Labconco™ WaterPro™ PS/UF Polishing System for Life Science Use

Labconco WaterPro™ PS/UF Polishing System for Life Science Use delivers Type I, 18.2 megohm-cm, pyrogen-free (upto 0.06 eμ/mL) water with TOC less than 10ppb.

Supplier:  Labconco™ 9000740

Catalog No. 90-007-40

Description

• Timed dispense for unattended operation
• Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time
• LED flashes actual megohm-cm when water quality falls below set point (water quality alert)
• Dispense manually from a valve or with dispensing gun at rate of 1.1L/min.
• UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter

• Corrosion-resistant Type 304 stainless steel front panel
• Unpigmented virgin natural polypropylene bowls w/o impurities to contaminate water
• Quiet 1/4 hp motor and rotary vane recirculation pump
• Moisture sensor detects leak and signals inlet valve to close and pump to shut down
• Wall mountable

Certifications

ETL listed (115V models); CE marked (230V models).

Specifications

• Certifications/Compliance: CE
• Flow Rate: 1.8
• Resistivity: 18.2
• Type: PS/UF Polishing System without Dispensing Gun
• Plug Type: US
• Purification Method: Carbon filtration, deionization, ultrafiltration, ultraviolet oxidation
• Width (English): 31.1 in.
• Height (English): 30.1 in.
• Depth (English): 7.5 in.
• Weight (English): 85 lb.
• Electrical Requirements: 230 V 50/60 Hz
• Frequency: 50/60 Hz

• Feedwater Source: Pretreated Tap Water
• Product Water Type: Type 1
• Total Organic Carbon: >10
• Model: WaterPro PS/UF
• Power Supply: 2.5 A
• Purity: TOC Less than10 ppb, pyrogen-free to 0.06eμ/mL
• Width (Metric): 78.9 cm
• Height (Metric): 76.4 cm
• Depth (Metric): 19 cm
• Weight (Metric): 38.6 kg
• Voltage: 230 V