Masterflex™ I/P™ Digital Process Drives

Precision Masterflex™ I/P Digital Process Drives offer washdown capability, programmable dispensing, and accurate low-maintenance motors

Supplier:  Masterflex™ MFLX7742018

Catalog No. 11-747-356

Includes: 6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.

Description

• Minimum flow rate is 0.0006 LPM (0.0001 GPM); maximum flow rate is 19 LPM (5.0 GPM) with the I/P High-Performance pump head or 26 LPM (6.9 GPM) with two stacked I/P Easy-Load or Standard pump heads
• Housings are NEMA 4X (IP66) rated for washdown
• Graphical LCD shows four operating modes continuous run, timed dispense, copy dispense, volume dispense. View pump performance continually.
• Menu-driven interface lets you select one of seven languages for programming and operation
• Dispense by Volume in mL (0.001 to 99999 mL), L, or gal; Copy—1 to 9,999 dispense cycles; or Time—time interval of on/off cycles (1 sec to 99 hr, 59 min, 59 sec per cycle)
  Reversible motor—purge tubing before or after pumping; pump fluid in either direction
• Brushless, maintenance-free motor offers ±0.1% speed control accuracy with a 6000 to 1 turndown ratio
• Stack 2 pump heads with any tubing formulation for increased flow rates and for multichannel applications
• Remote control capabilities via watertight connection:
• Speed control input scalable 0 to 20 mA, 4 to 20 mA, or 0 to 10V
• Pumping direction requires open collector or contact closure
• Start/stop/purge requires open collector or contact closure
• Tachometer output scalable 0 to 20 mA, 4 to 20 mA, 0 to 10V, open collector

Certifications

CE; IP66

Compliance

ISO 9002 registered

Warranty and Services

2 Years

Specifications

• Accuracy: ±0.1%
• Certifications/Compliance: CE
• Control Type: Digital Variable Speed
• Display: Graphical LCD
• Flow Rate: 0.6 to 26,000 mL/min., depending on pump head, tubing size, and rpm
• For Use With: I/P Standard, I/P Easy-Load, I/P High-Performance
• Horsepower: 280
• Includes: 6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.
• Model: I/P
• Overall Height (English): 12.9 in.
• Overall Length (English): 16.7 in.
• Overall Width (English): 11.1 in.
• Remote Control: 0 to 20 mA, 4 to 20 mA, 0 to 10 V, start/stop, direction, and prime via contact closure
• Sensors: Open-head
• Wattage: 280 w
• Voltage: 90/260 V

• Amperage: 4.5 A
• Color: Silver
• Description: Masterflex I/P Digital Process Drive, Stainless Steel, with Open-Head Sensor; 650 rpm
• Electrical Requirements: 90/260 VAC 50/60 Hz
• For Use With (Application): Fluid handling
• Frequency: 50/60 Hz
• IP Rating: IP66
• Material: Stainless Steel
• No. of Pump Heads: Accepts 2, Pump heads not included
• Overall Height (Metric): 32.8 cm
• Overall Length (Metric): 42.4 cm
• Overall Width (Metric): 28.2 cm
• Reversible: Yes
• Speed Control: Digital Variable Speed
• Weight (English): 45 lb.
• Speed: 0.1 to 650 rpm