Phipps & Bird PB-900 Series Programmable Jar Testers

Elevate jar testing to a higher level of precision

Includes: Tester; standard round, 1L glass beakers or B-KER²™ square, 2L acrylic testing jars; 100/240VAC adapter; fluorescent lamp floc illuminator in jar tester base; Two- and four-paddle versions also include a carrying case.

Catalog Number	Mfr. No.	Includes
15-443-720	Phipps & Bird 7790900	6 paddle tester, 6 round glass beakers (1L), LED illuminator, 100/240VAC adapter; fluorescent lamp floc illuminator in jar tester base
15-443-721	Phipps & Bird 7790910	6 paddle tester, 6 beaker square acrylic jars (2L), 100/240VAC adapter; fluorescent lamp floc illuminator in jar tester base
15-443-722	Phipps & Bird 7790950	4 paddle tester, 4 round glass beakers (1 L), 100/240 V adapter, fluorescent lamp floc illuminator in jar tester base; carrying case
15-443-723	Phipps & Bird 7790960	4 paddle tester, 4 beaker square acrylic jars (2 L), 100/240 V adapter, fluorescent lamp floc illuminator in jar tester base; carrying case
15-443-724	Phipps & Bird 7790980	2 paddle tester, 2 beaker square acrylic jars (2 L), 100/240 V adapter, fluorescent lamp floc illuminator in jar tester base; carrying case

Description

Elevate jar testing to a higher level of precision

These jar testers improve precision with four operator-programmable memory banks that provide virtually unlimited stirring capabilities. Each memory bank may be programmed with paddle speeds from 5 to 300 rpm in 1-rpm increments and run times from 1 second to 59 minutes, 59 seconds in 1-second increments. Turning the stirrer off does not erase the programmed information. The stirrer may be run independently in any one of the memories, continuously at a selected speed or sequentially through the memory banks. Running it in sequential mode permits automatic transitioning from a fast mix/short run to a slow mix/long run, or any combination or speeds and times desired to replicate actual plant conditions and operation.

• Available in benchtop six-paddle and portable two- and four-paddle versions
• Built on a powder-coated steel uniframe chassis
• Built-in flluorescent lamp floc illuminator in jar tester base
• Feature 2.54 × 7.62cm (1 × 3 in.) stainless steel paddles, spaced 15.24cm (6 in.) apart
• Allow for paddle adjustment to 22.86cm (9 in.) maximum depth
• Power: 24 VDC with 100–240 VAC adapter

Provides consistently reproducible results to assist water and wastewater treatment plants in determining optimal dosing for specific conditions

Certifications

CE Marked

Warranty and Services

1 Year

Specifications

• Voltage: 120/240 V
• Frequency: 50/60 Hz
• Warranty and Service Offering: 1 Year
• Type: Programmable Jar Tester

• Electrical Requirements: 120/240 V, 50/60 Hz
• Certifications/Compliance: CE
• Material: Powder-coated Steel Chassis, Stainless Steel Shafts and Paddles