Labconco™ Goldfisch Fat/Oil Extractor
Recognized by AOAC for determining fat and oil content in samples
Supplier: Labconco™ 3500100
Solvents with boiling points not exceeding 85°C (185°F) may be used. Process involves placing sample between boiling solvent and cold surface. As boiling continues, solvent vaporizes, condenses on cold surface and washes down through sample into boiling solvent below. Solvent chamber is a beaker which is weighed before extraction begins and after final evaporation. Difference between these two weighings indicates amount of extract. Process takes four hours.
- Complete for six samples
- Requires connection to water source
Dimensions: 9L × 35 3/4W × 26 7/8 in.H (23 × 91 × 68cm). Shipping weight: 69 lb. For 115V 50/60Hz, 600w. Base cabinet not included.
Acceptable for AOAC method.
|Goldfisch Fat/Oil Extractor|
|Acceptable for AOAC method|
|115 V 50/60 Hz|
|Six spring-loaded, 100w heaters, automatic pressure relief valves to relieve pressure buildup in condensers (reset themselves to create a closed system for extraction) 12 borosilicate glass 100mL beakers six for test and six spares|
|9 x 35.7 x 26.88 in. (23 x 91 x 68 cm)|
We continue to work to improve your shopping experience and your feedback regarding this content is very important to us. Please use the form below to provide feedback related to the content on this product.
Your feedback has been submitted. Fisher Scientific is always working to improve our content for you. We appreciate your feedback.Ok