold by MilliporeSigma™ Supelco™

Aroclor 1248 is a light yellow to yellow-green colored, commercially available polychlorinated biphenyl product liquid mixture. It consists of tri-, tetra-, and pentachloro congeners.