Metrohm USA
Metrohm USA is dedicated to providing you with the best, most reliable instruments, supported by a sales and applications staff.
Metrohm USA Septum 16 mm, Set of 5 pieces
Septum 16 mm, 5 pieces. Height 2mm; Material: Silicone rubber; Outer diameter 16mm
Metrohm USA SAMPLE VIAL 6.2419.000 6ML
Sample vial 6 mL / 100 vials per pack. Suitable for the 6.1448.05X septum. Utilization for KF determinations with oven.
Metrohm USA GENERATOR ELEC W/O DIAPHRG
Generator electrode for Karl Fischer titrations, without diaphragm, SGJ 29/22. Specs: Electrode plug-in head - Metrohm plug-in head G; Indicator electrode type - Cathode = Pt sheet; Indicator electrode type (reference) - Anode = Pt grid Min. immersion depth (mm) - 15; Shaft diameter bottom (mm) - 24; Shaft diameter top (mm) - 24; Shaft material - Glass; Temperature range, long-term (C) - (-20) to 70; Temperature range, short-term (C) - (-20) to 70.
Metrohm USA Lithium chloride/ETOH | 7447-41-8 | MFCD00011078 | 250 mL
Lithium chloride/ETOH | Mol Wt: 42.39 | 7447-41-8 | MFCD00011078 | 250 mL
Metrohm USA UNITRODE COMB PH 6.0259.100
Metrohm Unitrode glass electrode is a high performance in difficult samples and at high temperatures. Bridge electrolyte type: c(KCl) is 3 mol/L. Diaphragm: fixed ground-joint diaphragm. Electrode plug-in head: Metrohm plug-in head G. Electrode slope > 0.97.
Metrohm USA Ag Titrode
Combined silver ring electrode with a pH glass membrane as reference electrode.This maintenance-free electrode is suitable for precipitation titrations when the pH value remains constant (titrant silver nitrate), for example of: chloride, bromide, iodide;sulfideshydrogen sulfide; mercaptans;cyanides. This electrode is stored in distilled water.Depending on the application, we recommend using an Ag Titrode with a coating (AgBr, AgCl or Ag2S coating), which can be ordered accordingly.
Metrohm USA Storage solution for all combined pH glass electrodes with reference electrolyte c(KCl) = 3 mol/L
Storage solution for all combined pH glass electrodes with reference electrolyte c(KCl) = 3 mol/L, 250 mL. Long-term storage in KCl damages the glass as it results in ever-increasing response times. The patented 6.2323.000 Storage solution for combined pH glass electrodes has been developed to solve this problem. If a combined pH glass electrode is kept in the Storage solution then the performance of the glass membrane does not change regarding response time and the alkali error. If c(KCl) = 3 mol/L is additionally used as the reference electrolyte then the optimized composition of the Storage solution guarantees that the pH glass electrode is always ready for immediate use. Conditioning before the measurement is not necessary, no matter how long the electrode has been stored.
Metrohm USA METROSEP A SUPP 4/5 GUARD
The Metrosep a Supp 4/5 Guard/4.0 reliably protects the Metrosep a Supp 4, 5 and 7 IC anion columns against contamination from the sample or the eluent. It contains the same separation material as the Metrosep a Supp 5, is also made of PEEK, and is screwed directly onto the respective separation column with nearly no dead volume ( in.On Column Guard System in.). The guard column prolongs the service life of the analytical column, with practically no influence on its chromatographic separating efficiency. The economical price and simple handling make using the a Supp 4/5 Guard/4.0 highly recommended.