Dimethyl Sulfoxide (Certified ACS), Fisher Chemical™

Description

Note: Sold for nonmedical use only. Not to be used or sold as a drug for humans or animals

Specifications

• Melting Point: 18.4°C
• Acidity: Pass Test (USP)
• Assay Percent Range: 99.9 % (CH₃)₂SO Minimum
• Linear Formula: (CH₃)₂SO
• Appearance: Clear, Colorless Liquid
• Solubility Information: Soluble starch and sulfate: Pass Test (USP), 15 ppm max. (EP/BP)
• Formula Weight: 78.13
• Percent Purity: ≥99.9%
• Grade: Certified ACS Reagent
• Concentration or Composition (by Analyte or Components): Dextrin: Pass Test (USP, EP/BP)
• Decomposition Information: >190°C
• Density: 1.100g/cm³
• Boiling Point: 189°C
• Quantity: 4 L
• Flash Point: 87°C (188.6°F)
• Identification: Pass Test (USP, EP/BP)
• Packaging: HDPE Bottle
• Physical Form: Liquid
• Residue after Evaporation: 0.01% max.
• Titratable Acid: 0.001mEq/g max.
• Vapor Pressure: 0.55mbar at 20°C
• Viscosity: 1.98 mPa/s at 25°C
• Water: 0.1% max.
• Chemical Name or Material: Dimethyl Sulfoxide

Safety and Handling

WARNING!

Emergency Overview
Combustible liquid. DMSO readily penetrates skin and may carry other dissolved chemicals into the body. Hygroscopic. Use personal protective equipment. Keep away from open flames, hot surfaces and sources of ignition. Ensure adequate ventilation. Wash off immediately with plenty of water for at least 15 minutes. Get medical attention immediately if symptoms occur. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Obtain medical attention. Move to fresh air. If breathing is difficult, give oxygen. If breathing is difficult, give oxygen. Get medical attention immediately if symptoms occur.

NFPA

Health:2
Flammability:2
Instability:0

SDS