Labconco™ Purifier™ Cell Logic™+ Class II B2 Biosafety Cabinets with Scope-Ready and Temp-Zone

Microscope-ready B2 biohazard cabinets with advanced ergonomic design excel in user comfort and functionality

Supplier:  Labconco™ 343481031

Catalog No. 34-348-1031

Description

All models feature:

• Electronically Commutated Motor (ECM)
• Constant Airflow Profile (CAP) airflow monitoring system
• Intrinsically-safe negative pressure design
• Air-Wave Entry System
• Contain-Air Negative Pressure Channel
• Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available
• Interior-mounted, line-of-sight, color LCD with MyLogic OS displays filter life, status messages for alarm conditions and alerts. 8 languages available
• Bright, 90 to 150 footcandle, glare-free LED lighting located outside the contaminated work area
• Fully-closing, clear 1/4 in. tempered safety glass sash
• Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots
• Two electrical duplex receptacles. Flush-mounted-stainless steel with dampened hinges. Single outlets on 230 V models. One outlet on each side, with ground fault interruption (115 V)
• Smart-Start™ System user-programmable start up and shut down
• Leak-tight stainless steel interior and powder-coated steel exterior
• Removable towel catch located under work surface
• Code-activated electronic security lock
• 22.6 in. (57 cm) max. sash opening and 27 in. (69 cm) viewing height
• 10° Angled sash with counterbalanced, easy lift mechanism
• ADA-Compliant touchpad control on right side post
• Removable, seamless type 304 stainless steel, dished work surface with lift out knobs
• Scope-Ready™ Package consisting of 7 in. wide x 10.5 in. high (18 x 27 cm) sash cutout and Pure-Vu™ Seal with powder-coated steel collar. Stand-Still™ Isolation Platform is required and sold separately
• Temp-Zone™ Package consisting of temperature-controlled work area, 10.5 in. (27 cm) wide x 12.0 in. (30 cm) deep (7.0 x 12 in. on 3 ft. models) located on the left side of the work surface. Circulator is required (not included). Circulator requirements: minimum flow rate of 0.4 to 0.5 GPM (1.5 to 1.9 LPM), typical volume of 6 liters, and temperature of 0 to 50° C (chiller/heater)
• Noise level <63 dBA
• Heat load 990 BTU/hour (4 ft. models)
• Nominal inflow velocity of 105 fpm (0.5 m/sec)
• Nominal downflow velocity of 55 fpm (0.3 m/sec)
• 10 ft. (3 m) power cord with plug
• Five year warranty
• NSF International compliant
• Optional NSF-approved non-welded telescoping base stand included on some models
• Optional Accessory Package (ADA-compliant service fixture(s) with ball-type valve(s) and NSF-Approved Vacu-Pass™ Cord and Cable Portal) included on some models
• All models require supporting base if non-welded stand option is not selected

Specifications

• Certifications/Compliance: NSF compliant, CE Conformity marking, ADA-compliant, ISO 5 conditions per ISO 14644-1 and 2
• Width (Metric) Interior: 123.2 cm
• Model: Purifier Cell Logic+
• Outlets: 2
• Power Consumption: 170 W
• Height (English): 72.6 in.
• Width (English) Exterior: 54.3 in.
• Width (Metric) Exterior: 137.922 cm
• Lighting: LED
• Sash Opening (English): 8 in.
• Warranty: 5 Years
• Width (Metric): 137.922 cm
• Depth (English) Exterior: 31.2 in.
• Electrical Requirements: 230 V, 50/60 Hz, 6 A

• Chamber Material: Stainless Steel
• Product Type: Type B2 Biosafety Cabinet
• Noise Level: <63 dBA
• Plug Type: Schuko (230 V)
• Receptacles: 2
• Sash Opening (Metric): 20.3 cm
• Volume (Metric) Exhaust: 0.382 m³sec.
• Includes: Cabinet with Accessory, Temp-zone, Scope-ready Packages
• Height (Metric): 184.404 cm
• Service Fixtures: One
• Width (English) Interior: 4 ft.
• Frequency: 50/60 Hz
• Depth (Metric) Exterior: 79.248 cm
• Voltage: 230 V