MilliporeSigma™ Supelco™ Visiprep™ Large Volume Sampler

For continuous 'hands off' direct transfer of multiple liquid samples. Large volume sampler enables you to transfer low viscosity samples directly from any sample container to conventional solid phase extraction tubes on a Visiprep SPE vacuum manifold.

Catalog Number	Mfr. No.	Description	Includes
11-101-6309	MilliporeSigma™ Supelco™ 57275	For use with 3 or 6 mL SPE tubes	4 adapters
11-101-6308	MilliporeSigma™ Supelco™ 57272	For use with 12, 20, or 60 mL SPE tubes	3 adapters

Description

Two samplers are available. One sampler has three tube adapters compatible with 12 mL, 20 mL, or 60 mL polypropylene SPE tubes. Simultaneous extraction of 12 samples on a 12-port Visiprep manifold requires four of these samplers. The other sampler has four tube adapters for 3 mL or 6 mL SPE tubes. To simultaneously extract 12 samples, three samplers are required. The samplers consist of 1/8-inch PTFE tubing with a screw fitting at one end and a stainless steel weight at the other end.

To use the sampler, feed the weighted end into a sample container until it touches the bottom. Insert the tube adapters into the conditioned SPE tubes on your Visiprep manifold. Turn on the vacuum to the Visiprep manifold and open the manifold flow control valves, and the samples will be delivered to the SPE tubes. The flow rate of sample through each tube can be independently controlled by using the flow control valves.

Both the screw fittings and the PTFE tubing on the samplers are color coded for easy sample identification. Also fits Preppy SPE Vacuum Manifold.

Note: The Visiprep Large Volume Sampler can only be used with polypropylene SPE tubes. You must equip alternate manifold valves with long stem flow control knobs to accommodate 12 mL, 20 mL, or 60 mL SPE tubes.

Specifications

• For Use With (Application): Food and Beverages
• Product Line: Visiprep
• Type: SPE Accessory

Visiprep is a trademark of Sigma-Aldrich Co. LLC