Test
Fill these unbreakable polyethylene straight tubes with a desiccant. Tubes supplied with fittings that accept 0.25 - 0.375 in. tubing.
Fits Tubing | 6.4 to 9.5 mm |
---|---|
Length (Metric) Tip | 22 mm |
Material | Polyethylene |
Length (English) Tip | 0.87 in. |
Bent at 75° for use in fume hoods where a vertical-type tube won't fit
Bulb desiccant chamber
Drying tube is used to protect moisture sensitive reactions from atmosphere while permitting system to remain unsealed. For microscale applications
Product Type | 90° Bent Drying tube |
---|---|
For Use With (Application) | Organic Synthesis |
Silver diethyldithiocarbamate method
Complete with glass outer tube and inner plug
Fill these unbreakable polyethylene straight tubes with a desiccant. Tubes supplied with fittings that accept 0.25 - 0.375 in. tubing.
Fits Tubing | 6.4 to 9.5 mm |
---|---|
Length (Metric) Tip | 22 mm |
Material | Polyethylene |
Drying Tube, Schwartz, 130mm Wide x 145mm Height. Schwartz type drying tube having 14/20 hollow stoppers. Stoppers have a hole that aligns with a serrated hose connection for on/off action. Overall height is approximately 170mm.
NC1997335 EASYPLUS DRYING TUBE
1mL Craig Tube, Glass Only. Used for microscale recrystallizing of small quantities of reaction product. Consists of a glass outer tube with a non-uniform grind to purposely allow leakage.
Tube, drying, 14/20 top, 14/20 bottom
17 x 100mm Schwartz drying tube with standard taper stoppers.
The 75 angle drying tube is for use in fume hoods where space is at a minimum. Supplied complete with rubber stopper, glass inlet tube, and a lower inner joint.
NC0953578 DRYING TUBE SET OF 4