Petrochemical Standards
Petrochemical Standards
- (1)
- (1)
- (2)
- (3)
- (161)
- (1)
- (1)
- (11)
- (38)
- (2)
- (1)
- (7)
- (2)
- (1)
- (1)
- (1)
- (2)
- (1)
- (4)
- (16)
- (67)
- (3)
- (4)
- (6)
- (1)
- (1)
- (107)
- (53)
- (26)
- (2)
- (4)
- (13)
- (36)
- (3)
- (1)
- (1)
- (27)
- (2)
- (1)
- (2)
- (1)
- (2)
- (1)
- (2)
- (9)
- (1)
- (1)
- (2)
- (1)
- (2)
- (1)
- (2)
- (2)
- (1)
- (1)
- (1)
- (14)
- (2)
- (2)
- (1)
- (1)
- (2)
- (2)
- (2)
- (1)
- (6)
- (2)
- (1)
- (2)
- (1)
- (2)
- (2)
- (1)
- (1)
- (5)
- (1)
- (2)
- (2)
- (4)
- (7)
- (6)
- (8)
- (5)
Filtered Search Results
C8-C40 Alkanes Calibration Standard in Dichloromethane (varied), MilliporeSigma™ Supelco™
Qualitative standard. May require warming before use.
ASTM™ D5307 Crude Oil, Quantitative Standard 6.25% (w/w) Each Component, MilliporeSigma™ Supelco™
Equal weights of the hydrocarbons listed. Use to determine detector response factors (slight warming of mixture may be necessary to dissolve all components completely.)
ASTM™ D5442 C12-C60 Quantitative Linearity Standard, Sold by MilliporeSigma™ Supelco™
ASTM(R) D5442 Quantitative Linearity Standard consists of mixes of n-paraffins used for determining column resolution, retention times, response factors, and internal standard preparation. Each component is 0.01% (w/w) in cyclohexane.
Hydrocarbon Mix, Certified Reference Material, 1,000 μg/mL Each Component in Cyclohexane, MilliporeSigma™ Supelco™
This Certified Reference Material (CRM) is produced and certified in accordance with ISO 17034 and ISO/IEC 17025. All information regarding the use of this CRM can be found on the certificate of analysis.
Fuel Oil #4, Restek
Supplier Diversity Partner
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More
Multi-Element Organometallic Oil Standards 23 Element, 100μg/g; SPEX CertiPrep™
Supplier Diversity Partner
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More
Small and/or diverse supplier based on Federal laws and SBA requirements.
Learn More
ISO/IEC Guide 34 Certified, NIST-Traceable Certified Reference Material
Concentration or Composition Notes | Up to 68 elements are scanned with found values for ICP and ICP-MS standards. The found value of the trace metallic impurities is reported on the Certificate of Analysis. |
---|---|
For Use With (Equipment) | AA, ICP, ICP/MS, IC, XRF, and Other Analytical Instrumentation |
Health Hazard 1 | Causes skin irritation, serious eye irritation |
Packaging | Triple-leached LDPE bottle |
DOT Information | Nonhazardous |
Chemical Name or Material | 23 Element Oil Standard |
Recommended Storage | Ambient |
Solvent or Matrix | Base Oil 75 |
Analyte or Component Names | Al,Ba,B |
TraceCERT™ Hydrocarbon Test Mix, Certified Reference Material, MilliporeSigma™ Supelco™
This certified reference material (CRM) is produced and certified in accordance with ISO/IEC 17025 and ISO 17034. This CRM is traceable to the SI through a primary reference material from a NMI. Certified content incl. uncertainty and expiry date are stated on the enclosed certificate.
ASTM™ D2887 Reference Gas Oil Analytical Standard, Sold by MilliporeSigma™ Supelco™
This sample is a petroleum fraction with a boiling range from 250° to 850°F, evaluated in round-robin studies by the ASTM. Use this sample and the supplied ASTM boiling range consensus values to evaluate system performance.
n-Paraffin Mix C7, C8, C9 & C10 Analytical Standard, Sold by MilliporeSigma™ Supelco™
May be used for determining column resolution, retention times, and response factors.